







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Denton Homeowners Choose KraftMaid Construction
Bradford Remodeling Co Denton provides independent KraftMaid construction service in Denton, TX, working with local specialists who install, repair, and reface KraftMaid cabinetry across the city’s older housing stock and new builds. We’re not a manufacturer-authorized crew, and we’re upfront about that. What sets our KraftMaid work apart is direct familiarity with real failure modes: seasonal hinge pull-out, soft-close glide failure, and the finish problems that show up in North Texas humidity. Every job gets a written price before tools come out, and every completed project carries the 365-Day Done Right Promise. Call (844) 651-3175 and a live person picks up.

Why Trust Bradford Remodeling Co Denton for Your KraftMaid Construction?

KraftMaid builds cabinets in framed and full-access lines, from the value-focused Momentum series up through Marquee and into full custom work. Each line uses different box construction, hinge mounting, and glide systems. Our technicians have up to 22 years of experience working with that range, and they know which parts are shared across lines and which aren’t.
Parts sourcing is where a lot of DIY attempts go sideways. KraftMaid replacement doors, drawer fronts, hinges, and glides are available as OEM parts when the line is current. When an older series is discontinued, we match aftermarket components to the cabinet’s actual construction rather than guessing at a universal fit. That preserves the finish match and the door alignment that makes a kitchen look square.
Warranty-safe work matters too. Improper hinge replacement or an incorrectly sized glide can stress the face frame and complicate a manufacturer claim. We work so the cabinet’s structure stays intact. As an independent provider, we handle that side of the job and explain what’s covered by KraftMaid versus what’s covered by our own written guarantee. Bradford operates under The Garrison Standard, part of the Garrison Partners family since 2004, so every price and every promise is documented before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Denton
These are the KraftMaid issues that come up most in Denton, and why they happen.
- Face-frame separation and door misalignment. North Texas humidity cycles hard between wet springs and dry summers. On painted and glazed KraftMaid finishes, that swelling and shrinking pulls the face frame out of square, so doors stop closing flush. It’s most visible on cabinets near exterior walls.
- Soft-close undermount glide failure. The glides on KraftMaid drawer boxes wear out under daily use or when a drawer gets overloaded with pots or canned goods. A drawer that stops closing fully or won’t latch usually has a worn glide, not a broken box.
- Hinge fatigue and screw pull-out. In particleboard and MDF door frames, hinge screws work loose over repeated opening and closing. Once a screw pulls out, the door sags and the alignment goes with it. A dowel and glue repair often restores it without replacing the door.
- Finish peeling or blistering near sinks and cooktops. Moisture from a sink or steam from a cooktop can get behind a poorly sealed finish and lift it. The fix is resealing and, on older installs, checking whether the original seal at install was the problem.
- Out-of-square cabinet boxes from a slab that moves. Denton’s expansive blackland clay shifts with the seasons, and pier-and-beam foundations near the Courthouse Square are especially prone to it. Cabinet boxes that rack out of square follow sloping floors, and no hinge adjustment fixes a floor that’s still moving.
A common KraftMaid issue in Denton looks like this: a homeowner notices the cabinet doors in a Momentum or Marquee kitchen no longer close flush, with one corner sagging. The usual cause is hinge screws pulling out of the particleboard frame after years of humidity cycling, or a failed soft-close glide. A qualified local pro typically removes the door, fills the screw holes with wood glue and dowels, re-drills, and either re-hangs the original door or replaces the hinge with an exact-match OEM part. If the box is sound, that restores alignment without a full cabinet replacement.
KraftMaid Parts & Our Repair-vs-Replace Approach

OEM KraftMaid parts are the first choice whenever they’re available. A replacement door or drawer front from the same series keeps the finish and the fit consistent, and OEM hinges and glides match the mounting geometry the cabinet was built for. When a series is discontinued or the lead time is too long for the job, we use high-quality aftermarket components chosen to match the cabinet’s actual construction. We don’t keep KraftMaid parts sitting in a local stockroom, so sourcing happens per job.
Repair versus replace is a judgment call, and we make it honestly. In most cases, repairing or refacing is more cost-effective than full replacement. Hinges, glides, doors, and drawer fronts are all replaceable. The line we don’t cross: if the cabinet boxes themselves are structurally compromised, refacing only hides a problem that comes back. We’ll tell you which side of that line your kitchen is on before any work is priced.
Call (844) 651-3175 to talk through what your KraftMaid cabinets are doing. Estimates are free.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We check hinge mounting, glide wear, face-frame square, and door alignment, then confirm whether the floor or foundation is contributing before we touch the cabinets.
- 2
Written price. Before any work starts, you get a written price with the scope, parts, and labor itemized. It doesn’t move once the job begins.
- 3
Repair or install. OEM parts go in where they exist, matched aftermarket where they don’t. Background-checked, uniformed technicians handle the work, and you know who’s arriving.
- 4
Test at close. Every door gets opened and closed, every drawer gets loaded and run, and we check alignment against the frame before we call it done.
- 5
Guarantee in hand. A clean site, a documented scope, and a signed 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Denton
We handle KraftMaid cabinetry across the brand’s lines: the Momentum series, the Marquee series, framed and full-access construction, and standard through custom cabinet lines. That covers door and drawer-front replacement, hinge and glide service, refacing, full cabinet installation, and kitchen island installation. We also install KraftMaid in new kitchen builds and handle countertop and backsplash work alongside it, so the cabinet, surface, and seal all match up at the end. If you’re planning around a KraftMaid order, we’ll confirm the line, the finish, and the fit before the job is priced.
We Also Service These Brands
Bradford Remodeling Co Denton isn’t tied to one brand. Alongside KraftMaid, we work with Cambria and Silestone quartz surfaces, and Kohler and Toto fixtures for kitchen and bath. That means a single written scope can cover cabinets, counters, and plumbing fixtures together, and you’re not juggling several contractors to get a finished kitchen.
FAQs – KraftMaid Construction Service in Denton

No. We’re an independent KraftMaid service provider, not a manufacturer-authorized crew, and we don’t claim to be. Our technicians work with independent local specialists who service and install KraftMaid across Denton, and every job is covered by our own written 365-Day Done Right Promise rather than by any manufacturer authorization.
Yes, OEM KraftMaid parts are our first choice for doors, drawer fronts, hinges, and glides when they’re available for your series. When a line is discontinued or the lead time is too long, we use high-quality aftermarket components matched to the cabinet’s construction, and we tell you which you’re getting before the job is priced. Call (844) 651-3175 for an exact quote – estimates are free.
Most hinge, glide, and door-alignment repairs run a single visit. Refacing and full cabinet installation are scheduled jobs that depend on part lead times and the size of the kitchen, and we give you the timeline in writing before work starts. Call (844) 651-3175 and we’ll scope it for your Denton kitchen.
We cover the KraftMaid Momentum series, the Marquee series, framed and full-access construction, and the brand’s standard and custom cabinet lines. That includes door and drawer-front replacement, hinge and glide service, refacing, cabinet installation, and kitchen island installation across Denton.
Properly executed service shouldn’t void a manufacturer warranty, though the manufacturer sets its own terms and we don’t speak for KraftMaid. We work so the cabinet’s structure stays intact, which keeps any manufacturer claim open, and our own written 365-Day Done Right Promise covers the work we do for a full year.
It depends on the scope, and here are the real ranges we work from in Denton:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every price is written before any work starts. Call (844) 651-3175 for an exact quote – estimates are free.
Book Your KraftMaid Service in Denton, TX
If your KraftMaid cabinets aren’t closing right, or you’re ready to install or reface, call Bradford Remodeling Co Denton at (844) 651-3175. A live person answers 24/7. We’ll give you a written price before any work starts and back the finished job with our 365-Day Done Right Promise. Call to schedule your free estimate today.
Written by the team at Bradford Remodeling Co Denton.












