







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Denton Owner’s Guide
Kitchen remodeling in a Dvele home in Denton typically runs $14,000 – $45,000 for a full job, and smaller scope work like cabinet installation lands at $4,000 – $13,000. A failed cabinet box, a delaminating countertop edge, or a hinge that won’t hold usually shows up first as a soft spot or a door that drags. We install and replace Dvele-compatible kitchen components across Denton with a written price before anything starts and the 365-Day Done Right Promise on the finished work.

Bradford Remodeling Co Denton is an independent service provider. We are not affiliated with Dvele.
Key Takeaways
- Dvele kitchen remodels in Denton run $14,000 – $45,000 installed, priced in writing before work begins.
- Smaller jobs are honest options too: cabinet installation at $4,000 – $13,000, countertops at $2,000 – $6,500, backsplash at $800 – $2,500.
- Every finished project carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and fix it at no charge.
- A live person answers the phone 24/7 at (844) 651-3175.
Which Dvele Models This Applies To

Dvele builds modular and panelized homes, which means the kitchen sometimes arrives with factory-specified millwork tolerances tighter than a site-built house. Before we touch anything, we match the part to the actual model line, not just the brand. The data plate or spec book that came with your Dvele home is the starting point. Look for the model designation and the kitchen package documentation. From there we match cabinet box depth, hinge pattern, and drawer slide length to the line the home was delivered with.
The compatibility gotcha most Denton owners run into: Dvele kitchens often use metric hardware spacing borrowed from the factory panel system. Standard American cabinet hardware won’t line up with the existing boring. We measure the center-to-center distance on hinge holes before ordering anything, so you don’t end up with doors that don’t sit flush or slides that bind. OEM parts hold the original fit. Quality aftermarket equivalents (KraftMaid and Wellborn cabinetry, Cambria and Caesarstone tops) can cost less and last just as long, but they need a real spec match, not a guess. We walk Denton homeowners through both paths with the price on paper.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
Denton’s swings between humid spring and dry summer work wood. That cycle drives most of what we see here, and it shows up before the failure is obvious.
- Cabinet doors that drag or won’t stay closed. Hinges have lost tension or the anchor screws have pulled, usually from seasonal wood movement rather than abuse.
- Soft or swollen substrate at the sink base. Moisture has reached the particleboard or MDF core. Once it swells, it doesn’t shrink back, and the whole base cabinet has to come out.
- A countertop edge that lifts or a backsplash that won’t stay tight. Adhesive has failed under the Dvele factory-installed top or a caulk line has let go at the wall joint.
- Drawer slides that grind or stick mid-travel. The slide is worn or out of alignment from a box that has shifted off square.
- Repeated caulk failure around the backsplash and wall corners. Movement between the panelized kitchen wall and the frame under Denton heat is a common source here.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Denton kitchen work, part and labor included, with the price in writing before we start:
| Scope | Installed price range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation (incl. Dvele-compatible millwork) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves you up the range: cabinet run length, whether the countertop is a reload or a fresh slab, and whether the rough-in behind the wall needs correction. What we include every time: the written price, background-checked and uniformed technicians, and a documented scope you sign. Every completed job carries the 365-Day Done Right Promise. If the work fails inside that first year, we return and correct it at no charge. Call (844) 651-3175 to schedule your free estimate.
DIY or Call Us?
Some of this is safe to check yourself. Open the cabinet doors, feel the substrate at the sink base, run a level across the countertop edge, and confirm the hinge and slide specs against your Dvele documentation. That tells you what’s actually failing. What we don’t recommend: pulling a countertop slab or removing a sink base yourself. The slab is heavy and the plumbing and electrical behind the wall need to be shut off and rerouted correctly. A misplaced cut in a Cambria or Caesarstone surface can’t be undone, and a slab that comes loose is a real injury risk.
We also work with KraftMaid, Cambria, and Silestone on Dvele kitchens, so parts and finishes are traceable from manufacturer to install. Call (844) 651-3175 and we’ll give you a written price. A live person answers 24/7.
FAQs

Expect 15 – 20 years from a quality cabinet box with a solid wood or plywood core, and 8 – 12 years from MDF or particleboard that sees sink-base moisture. In Denton, the dry-summer/humid-spring swing costs you a few years on the low end. Call (844) 651-3175 for an exact quote – estimates are free.
Often yes. A single worn hinge, a loose slide, or a lifting backsplash edge can be repaired or reset without touching the cabinet box. Swollen sink-base substrate or a delaminated countertop edge is a replacement, not a repair. We’ll tell you which one you have in writing before work starts. Call (844) 651-3175 for your free estimate.
A single cabinet or door swap is a half-day job. A full cabinet run is 2 – 4 days. A countertop or island replacement runs 1 – 3 days depending on the slab and the rough-in corrections. You’ll have the written schedule before we start. Call (844) 651-3175 to get it on the calendar.
We start with your model documentation, match the hardware, box depth, and finish spec, then order from a documented manufacturer roster. Where OEM isn’t available, we match a KraftMaid, Wellborn, Cambria, or Caesarstone equivalent to the same spec. Every part is traceable, and the price is in writing. Estimates are free – call (844) 651-3175.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












