A Bradford company - serving Denton, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Silestone · Denton

Silestone Home Additions & ADU in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A garage converted into a guest room and home office
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Silestone Home Additions & ADU: The Denton Owner’s Guide

An addition or ADU built around Silestone surfaces in Denton typically runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached ADU, and it is planned work – scheduled, permitted, and built over weeks, never same-day. The failure usually shows up small. A quartz seam in a new bath or kitchenette opens after a season of North Texas clay movement, or a panel edge lifts because the substrate wasn’t leveled before the slab went down. By the time a homeowner calls us, they’re usually standing in a finished room looking at a hairline crack that wasn’t there at the walkthrough.

Contractor using a level to install a new residential door frame in Denton, TX

Call (844) 651-3175

Which Silestone Models This Applies To

Silestone is a brand of engineered quartz, so the “model” that matters for an addition is the slab line and finish, not a serial number on a machine. The collections most Denton homeowners spec into additions and ADUs are the standard jumbo slabs in the 2 cm and 3 cm thicknesses – 3 cm for a kitchenette countertop or a bar top, 2 cm when the design calls for a thinner profile over a vanity or built-in. Identifying the right material for a repair or match starts with the original invoice or fabricator sticker under the counter, plus a physical measurement: slab thickness in centimeters, edge profile, and the color name stamped on the paperwork. Matching an older installation to current stock is where surprises live, because dye lots and finish names shift over the years. The OEM-versus-aftermarket decision here is real: going back to the original Silestone color keeps the surface uniform, while a substitute quartz from another line will read as a mismatch the moment sunlight hits both.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Silestone Home Additions & ADU Is Failing

Quartz doesn’t rot or warp the way wood does, but it telegraphs the problems underneath it. Here’s what we see on Denton additions and what each symptom usually means:

  • A hairline crack along a seam. The adhesive joint failed, often because the two slab sections settled at different rates over a pier-and-beam or slab-on-grade floor that moved. Denton’s expansive clay soil is the usual culprit, and a crack at the seam is the floor, not the stone, telling you something.
  • A panel edge lifting or feeling uneven. The substrate under the quartz wasn’t flat or wasn’t fastened correctly before install. Quartz is rigid, so any hollow spot beneath it becomes a stressed spot you can feel when you press on the edge.
  • Chipping at a sink or cooktop cutout. The fabricator’s cutout was cut too tight, or the edge wasn’t polished and supported properly. These show up months after move-in, once thermal cycling in a Texas kitchen works the weak point.
  • Discoloration or a ring that won’t scrub out. Quartz is non-porous, so staining on the surface usually means a coating or sealer that shouldn’t be there, or heat damage from a pan set down hot. Dark marks that follow a pattern point to a real surface issue, not dirt.
  • A gap where the quartz meets the wall or backsplash. The cabinet run or the wall shifted after install. The quartz didn’t move; what’s holding it did, and that’s a framing or leveling question before it’s a countertop one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers leveling a new base cabinet during a kitchen remodel

For a Silestone surface tied to an addition or ADU in Denton, here’s how the numbers fall. These are real installed ranges, not a “call for a quote” runaround:

  • Countertop installation (Silestone or comparable quartz): $2,000 – $6,500
  • Kitchen island installation: $3,000 – $10,000
  • Backsplash installation: $800 – $2,500
  • Full home addition (Silestone surfaces included in scope): $45,000 – $130,000
  • ADU construction: $90,000 – $220,000
  • Garage conversion to living space: $30,000 – $80,000

What moves the range: slab thickness and color line, edge profile, whether the substrate needs correction before the new surface goes down, and the cutout count for sinks and cooktops. Every Bradford Remodeling Co Denton project gets a written, line-item price before any work starts – no numbers that move at the door – and the work carries the 365-Day Done Right Promise, a full-year written guarantee. If the install fails inside that window, we come back and correct it at no charge.

DIY or Call Us?

You can safely check the basics yourself: measure the slab thickness, photograph the seam or edge, find the original invoice or fabricator label, and note whether the gap or crack is growing. What you shouldn’t do is try to lift, re-adhere, or re-cut a quartz panel. Quartz slabs are heavy and unforgiving, the cutouts are already stress points, and a dropped or mis-set slab can crack, injure a hand or back, and take the cabinet run with it. This is finish work that depends on a flat, properly fastened substrate underneath – the part you can’t see is the part that decides whether the surface lasts. That’s where we come in. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed so you know exactly who’s walking through your door. Call (844) 651-3175 for a free estimate – a live person answers, 24/7.

FAQs

A wide opening with a new beam where the kitchen wall was removed

How long does Silestone last in a Denton addition? Engineered quartz is a long-lived surface, and most installations hold for well over a decade when the substrate is right and the seams are done properly. The realistic failure point in Denton isn’t the stone – it’s the clay soil movement and the framing underneath it. Get the base right and the surface follows.

Can a failing Silestone seam or edge be repaired instead of replaced? Often, yes. A failed seam can be re-adhered and refinished, and a chipped cutout edge can sometimes be polished out by a fabricator. Whether repair holds depends on what caused it – a seam that failed because the floor is moving will fail again unless the floor is addressed. We give you the honest call, in writing, before touching it. Call (844) 651-3175 for a free estimate.

How long does a Silestone surface swap take in a Denton addition? A countertop or island re-surface is typically a several-day job once the material is on site, and a full addition or ADU is a weeks-long build scheduled around permits and inspections. Nobody installs a Silestone-topped addition or ADU in a day, and any contractor who says so is telling you something about how they work. We schedule it properly and give you the written scope and timeline up front.

How do you source the Silestone for my project? Through documented, name-brand material channels – Silestone sits on our approved brand roster alongside Cambria and Caesarstone, and cabinetry from KraftMaid and Wellborn, fixtures from Kohler, all with manufacturer specs and warranties behind them. Because we work from a documented roster, your specification is traceable instead of left to whatever’s on hand. We don’t claim to stock parts or carry slabs on a truck – material is ordered to your project’s spec, which is how the color and thickness actually match. Call (844) 651-3175 for a free estimate.

Bradford Remodeling Co Denton is an independent service provider and is not affiliated with Silestone.

Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary suite with built-in wardrobes and a window seatA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay window

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch