







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Denton Homeowners Choose Therma-Tru Construction
Bradford Remodeling Co Denton provides independent construction and repair service for Therma-Tru entry doors, patio doors and sidelight systems across Denton. We work Fiber-Classic and Smooth-Star slabs, pro steel doors and glass lite systems, correcting fit and finish and repairing or replacing based on the condition of the door rather than the label on it. Our technicians have up to 22 years of experience with these systems. We’re an independent service provider, not affiliated with or authorized by Therma-Tru. Call (844) 651-3175 and a live person answers, day or night.

Why Trust Bradford Remodeling Co Denton for Your Therma-Tru Construction?

Therma-Tru doors fail in specific, predictable ways, and knowing those patterns is what separates a real fix from a patch. Our technicians have worked Fiber-Classic, Smooth-Star and pro steel doors long enough to recognize when a dragging slab is a hinge problem, when it’s a threshold problem, and when the bottom rail has taken on water and the slab itself is done. That judgment saves Denton homeowners from paying twice.
We source OEM-compatible Therma-Tru hinges, thresholds, slabs and weatherstrip so the repair holds and the door keeps behaving the way it was engineered to. When a wear item like a sweep or closer is the only issue, quality aftermarket hardware is the honest call, and we’ll say so.
Every Therma-Tru job runs under The Garrison Standard: a written price before any work starts, background-checked, uniformed technicians on every visit, and the 365-Day Done Right Promise behind the completed work. If what we fixed fails inside that year, we come back and correct it at no charge. That’s the whole arrangement, in writing, before a tool comes out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Denton
- Fiberglass slab skin cracking or blistering at the bottom rail. The Fiber-Classic slab is fiberglass over a core, and years of North Texas sun on one side and splash exposure at the bottom create a stress point right at the rail. Once the skin blisters, moisture gets behind it and the damage spreads upward.
- Flattened weatherstripping and corner seals. Heat and wind-driven rain compress the weatherstrip until it stops springing back. The door starts sticking at the strike jamb, drafts show up along the edge, and water finds the corner seals. It’s one of the most common Therma-Tru complaints we hear in Denton, and it’s fixable without replacing the door.
- Sidelight and glass lite seal failure. When the seal around an insulated glass unit gives out, moisture works in and the glass clouds. It usually starts at the edges and creeps toward the center, and no amount of cleaning clears it.
- Slab warping and hinge-side binding. Denton’s blackland-prairie clay moves with every wet spring and dry summer. On pier-and-beam homes near the Courthouse Square, that movement shows up as sloping floors and a rough opening that’s no longer square, and the door binds on the hinge side or drags on the threshold. A poorly shimmed rough opening does the same thing.
- Threshold and sill wear on patio door systems. Sliding and hinged patio doors take foot traffic and weather at the threshold until the sill wears, the door stops sealing, and water sits where it shouldn’t. Left alone, that moisture reaches the framing behind the jamb, which is the same failure path we deal with on bathroom and shower remodels in Denton’s older housing stock.
Therma-Tru Parts & Our Repair-vs-Replace Approach

The repair-or-replace decision comes down to what’s actually compromised. If the frame is square, the glass is clear and the hardware is the only thing worn, OEM Therma-Tru hinges, thresholds and weatherstrip bring the door back to spec. If the slab skin is blistered or cracked, a new OEM slab in the existing frame is usually the right call and costs far less than a full unit. When the slab skin, the frame or the glass seal is structurally gone, patching repeatedly wastes money, and we’ll tell you that plainly.
We don’t claim to keep Therma-Tru parts in local stock. Parts get sourced to the door in front of us: OEM where it matters, quality aftermarket for wear items like sweeps and closers. You get a written price on the parts and labor before anything is ordered. Call (844) 651-3175 to schedule a free estimate and we’ll put the options in writing.
| Service | Typical Denton Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the slab for skin cracks and bottom-rail moisture, test the weatherstrip and corner seals, look for fogged lites, and check the rough opening for square. On pier-and-beam homes near the Square, we look at the floor slope too, since a shifting foundation changes how the door sits in the frame.
- 2
Repair or install. We reset hinges, replace the threshold and weatherstrip, and swap in an OEM slab when the existing frame is sound. New installations get flashed and sealed to shed water away from the jamb, because in Denton’s climate that’s what decides how long the door lasts.
- 3
Test. We open and close the door through its full swing, check the latch and strike alignment, and confirm the seal closes tight with no daylight at the jamb.
- 4
Warranty. You get the completed scope and the 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Denton
We work the full Therma-Tru door lineup: Fiber-Classic Collection fiberglass entry doors, Smooth-Star Collection smooth fiberglass doors, pro steel entry doors, and Therma-Tru patio and sidelight door systems. That includes slab replacement, hinge and threshold work, weatherstrip and corner seal replacement, and glass lite service. We handle both simple repairs and full entry and patio door replacement, and we install to manufacturer specifications so the door performs the way it was built to. Whether you own a Therma-Tru door in a 1920s home near the Square or a newer duplex near UNT, we service what’s on the frame.
We Also Service These Brands
Therma-Tru is one brand in a documented roster. Bradford Remodeling Co Denton also installs and services KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, alongside brands like Wellborn, Moen and James Hardie. That range means your door, your kitchen and your bathroom can come from one contractor held to the same written standard.
FAQs – Therma-Tru Construction Service in Denton

Is Bradford Remodeling Co Denton authorized by Therma-Tru? No. We’re an independent Therma-Tru service provider, not affiliated with or authorized by the manufacturer. We work the products to spec and source OEM-compatible parts, and our work is backed by our own 365-Day Done Right Promise.
Do you use genuine Therma-Tru/OEM parts? Yes, for anything that affects fit and seal: OEM Therma-Tru slabs, hinges, thresholds and weatherstrip wherever the frame and glass are sound. Quality aftermarket hardware is used only for wear items like sweeps and closers, and we’ll tell you which is which before you approve the price.
How long does Therma-Tru service take? Weatherstrip, hinge and threshold work is usually a half-day job. A slab replacement in an existing frame typically takes a day. Full entry or patio door replacement runs longer once flashing and sealing are done right. Call (844) 651-3175 for a free estimate and a written timeline.
What Therma-Tru models/series do you cover? Fiber-Classic Collection, Smooth-Star Collection, pro steel entry doors, and Therma-Tru patio and sidelight door systems. If you’re not sure which you have, we’ll identify it during the free estimate.
Will service void my Therma-Tru warranty? Warranty-safe work means using the right parts and installing to manufacturer specification. We do exactly that. We can’t speak for Therma-Tru’s coverage decisions, but we keep our work traceable and document what was done, and our 365-Day Done Right Promise covers the repair itself.
How much does Therma-Tru construction cost in Denton? Weatherstrip, hinge and threshold repairs typically land in the low hundreds. Slab replacement in an existing frame runs higher than repair but well below full door replacement. Full entry door replacement is priced against Window Replacement at $4,500 – $15,000. Every job gets a written price before work starts, with no numbers that move at the door. Call (844) 651-3175 for an exact quote – estimates are free.
Can a Therma-Tru Fiber-Classic door slab be replaced without replacing the whole frame? Usually yes. If the frame is square and the glass is clear, a new OEM slab slides into the existing frame and saves you the cost of a full unit.
Why does my Therma-Tru door stick and show daylight at the strike jamb? Daylight at the strike jamb almost always means flattened weatherstripping or a shifted hinge, and on Denton’s pier-and-beam homes a settled rough opening adds to it. We reset the hinge, replace the weatherstrip and confirm the strike aligns.
Is cloudy glass in a Therma-Tru sidelight or door lite repairable? Cloudy insulated glass is a failed seal, and cleaning won’t fix it. The glass unit gets replaced. The frame usually stays.
How do I know whether to repair or replace a Therma-Tru entry door? Repair makes sense when the frame, slab skin and glass seal are sound. Replace when the skin is blistered or the seal is gone. We give you a written comparison before you decide.
Does a Therma-Tru door need different flashing and sealing in Denton’s climate? Yes. Denton’s clay soils shift with wet springs and dry summers, and hail and wind do the rest. The flashing and seal have to shed water away from the jamb, not just sit over it. Call (844) 651-3175 and we’ll walk you through it.
Book Your Therma-Tru Service in Denton, TX
Door dragging, sticking or fogged? Bradford Remodeling Co Denton will give you a written price before any work starts, background-checked, uniformed technicians on the job, and the 365-Day Done Right Promise behind the work. Call (844) 651-3175 for a free estimate.
Written by the team at Bradford Remodeling Co Denton.












