







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Frisco, TX
We provide independent Mr-Glass service across Frisco, and the single thing that makes our work here different is this: we troubleshoot the glass and hardware that another crew already installed. Because Mr-Glass systems are specified by family rather than by service contract, we’re often the only party who will come back to a leaking or out-of-plumb unit instead of telling you to call someone else. Our technicians have up to 22 years of experience hanging frameless enclosures, sliders, and glass wall systems. To schedule a free estimate, call (844) 651-3175. Every price is written down before any work starts, and every finished project carries our 365-Day Done Right Promise.

Why Frisco Residents Choose Us for Mr-Glass Service

We know Mr-Glass enclosures at the level of hinges, pivots, sweeps, and channel, not just “shower door.” That matters in Frisco, where most of the housing went up fast and the glass went in against walls that weren’t always square. An independent trade partner brings something a factory dealer can’t: neutral advice. We don’t have a product line to push, so if the right answer is re-hanging your existing panel with new hardware, that’s what we’ll quote.
We also work with a documented roster of name-brand materials throughout our remodeling work, so a bathroom remodel that includes a new glass system is specified in writing with traceable manufacturers behind it. See the full picture of our Mr-Glass service for how we approach enclosures and glass systems across the region. Calls get answered by a live person, day or night, not a voicemail queue. We keep our work focused on this stretch of Denton County through our Frisco service area.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Frisco
These are the failures we see most often on Frisco glass work, and each one traces to something specific about how the homes here were built or how the climate treats them.
- Hinges and pivots loosening on frameless doors. In builder-grade Frisco subdivisions, stud walls were framed fast, and a glass panel set against a wall that isn’t plumb puts constant load on the hinge. The door sags, the closing edge gaps, and the fix is re-setting the wall channel rather than tightening screws over and over.
- Hard-water spotting and mineral etching. North Texas water is hard, and it shows fast on large clear-glass shower panels that were never given a protective coating. Left alone, the minerals etch the surface itself, and no amount of polishing brings the clarity back.
- Silicone and sweep gasket failure at the curb. Frisco summers push glass and framing through repeated expansion and contraction. After a few seasons, the sweep and the wall channel let go and water starts wicking behind the enclosure into the wall. That’s a repair you want early.
- Chipped or spalled edges at template-cut notches. This is a sequencing problem, not a product defect. When the opening was measured before tile and backer were final, the glass gets cut to a dimension the finished wall no longer matches.
- Out-of-level curb and door tracking. On homes from the 1990s through the 2020s, the shower pan itself is sometimes a hair out of level, so the sweep meets the tile instead of the glass edge and the door tracks water toward the wrong corner.
Mr-Glass Service in Frisco: What Local Conditions Mean for Your Equipment
In Frisco‘s master-planned communities like Stonebriar and Starwood, the HOA architectural review committee can reject a change that passes city code, and that review reaches interior-altering projects too. Change a window or a wall opening to take a new glass system, and the committee can hold the approval longer than the build itself takes. We plan for that on Frisco jobs. Finish selections get locked early, and the glass is templated only after the tile, backer, and wall opening are final, so a committee delay never turns into a re-cut panel. Several homes also sit on post-tension slabs, and clay soil movement near that kind of foundation is a real reason to re-measure a finished opening rather than trust the number from a rough-phase sketch.
Mr-Glass Models & Products We Service in Frisco
We handle the Mr-Glass families that show up in Frisco homes: framed and frameless shower enclosures in barn-door and pivot styles, custom mirror and glass wall systems for bathroom vanities, semi-frameless sliding tub/shower doors, and interior glass partition and office-front systems for the home-office conversions that are common in these subdivisions.
On parts, we use OEM Mr-Glass hinges, pivots, sweeps, and channel where the existing system is still supported, and we match thickness and temper to the original spec. We don’t claim to stock parts locally. If something is discontinued, a quality aftermarket hinge or sweep of equal glass thickness is a sound repair, not a reason to replace the whole enclosure. If the glass itself is chipped, etched beyond polishing, or drilled for a hinge pattern that no longer matches available hardware, replacing the panel is the honest answer.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Frisco

Here’s what this work runs in Frisco. These are real ranges, not “call for a quote.” Cost moves with glass thickness, the number of panels, whether hardware is OEM or aftermarket, and how much wall prep the finished opening needs.
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure (walk-in shower installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel (full, includes glass and tile) | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate includes a re-measure of the finished opening, a look at the wall for plumb, and a written line-item price before work begins. That price doesn’t move once the job starts. Call (844) 651-3175 for an exact quote.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Frisco
No. Bradford Remodeling Co Denton is an independent Mr-Glass service provider, not manufacturer-affiliated or authorized, and that’s deliberate. It means our advice on glass, framing, and hardware stays neutral. Call (844) 651-3175 with questions about your unit.
OEM where the existing Mr-Glass system is still supported, matched to the original glass thickness and temper. When a part is discontinued, a quality aftermarket hinge or sweep of equal thickness is a sound repair rather than replacing the whole enclosure. Call (844) 651-3175 to talk through yours.
A shower enclosure re-hang or hardware replacement is typically a short job, while a full enclosure installation or bathroom remodel runs longer and depends on template and glass lead time, plus tile cure before templating. We schedule around HOA review where it applies and confirm timing in writing.
Framed and frameless shower enclosures in barn-door and pivot styles, semi-frameless sliding tub/shower doors, custom mirror and glass wall systems for vanities, and interior glass partition and office-front systems. If you’re unsure which family you have, call (844) 651-3175.
Frisco’s hot summers drive the expansion and contraction that works silicone and sweep gaskets loose at the curb and wall channel, and spring hail and high wind are hard on any exterior glazing. Interior shower glass mostly suffers from hard water and heat cycling rather than hail. For a panel that’s failed, call (844) 651-3175 for a free estimate.
Service Areas Near Frisco
We also take Mr-Glass work in Prosper and The Colony, plus Denton, Corinth, Lantana, Highland Village, Providence Village, and Paloma Creek South. Tell us where you are in the 75034, 75035, or 75033 ZIPs and we’ll confirm coverage.
Book Your Mr-Glass Service in Frisco Today
If your enclosure is leaking, sagging, or etched, or you’re planning a new frameless system in Frisco, call (844) 651-3175 for a free estimate. We’ll re-measure the finished opening, put the price in writing, and stand behind the work for a full year under our 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Denton.












