







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Denton Owner’s Guide
We install Boxabl-compatible bathroom remodeling in Denton, and most full bathroom projects run $9,000 to $28,000 installed, while smaller refreshes land between $5,000 and $12,000. This isn’t an emergency call – it’s planned work, and we schedule it like planned work. Written price first, crew scheduled, job done on the agreed timeline.

Owners usually come to us after the shower pan starts flexing underfoot, or the factory vanity top chips at the edge and the substrate shows through. Sometimes it’s a slow leak at the drain collar that’s been staining the flooring for weeks. In Denton, we see these failures cluster after the long dry summers – the substrate dries and shrinks, then the first hard rain pushes moisture into gaps that weren’t there in spring. Boxabl’s unit construction is tight and consistent, which is good news: the bathroom modules are standardized, so the remodel scope is predictable and priced honestly.
Which Boxabl Models This Applies To

Boxabl’s Casita line, from the original 375-square-foot unit through the current configurable models, uses the same factory bathroom core: a molded shower surround, a compact vanity, and a toilet rough-in set on a standardized wall panel. When we quote a bathroom remodel for a Denton Boxabl, the model year matters more than the model name – the fixture mounting points shifted slightly between early production runs and later ones, and the drain rough-in measurement is where we see the most compatibility mistakes. A contractor who hasn’t measured that rough-in will order a vanity that won’t clear the supply lines.
To identify your unit, check the data plate inside the cabinet under the bathroom sink – it lists the production series and the rough-in spec. If the plate is missing, we measure the supply line spacing and the toilet flange offset directly. On the OEM-versus-aftermarket question: Boxabl’s factory fixtures are functional but built to a price point. Quality aftermarket parts – a Kohler or Moen shower valve, a solid-surface vanity top – fit the standardized rough-in and last longer in Texas heat cycles. We specify our materials from a documented roster so the part you get has a manufacturer spec sheet behind it, not a guess. We’re an independent service provider, not affiliated with Boxabl, but we know the product well enough to match parts correctly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
- Shower pan flexes or feels spongy underfoot. The substrate has lost adhesion to the molded pan, usually because of thermal movement at the drain collar. Left alone, it cracks the pan and leaks into the subfloor.
- Vanity top chips at the edge, exposing the core. Boxabl’s standard top is a thin laminate over particleboard; in Denton’s low winter humidity the board dries and the laminate lifts. A solid-surface replacement stops the failure at the source.
- Caulk lines at the surround-to-wall junction keep reopening. That’s not bad caulk – it’s movement between the factory wall panel and the surround. A flexible sealant rated for high movement buys time; a proper remodel fixes the joint.
- Water stains on the flooring near the toilet flange. The wax ring has compressed or the flange sits slightly proud of the finished floor. Every flush pushes a little moisture past it.
- Shower valve handle gets stiff or drips. The cartridge has scaled up from Denton’s hard water. A cartridge swap is a quick fix; a full valve replacement is the long-term answer.
If you’re seeing two or more of these at once, the bathroom is telling you the factory assembly has reached the end of its service life for your water and climate conditions. That’s normal. The fix is predictable.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for a Boxabl bathroom remodel in Denton, with real numbers:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Shower replacement: $3,000 – $8,500
- Tub-to-shower conversion: $3,500 – $10,000
- Vanity installation: $800 – $3,000
- Walk-in shower installation: $4,500 – $12,000
The range is driven by fixture grade (a Kohler valve and solid-surface top sit at the top; a like-for-like replacement sits at the bottom), whether the substrate needs repair once we open it, and whether you want a tiled shower versus a molded surround. The price you get is a written price before work starts – parts and labor itemized, no change-orders unless you change the scope. Every completed project carries our 365-Day Done Right Promise: if the work fails within the year, we return and correct it at no charge. We work with documented brands including KraftMaid, Cambria, and Silestone on the vanity and surface side.
DIY or Call Us?
You can safely check the data plate, measure the rough-in, and look for staining or soft spots. What you shouldn’t do is remove a shower pan or open a wall to inspect the rough-in yourself – the pan sits over a waterproofing membrane, and once that membrane is disturbed, a small leak becomes a rot problem that costs three times more to fix. We’ve pulled pans where a homeowner’s “quick look” had sliced the membrane and the subfloor was soft across the whole footprint. Same for electrical: if you’re adding a heated floor or a new GFCI outlet for a vanity light, that’s licensed electrical work, and no fixture swap is worth a shock risk. Our technicians have up to 22 years of experience and we pull permits where Denton requires them. For anything past a cartridge swap, call (844) 651-3175 for a free estimate.
FAQs

How long does a Boxabl bathroom remodel last? A properly installed remodel with quality fixtures will last 15 to 20 years in Denton’s climate – the main variables are the shower waterproofing and the quality of the valve and top you choose. The factory assembly that came with the unit typically holds up 8 to 12 years before the failure signs above show up. Call (844) 651-3175 for a quote on a remodel sized to your unit.
Can the failing part be repaired instead of replaced? Sometimes. A stiff shower valve is a cartridge swap, and a chipped vanity edge can be re-topped without tearing out the whole vanity. But a flexing shower pan or a compromised membrane usually can’t be repaired reliably – the fix is a new pan and waterproofing. We’ll tell you honestly which side you’re on before quoting.
How long does the swap take? A vanity and shower valve swap is a one-day job. A full bathroom remodel is typically 5 to 10 working days depending on tile and fixture lead times. We give you the schedule in writing with the price. Call (844) 651-3175 to get your dates.
How do you source the part? We match the part to your unit’s production series using the data plate and rough-in measurements, then order from a documented roster of manufacturers with published specs and warranties – Kohler, Moen, and others. We don’t carry stock on a truck and we don’t guess at fit. The part is ordered for your unit, and the manufacturer spec sheet comes with the quote.
Call (844) 651-3175 to schedule your free estimate. A live person answers 24/7, and you’ll have a written price before any work starts.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












