







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Grapevine, TX
We provide independent PGT service across Grapevine, from Vinylmax glass swaps to WinGuard impact replacement and the roof work that storm season makes necessary. We are not affiliated with, authorized by, or sponsored by PGT; our familiarity comes from volume, not a manufacturer badge. What makes our PGT work different here is that we read the building before we read the brand: a downtown bungalow under the historic overlay and a 1990s brick-veneer tract home a few blocks away need two different answers. Call (844) 651-3175 for a free written estimate.

Why Grapevine Residents Choose Us for PGT Service

PGT products are everywhere in Grapevine. The Vinylmax single-hung and double-hung units in the 1980s and 1990s subdivisions, the WinGuard impact glass going into newer custom builds near the lake, the aluminum sliders on homes that face wind-driven rain. We’ve worked on all of it, and we know the model lines well enough to tell you whether the sash is worth saving or the whole unit has run its course.
That matters because the honest answer on a PGT window isn’t always replacement. On current-series units, OEM PGT sashes, insulated glass units, weatherstripping and hardware are the right call for match and warranty integrity. On older Vinylmax windows where OEM parts are discontinued, quality aftermarket glass and rollers are a reasonable path. We quote repair versus replacement based on frame condition, not on the calendar. Our technicians have up to 22 years of experience, every price is written before work starts, and our PGT service covers glazing, hardware, and the roof and exterior work that North Texas weather puts on the same punch list.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Solve in Grapevine
- Failed insulated glass units fogging or hazing. The seal on a 15-to-25-year-old Vinylmax IGU gives out after two decades of North Texas heat cycling, and you get that milky haze between the panes. The glass is done; the frame often isn’t. This is the most common call we get in Grapevine tract homes built between the late 1980s and early 2000s.
- Hail-pitted and cracked vinyl sashes and frames. Hail events batter PGT vinyl units across Grapevine, and a cracked glazing bead is the quiet problem. It lets water into the frame instead of shedding it, and the damage shows up months later as rot or a soft sill.
- Binding or corroding aluminum slider tracks and rollers. Lake-corridor homes in Grapevine take humidity and wind-driven rain that inland subdivisions don’t. PGT Aluminum Series and WinGuard Aluminum tracks collect grit and corrode, and a slider that drags is usually a roller and track problem, not a door problem.
- Racked frames and hard operation on black-clay soil. Grapevine’s black-clay soils shrink and swell hard between wet springs and dry summers. When the slab moves, the rough opening moves with it, and a vinyl sash that was square at install goes out of plumb. You get sticking windows and air or water infiltration at the frame.
- Storm-driven roof and exterior damage on the same homes. Hail and high wind don’t stop at the window line. We handle the roof repair side too, which matters when a Grapevine homeowner is filing one claim for windows and shingles together.
PGT Service in Grapevine: What Local Conditions Mean for Your Equipment

Grapevine’s historic overlay around Main Street changes what a window replacement even is. On the downtown bungalows in the heritage core, an exterior change often requires design review approval before a permit issues. That means the unit has to match approved profile dimensions and sight lines, and you can’t simply swap in a modern vinyl sash because it’s in stock. A few blocks away, on a post-tension slab in a 1990s subdivision, that same call is a straight IGU swap with no design review at all.
This is the split that defines PGT work in Grapevine. Design review approval is a schedule item, not a formality, and we build it into the timeline before we order glass. The other half of the equation is what’s underneath: the heritage-core bungalows typically sit on century-old pier-and-beam foundations, while the newer subdivisions ride black-clay slabs that move with the seasons. Same brand, same town, two completely different jobs.
PGT Models & Products We Service in Grapevine
We work on the PGT lines that actually show up in Grapevine homes: Vinylmax single-hung and double-hung builder units, WinGuard impact-resistant vinyl windows and sliding glass doors, the Aluminum Series including WinGuard Aluminum sliders and fixed windows, and SolarMax and insulated Low-E glazed vinyl units.
Parts sourcing follows the same logic as the repair decision. On current-series units we specify OEM PGT sashes, IGUs, weatherstripping and hardware so the match holds. On discontinued Vinylmax units we source quality aftermarket glass and rollers from suppliers who publish their specs. We don’t claim to stock PGT parts locally; every part is ordered to the measured unit, and lead time is quoted in writing before you commit.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Grapevine

Here are the ranges we work from in Grapevine. Your written estimate is built from a measured opening, the glazing spec, and whether design review applies.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
What drives cost up: WinGuard impact glazing over standard Low-E, aluminum over vinyl, non-standard opening sizes, and pier-and-beam framing correction before a new unit goes in. What keeps it down: reusing a sound frame with an IGU swap instead of tearing out the whole window. A free estimate includes the on-site measure, a check that the opening is still square, a line-item written price, and a straight recommendation on repair versus replace. Call (844) 651-3175 to schedule it.
Serving Grapevine, TX – Our Local Coverage Area
We serve Grapevine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Grapevine
Can I put standard PGT vinyl windows in a downtown Grapevine historic bungalow? Not without checking the overlay first. Properties inside Grapevine’s historic overlay around Main Street typically need design review approval before a permit issues, and the approved profile may rule out a stock modern vinyl unit. We measure, confirm what the overlay allows, and write the spec to match before anything is ordered.
Why do my PGT windows fog up in Grapevine? The insulated glass unit’s perimeter seal has failed. On Vinylmax windows installed in the 1990s and early 2000s, that’s a normal end of service life for the IGU after two decades of North Texas heat cycling. The frame is usually still sound, so the fix is a measured IGU or sash replacement and fresh glazing bead. Call (844) 651-3175 for a free measure.
Does Grapevine hail damage PGT vinyl windows? Yes, and the visible damage is only part of it. Hail pits and cracks vinyl sashes and frames, and a cracked glazing bead lets water into the frame where the harm happens out of sight. We inspect the beads and the sill, not just the glass. Estimates are free.
Are PGT WinGuard impact windows worth it near Grapevine Lake? Often, yes. The lake corridor sees wind-driven rain and hail that inland subdivisions don’t, and WinGuard impact glazing is built for that exposure. Worth is a decision about exposure and budget, not a sales pitch; we’ll show you the line-item cost difference in writing so you can decide. Call (844) 651-3175.
My PGT sliding door sticks – is that the door or the house? Check the house first. On Grapevine’s black-clay soils, slab movement racks the rough opening, and an out-of-square frame makes a sound slider drag. If the opening is square and the track is clean, the problem is worn or corroded rollers and that’s a parts job. We verify the opening before quoting.
Service Areas Near Grapevine
Our Grapevine service area covers ZIP codes 76099 and 76051, and we work the surrounding towns the same way, including Coppell and Lewisville to the east, plus Denton, Corinth, Lantana, Highland Village, Providence Village and Paloma Creek South.
Book Your PGT Service in Grapevine Today
In Grapevine’s older brick-veneer subdivisions, a typical PGT call is a fogged double-pane Vinylmax window where the seal has failed after 20-plus years. We check whether the frame and sash are sound, confirm the opening is still square, and quote the honest fix in writing. A live person answers the phone around the clock. Call (844) 651-3175 for your free estimate.
Written by the team at Bradford Remodeling Co Denton.












