A Bradford company - serving Denton, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
James Hardie · Denton

James Hardie Kitchen Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Kitchen Remodeling: The Denton Owner’s Guide

James Hardie kitchen remodeling in Denton typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and whether the scope touches plumbing or electrical rough-in. We handle the full scope: tear-out, substrate and moisture detailing, cabinetry, surfaces, and finish, using a documented brand roster that includes KraftMaid, Cambria, and Silestone alongside James Hardie products where they belong. The “part” most Denton homeowners are actually chasing isn’t a kitchen component at all; it’s the James Hardie siding, trim, or panel detail nearby that’s failing and letting water into the wall behind the kitchen.

Contractors performing professional bathroom remodeling and plumbing installation in Denton, TX

Call (844) 651-3175

Owners usually discover it one of two ways. A soft spot appears under a window near the sink, or paint starts blistering on the exterior wall shared with the kitchen. Then a contractor opens the wall and finds the real cause: fiber cement that was face-nailed, unpainted at the cut edges, or butted tight against flashing with no gap. The kitchen remodel becomes a water-damage repair as much as an upgrade.

Which James Hardie Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

James Hardie is a brand of fiber cement building products, not kitchen appliances. What matters here is which Hardie line is on your home’s exterior where it meets the kitchen: HardiePlank lap siding, HardiePanel vertical siding, HardieShingle, or HardieTrim boards. Each has its own thickness and profile, and the trim and flashing details that protect a kitchen wall cavity differ across them.

To identify what you have, check three things. First, the back of a loose piece or the exposed edge often carries a stamp with the product line and thickness. Second, measure the exposed width of lap siding (common profiles run 6 to 8 inches) and the board thickness. Third, note the texture and whether it’s primed or factory-finished. James Hardie’s factory finish (ColorPlus) is a baked-on coating, and it changes which replacement pieces match.

On the OEM-versus-aftermarket question: James Hardie trim and siding pieces are best matched with genuine James Hardie product when the profile is visible, because thickness and edge detail must line up with what’s already there. For hidden substrate, sheathing, house wrap, and flashing, quality aftermarket materials are standard and appropriate. We don’t claim to stock James Hardie parts or carry them on a truck; we specify and source the right pieces per project. Bradford Remodeling Co Denton is an independent service provider and is not affiliated with James Hardie.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Kitchen Remodeling Is Failing

Fiber cement is durable, but it fails in specific, recognizable ways, and in Denton’s heat and humidity those failures show up faster than owners expect.

  • Paint blistering or peeling near the kitchen wall. Moisture is getting behind the fiber cement, usually through a failed caulk joint or a face-nailed fastener. Paint bubbles because the substrate underneath is holding water.
  • Soft or crumbly spots at the bottom edge. The siding wasn’t held above grade and is wicking groundwater. In Denton’s clay soils, splash-back at the foundation line accelerates this.
  • Gaps at inside corners and around windows. Caulk has aged out or was never installed with a proper backer gap. Water tracks straight into the wall cavity behind the kitchen.
  • Rust streaks below fasteners. Nails were driven flush or countersunk instead of leaving the required gap and being set with the correct trim nailer. The fastener head is now a leak path.
  • Visible swelling at cut edges. Edges weren’t sealed before installation. Unpainted fiber cement edges absorb water, and the board breaks down from the inside out.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A whole-home remodel with the living, dining and kitchen areas opened up

Kitchen remodels in Denton run $14,000 to $45,000 installed. A small kitchen remodel lands at $9,000 to $20,000. Cabinet installation alone is $4,000 to $13,000, countertops $2,000 to $6,500, backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000.

What drives the range: cabinet grade and layout, whether plumbing or electrical moves, countertop material, and whether exterior wall repair is part of the scope. If failing James Hardie siding is letting water in, we price the wall repair as a written line item, not a surprise. Every Bradford project gets a written price before any work starts, and you’ll see parts and labor broken out. All completed work is covered by the 365-Day Done Right Promise, a full-year written guarantee: if the work fails inside that window, we come back and correct it at no charge. A signed written guarantee is in your hand at close.

DIY or Call Us?

Some checks are safe and worth doing. You can look for cracked caulk joints, blistered paint, and soft spots at the bottom edge of the siding near your kitchen wall, and you can photograph what you find. Those observations help us scope the job.

What goes wrong with DIY: replacing fiber cement on an upper wall or around a kitchen window means cutting and fitting panels at height, resealing edges, and re-flashing correctly. Do it wrong and water keeps entering behind the kitchen. We recommend a trained professional for anything above the first floor or involving window and wall transitions. When you call (844) 651-3175, a live person answers, day or night, and we’ll tell you honestly whether you’re looking at a small repair or a larger scope.

FAQs

A second-story addition that matches the existing roofline

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeA remodeled hall bathroom with patterned floor tile and painted wallsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porch

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch