A Bradford company - serving Denton, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
K
Kohler · Denton

Kohler Kitchen Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Kitchen Remodeling: The Denton Owner’s Guide

Kitchen remodeling in Denton with Kohler fixtures (faucets, sinks, pot fillers, soap dispensers) typically runs $14,000 – $45,000 installed, depending on scope and materials. Most Denton projects we price involve replacing a failed Kohler component during a larger remodel, not swapping a part in isolation. Owners usually discover the failure the same way: a slow drip under the Kohler faucet that stains the cabinet base, a pull-down spray head that won’t retract, or a sink weld that weeps at the drain collar after a decade of North Texas water. Call (844) 651-3175 for a written price before any work begins.

Contractors performing professional bathroom remodeling and plumbing installation in Denton, TX

Call (844) 651-3175

Which Kohler Models This Applies To

Kohler kitchen products span several lines: Artifex and Strive sinks (stainless), Whitehaven and Cairn (cast iron and composite apron-front), Bellera, Simplice, Graze, Cruette, and Purist faucets, plus Crue and Tournant pull-downs. Each line uses different cartridge families, spray-head thread pitches, and sink cutout dimensions. A Whitehaven 35-1/2″ apron sink needs a custom cabinet face and a specific cutout; a Strive 32″ undermount fits a standard 33″ base cabinet. Identification matters: the model number lives on a sticker under the sink rim or on the faucet body beneath the handle. Photograph it before you call anyone. Kohler OEM cartridges match the ceramic-disc tolerance of the original; a generic aftermarket cartridge may fit the threads but seize within a year. On a $14,000 – $45,000 Denton kitchen remodel, the $40 price difference between OEM and aftermarket is not where you save money.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Kitchen Remodeling Is Failing

Here’s what we hear from Denton homeowners when a Kohler kitchen component has reached the end of its service life:

  • Persistent drip from the faucet spout. The ceramic cartridge has worn or mineral scale has scored the disc. Denton’s hard water accelerates this – it’s the single most common failure we see here.
  • Handle feels stiff or grinds when turned. Scale buildup inside the valve body or a failing cartridge. Ignoring it usually means a cracked valve body next.
  • Pull-down spray head won’t retract or leaks at the hose connection. The magnetic docking magnet weakens or the hose O-ring fails. Common on Bellera and Simplice models past the 7-year mark.
  • Water pooling around the sink rim or under the cabinet. Failed plumber’s putty or a degraded silicone bead at the sink-to-countertop joint. On cast iron sinks, this can precede a rust ring at the rim.
  • Discoloration or pitting on the finish. Kohler’s Vibrant finish holds up well, but Denton’s water chemistry will dull any finish eventually. Pitting on a stainless sink signals chloride attack and usually means replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers leveling a new base cabinet during a kitchen remodel

Here’s what a Kohler kitchen component replacement runs in Denton when it’s part of a broader remodel:

Scope Installed Price Range (Denton)
Kitchen remodel (full, Kohler fixtures) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

Price drivers: sink type (cast iron vs stainless vs composite), whether the cabinet has to be modified for an apron-front, countertop material and edge profile, and whether the rough-in needs adjustment. You get a written, line-item price before any work starts – parts and labor separated, no numbers that move at the door. Every completed project is covered by the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.

DIY or Call Us?

You can safely shut off the supply valves, photograph the model sticker, and check for active leaks with a dry paper towel. That’s it. Replacing a Kohler cartridge or swapping a sink is where DIY goes sideways – a cross-threaded supply line floods a cabinet in minutes, and an improperly seated cast iron sink can crack at the rim when the first pot hits it. Bradford Remodeling Co Denton is an independent service provider, not affiliated with Kohler. Our background-checked, uniformed technicians bring up to 22 years of experience to every job and source the correct OEM part by model number. Call (844) 651-3175 – a live person answers 24/7.

FAQs

A garage converted into a guest room and home office

How long does a Kohler kitchen faucet or sink last in Denton? A Kohler faucet cartridge typically lasts 7 – 10 years in North Texas water; cast iron sinks last 25+ years with proper care. Denton’s hard water shortens cartridge life. Call (844) 651-3175 to schedule an evaluation.

Can the part be repaired instead of replaced? Often yes – a cartridge or spray-head swap fixes most faucet issues. If the valve body is cracked or the finish is pitting, replacement is the honest answer. We’ll tell you which on a free estimate.

How long does the replacement take? A faucet swap runs 1 – 2 hours; a sink replacement runs 3 – 5 hours if the countertop doesn’t need modification. We’ll give you the timeline in writing with the price.

How do you source the Kohler part? By model number from Kohler’s OEM supply chain. We don’t stock parts or carry them on a truck. Aftermarket equivalents are offered only when OEM is discontinued, and we say so upfront.

Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatA remodeled staircase with wood treads and a slim metal railingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sink

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch