







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Denton Owner’s Guide
We install Wellborn-compatible bathroom cabinetry and full bathroom remodels in Denton, typically in the $9,000 – $28,000 range for a complete gut-and-rebuild, with smaller scopes landing between $5,000 and $12,000. Every project gets a written price before a single tool comes out, and it doesn’t move at the door.

Most Wellborn owners don’t call us about a “part.” They call because a vanity drawer slides crooked, a door hinge has torn loose from the face frame, or the cabinet box has begun to swell under the sink. What started as a five-dollar hinge or a soft-close slide has now stressed the wood around it, and in a Denton bathroom that runs humid eight months of the year, that damage spreads. The reader who lands here usually has a failing component and a finished look they want to keep, not a whole new bathroom.
Bradford Remodeling Co Denton is an independent remodeling contractor. We’re not affiliated with Wellborn, but Wellborn is one of the documented brands in our material roster, alongside KraftMaid, Cambria and Silestone.
Key Takeaways
- Wellborn bath cabinetry failures are usually hinge, glide or substrate problems, not the door or drawer face itself.
- Full bathroom remodels in Denton run $9,000 – $28,000; small baths $5,000 – $12,000. Written price before work starts.
- Soft-close hinges and drawer glides are the first things to fail in a North Texas bathroom, not the cabinet box.
- Every job we complete carries the 365-Day Done Right Promise.
Which Wellborn Models This Applies To

Wellborn builds across several lines, and the part you need depends on which one is in your bathroom. Their semi-custom lines include the Wheat and Ridge series, while the full-access and framed cabinet constructions each use different hinge styles and mounting patterns. If your home was built or remodeled in the last decade and a half in a Denton development, there’s a good chance you have a Wellborn vanity under the sink. Before you order anything, look for the manufacturer label on the inside of the cabinet door or the back of the drawer box: that label carries the series name, the door style, and the finish code. If it’s gone, measure the door overlay (the amount the door sits past the opening) and the drawer box dimensions. Those two numbers, plus the cabinet series, are what a supplier needs to match a replacement part correctly.
On the OEM-versus-aftermarket question: Wellborn sells through dealers, and a factory hinge or glide will match the original. For a hinge that’s failed, a quality aftermarket soft-close hinge from a documented brand often fits the same bore pattern and costs less, and it’s what we install when the original part number is discontinued. What we don’t do is guess: we confirm the overlay and mounting pattern before anything is ordered, so the replacement sits flush.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Bathroom Remodeling Is Failing
- The door sags or won’t stay closed. The hinge screws have stripped out of the face frame, usually because the wood softened from steam. Re-tightening won’t hold for long; the screw holes need a proper repair or a new hinge with a wider plate.
- The soft-close drawer glides out on its own, or the drawer hangs. The glide’s dampener or the slide mechanism has worn. In a humid Denton bathroom, the glide loses its tension faster than in a dry climate.
- The wood under the sink is swollen or soft. Water from a slow cabinet-base leak has soaked the substrate. This is the one that surprises owners: a $12 failed supply line can ruin a $400 cabinet base in a humid season.
- The finish is peeling or blistered at the bottom corners. That’s moisture wicking into the substrate and lifting the finish. On painted or thermofoil doors, once it’s blistering, the finish is done.
- The cabinet box has pulled away from the wall or the toe kick. Settled framing or a failed fastener behind the cabinet. This one we don’t call a “part failure” so much as an installation stress, and it’s worth a look before you replace the cabinet.
Each of these has a fix short of a full replacement. That’s the whole point of this page: match the part, fix the cause, and keep the cabinet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Wellborn bath work runs in Denton, with the price ranges we actually quote:
| Scope | Typical installed price in Denton |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Full bathroom remodel | $9,000 – $28,000 |
What moves the number: whether the cabinet box is salvageable (a hinge or door swap is at the low end; a failed substrate is a new vanity), the door style and finish, whether the rough-in or plumbing needs to move, and tile scope. The written price itemizes parts and labor separately, so you can see exactly what a Wellborn-matched door or glide costs versus the installation. That written price is non-negotiable, and any job we complete carries the 365-Day Done Right Promise: if the work fails inside that window, we return and correct it at no charge.
DIY or Call Us?
A few things an owner can safely handle: checking the cabinet label, tightening a hinge screw that’s still biting into solid wood, and cleaning and drying a damp cabinet base. If the screw is spinning in stripped, soft wood, or the face frame has swelled, stop. Driving a longer screw into wet substrate makes it worse, and re-gluing a damp box just hides the leak that’s still running. Beyond that, the fix belongs to someone who can match the part to the series and correct the cause.
We install and repair to the trade standard, our technicians are background-checked and uniformed, and a live person answers the phone at any hour. Call (844) 651-3175 for a free estimate, with a written price in your hand before any work begins.
FAQs

A well-installed Wellborn vanity should hold its hinges and finish 15 to 20 years. In a Denton bathroom, with our long humid stretch from spring through fall, the parts that fail first are soft-close glides and the wood under the sink, usually within 8 to 12 years. Call (844) 651-3175 and we’ll tell you whether it’s a part fix or a replacement.
Often, yes. A stripped hinge screw can be repaired with the right insert, and a failed soft-close glide or hinge swaps without touching the door or drawer face. If the substrate itself is soft, a replacement is the honest answer. We diagnose before we recommend. Call for a free estimate.
A hinge or glide swap is a same-day job, usually a couple of hours. A door or drawer face replacement depends on the finish lead time. A full vanity replacement or bathroom remodel is scheduled in writing before we start. Call (844) 651-3175 to schedule your free estimate.
We match the series, door style and overlay from your cabinet label or measurements, then order through the documented supplier network we work with, which is how we keep specifications traceable. We don’t carry parts on a truck and we don’t stock Wellborn. Call for a free estimate and a written price.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












