







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Denton Owner’s Guide
We build Kohler-finished home additions and ADUs in Denton, and the installed range runs $45,000 to $130,000 for an addition and $90,000 to $220,000 for a full detached ADU, depending on foundation, square footage, and whether the space gets a kitchen or bath rough-in. A garage conversion sits lower, at $30,000 to $80,000. This isn’t a one-day swap, so we won’t pretend it is – but you get a written price before any work starts, and a live person answers the phone when you call.

Owners in Denton usually arrive at this page mid-struggle, not at the dreaming stage. The addition was half-built by someone who stopped showing up, or the ADU plans were drawn but the plumbing and finish work were never finished to spec. That’s where Kohler matters: the fixtures are the part of the job a homeowner can actually judge, and when the faucet, shower valve, or toilet in a new bathroom wing is installed wrong, it shows up fast. We finish and correct what’s half-done and build what hasn’t started, with the plumbing and finish work squared away.
Which Kohler Models This Applies To

Kohler isn’t one product line – it’s a family of fixture series, and matching the right one to the right room is where additions and ADUs get specific. On the bath side, Kohler’s Memoirs, Devonshire, and Archer collections share a design language but use different rough-in dimensions and trim kits, and the shower valve behind the wall has to match the trim you see in front of it. A Kohler Rite-Temp pressure-balancing valve won’t accept trim from a different series, and mixing them is the single most common failure we correct in an ADU bathroom. Identify the part by reading the label inside the toilet tank lid (Kohler stamps model and serial numbers there) or the tag on the valve body behind the trim plate – not by the finish color, which tells you nothing about what’s behind the wall.
On the kitchen side of an addition, Kohler sinks and faucets pair with the cabinets and counters around them, which is why we spec KraftMaid and Wellborn cabinetry and Cambria, Silestone, or Caesarstone surfaces alongside Kohler fixtures – each has a manufacturer spec sheet, so the tolerances are traceable instead of guessed. OEM Kohler parts cost more than aftermarket equivalents, but on an ADU where the plumbing is buried behind finished drywall, the OEM valve cartridge is the one we recommend. A cheap aftermarket cartridge that fails in eighteen months means cutting into a finished wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
- Water staining on the ceiling below the new bathroom. In a Denton ADU, this usually traces to a shower pan or supply line that was never pressure-tested before drywall went up – a rough-in problem, not a fixture problem, and it needs to be opened up and done right.
- The Kohler valve handle feels loose or won’t hold temperature. A pressure-balancing cartridge has a rubber diaphragm that hardens and fails; it’s a cartridge replacement, but only if the trim and valve are the same series.
- Mildew creeping along the base of the new walls after a wet season. Denton sits on expansive clay soil that swells and shifts with our spring rains, and an addition without a proper pier-and-beam or slab foundation plan will move – which cracks tile and opens seams around Kohler shower surrounds.
- A toilet that rocks or leaks at the base in the new space. Usually a flange set too high or too low during the addition’s plumbing rough-in, not the Kohler toilet itself.
- Fixtures that were never installed at all. On a stalled addition, we regularly find Kohler boxes sitting unopened in a garage, because the previous crew walked before the finish work. We pull the spec sheet, confirm the trim matches the rough-in, and finish the install.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full home addition in Denton, the installed price runs $45,000 to $130,000. A detached ADU runs $90,000 to $220,000, and a garage conversion $30,000 to $80,000. The range moves on foundation type, square footage, whether a kitchen or bath is included, and the level of Kohler and cabinet finish you choose. Kohler fixtures sit as a line-item in that written price, not buried in a lump sum – you see the fixture cost and the labor cost separately, and no numbers move at the door. If we’re correcting a half-finished job, we quote the corrected scope the same way.
Every completed project, whether it’s a full addition or finishing the plumbing on a stalled one, carries our 365-Day Done Right Promise: a written guarantee that if the work fails inside that year, we come back and correct it at no charge. When we close out, you have a clean site, a documented scope, and that signed guarantee in your hand.
DIY or Call Us?
You can safely do the diagnostics: read the model and serial label inside the Kohler toilet tank lid, photograph the tag behind the shower trim plate, and measure the rough opening if you’re checking whether a replacement fixture will fit. What you shouldn’t do yourself is open a finished wall to chase a leaking rough-in, re-set a shower pan, or touch anything on the supply side of the plumbing. Water behind drywall in an addition or ADU is a structural problem as much as a plumbing one, and in a Denton ADU the repair cost climbs the longer it sits wet. That’s the line where a licensed tradesperson does the work.
We’re an independent remodeling contractor, not affiliated with Kohler – we install and finish Kohler fixtures to the manufacturer’s spec, and we work from the same documented brand roster on cabinets and counters (KraftMaid, Cambria, Silestone) so every material in your addition is traceable. Call (844) 651-3175 to schedule a free estimate, and a live person picks up – every hour of the day.
FAQs

How long do Kohler fixtures last in a Texas addition? A properly installed Kohler faucet or shower valve typically lasts 10 to 15 years, but the finish and cartridge are what age first – hard North Texas water wears cartridges faster, so plan on a cartridge replacement around year 6 to 8. The fixture body rarely fails; the install is what determines the lifespan. Call (844) 651-3175 for an exact quote on finishing or correcting your install – estimates are free.
Can a failed Kohler fixture be repaired instead of replaced? Often, yes – a dripping faucet or a shower valve that won’t hold temperature is usually a cartridge swap, not a full fixture replacement, as long as the trim and valve are the same series. We check that before quoting. If the rough-in was done wrong behind the wall, the repair is bigger than the part. Call (844) 651-3175 and we’ll walk through what you’re seeing.
How long does the work take? A single fixture swap is a short job; finishing the plumbing and fixtures on a stalled ADU bathroom runs days, and a full home addition runs weeks to months on a written schedule with a documented scope. We give you the timeline in the written price before work starts, not after. Call (844) 651-3175 for a free estimate on your specific scope.
How do you source the Kohler part for my model? We read the model and serial number off the label inside the tank lid or the tag on the valve body, pull the manufacturer’s spec sheet, and order the part that matches that exact series – no guessing from the finish color. We don’t carry parts on a truck or stock them locally; we source against your model so the trim, valve, and rough-in all line up. Call (844) 651-3175 and we’ll confirm what your model needs.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












