







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Home Additions & ADU: The Denton Owner’s Guide
A Delta home addition or ADU in Denton typically costs $45,000 – $130,000 for a room addition, or $90,000 – $220,000 for a full ADU, depending on footprint, foundation, and finish level. That’s the installed number, with the written price agreed before work begins. Most Denton owners don’t discover a problem with an addition or ADU through a failed part the way they would a cabinet hinge or a fixture. They discover it through a permit that was never pulled, a slab that started showing hairline cracks through the first summer, or a “finished” addition that fails inspection because the rough-in behind the wall doesn’t meet code. Those failures come back to one root cause: work that was priced at the door and never documented on paper.

Which Delta Models This Applies To
Delta doesn’t manufacture home additions or ADUs. Delta builds fixtures, faucets, shower systems, and cabinetry hardware. If you’ve searched for “Delta home additions,” you may have a Delta product in a kitchen or bath that’s part of an addition you’re planning, or you’ve hit a mixed result. We install additions and ADUs in Denton and can spec Delta, KraftMaid, Cambria, and Silestone into the project. For the addition itself, the “model” question becomes the structural system: pier-and-beam versus slab-on-grade, dimensional lumber versus engineered framing, and whether the roofline ties into your existing structure or steps down. Those aren’t model numbers; they’re engineering decisions made from your lot survey, Denton’s setback requirements, and your existing home’s footprint. The most common compatibility gotcha we see in Denton: an addition’s roofline was framed to a pitch that doesn’t match the existing GAF or Owens Corning shingle field, so the tie-in point becomes the first leak. We match the existing roof system before we frame the first wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Home Additions & ADU Is Failing
- Hairline cracks in slab or pier-and-beam flooring. Denton sits on expansive clay soils that swell and shrink with our wet-spring, dry-summer pattern. Cracks that run consistently in one direction point to a foundation that wasn’t engineered for the movement, not a surface finish problem.
- Water stains at the roofline tie-in. Where the addition’s roof meets the original house, flashing that wasn’t stepped correctly lets water wick behind the shingles. It shows up first as a stain on the ceiling inside, three to six months after the job closes.
- Cold or hot spots along exterior walls. Insulation that wasn’t installed to the right R-value for North Texas, or a vapor barrier installed on the wrong side, shows up as temperature swings and eventually as condensation between the drywall and the exterior sheathing.
- Doors and windows that stick within the first year. A framing system that wasn’t squared to the addition’s own foundation will torque the opening as the seasons shift. If the door sticks in July and swings free in January, the frame, not the door, is the problem.
- Inspection paperwork that doesn’t match the build. If the permit was pulled for a “sunroom” but the addition has a full kitchen rough-in, or the electrical was done without a licensed trade signing off, the paper trail failed before the framing did. This is the one that scares us most in Denton, because it can hold up a future home sale.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Denton addition or ADU, those ranges hold as written:
| Project | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation type, whether you’re extending the existing roofline, and finish level on the interior. A garage conversion sits at the low end because the shell already exists; a detached ADU sits at the high end because it needs its own foundation, utilities, and roof. What’s always included, at every point in that range: the written price before the first tool comes out, permits pulled and inspections passed, and the 365-Day Done Right Promise. If the work fails inside twelve months, we come back and correct it at no charge.
DIY or Call Us?
Some things you can check yourself. Walk the perimeter of the addition and look for gaps between the foundation and the sill plate. Look in the attic at the roofline tie-in for daylight or stains. Run a level along the interior wall at floor height in several spots to see if the addition is moving. Those checks cost nothing and tell you whether a professional needs to look at it. What you shouldn’t do yourself is open a wall to inspect framing, step onto a roof to inspect flashing, or touch anything electrical or gas in the addition’s rough-in. Those are the jobs that hurt people and void inspections. A licensed Texas electrician or a trained framing carpenter belongs on those, not a homeowner with a YouTube tutorial. If your addition is showing symptoms, call (844) 651-3175 for a free estimate. We’ll put the scope and the price in writing before work begins.
FAQs

A properly built addition or ADU in Denton should last as long as the original house: 50 to 100 years with normal maintenance. The clay soils here are the main variable. A foundation engineered for movement and a roof tied to the original correctly are what determine lifespan. If your addition was built without either, expect problems inside the first five years.
Often, yes. Flashing that wasn’t stepped correctly can be corrected without tearing off the roof. A foundation that’s moving slightly can be underpinned. A framing that’s out of square can be corrected at the opening. What can’t usually be repaired is an addition built without permits; that one typically requires a full trade-inspection sequence and sometimes a rebuild of specific systems. Call (844) 651-3175 and we’ll tell you which category your project falls into before you commit to anything.
A Denton garage conversion runs 6 to 10 weeks. A full room addition runs 12 to 20 weeks. A detached ADU runs 4 to 7 months depending on utility tie-ins and inspection scheduling. Those are working ranges, not promises, and the written scope you receive will state the timeline we’re committing to.
We work with a documented roster of name-brand manufacturers: GAF and Owens Corning for roofing, James Hardie for siding, Therma-Tru for doors, KraftMaid and Wellborn for cabinetry, and Cambria and Silestone for surfaces. Every spec is traceable to a manufacturer datasheet and warranty, which is what backs our own 365-Day Done Right Promise. Bradford Remodeling Co Denton is an independent service provider; we are not affiliated with Delta, though we’re happy to work with Delta fixtures you’ve selected.
Call (844) 651-3175 for a free estimate. A live person answers, day or night. We’ll put the scope and the price in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












