







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Denton Owner’s Guide
We install Schluter-compatible driveway and paver systems in Denton, and a paver driveway here typically runs $7,000 – $18,000 installed, depending on square footage, base depth, and edge restraint. This is planned work, not emergency work, so we schedule it on a normal calendar and give you a written price before anything starts. Most Denton owners find the problem the same way: a paver edges up out of the field after a wet spring, a joint line wanders, or water starts pooling against the garage slab instead of running off. Somewhere in there the bedding layer, the edge restraint, or the drainage profile has stopped doing its job. Schluter makes the transition and waterproofing profiles that keep a paver-to-slab connection tight, and when one of those fails, water gets in and the whole joint section moves.

Which Schluter Models This Applies To

Schluter’s paver and hardscape line covers a few jobs, and knowing which one you have changes what gets replaced. The profile that bridges pavers to a concrete slab or driveway apron is different from the drainage matting or the edge restraint system. Walk your driveway and note the stamped profile lettering on the metal or PVC edge piece, if it’s visible; on the matting or drainage products, the printed roll label or the original contractor’s submittal sheet is the reliable source. Measure the reveal: a paver-to-slab transition profile is sized in specific heights (often 8mm, 10mm, 11mm, 12.5mm), and the wrong height leaves a lip you’ll feel underfoot.
On the OEM-versus-aftermarket call: for the transition profiles, an exact-height, exact-finish match matters, because a color or thickness mismatch is permanent and visible every day. For the drainage matting and base components, a quality equivalent with the same spec range performs the same, and we’ll say so plainly. We are an independent service provider and are not affiliated with Schluter, so we match the part to your actual model, not to a guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
- Paver lippage at the transition profile. A paver lifts proud of its neighbor by a quarter inch or more. The cause is usually the edge restraint letting go or the bedding layer settling unevenly after Denton’s clay soil moves with the wet-dry cycle.
- Visible joint-line drift or widening. The joint runs wide in one stretch and tight in another. That’s the base losing compaction or the profile losing its anchor points, and it only gets worse with traffic.
- Water pooling against the slab or garage threshold. Denton gets hard gully-washer rain in spring, and a failed drainage component pushes water exactly where you don’t want it. Pooling at a slab edge drives water under the pavers.
- Loose or rocking profile segments. The transition strip or edge piece flexes when you walk on it. Fasteners have pulled or the profile’s embedded leg has separated from the substrate, which spells eventual heave.
- Rust, cracked PVC, or displacement at the profile edge. The profile itself has weathered out or cracked. Once the edge piece fails, the pavers it holds start to migrate outward, and the fix gets bigger the longer you wait.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Denton, a full Schluter-compatible paver driveway install runs $7,000 – $18,000. If you’re only correcting the transition and edge section, a targeted repair usually lands in the $400 – $1,800 range depending on how many linear feet are involved. What drives the number: square footage, base depth (Denton’s expansive clay soil often needs a deeper, better-compacted base than a coastal market), edge restraint length, and whether drainage components get replaced along with the surface. A full driveway replacement, if the surface is well past saving, is $5,000 – $14,000.
Every price is written before work starts. No numbers that move at the door. The labor and the material are both itemized so you can see what the part costs versus the installation. The 365-Day Done Right Promise covers every completed project: if the work fails within a full year, we return and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: photograph the failed profile, measure the reveal height, note where water pools, and confirm which Schluter product line is installed by reading the edge stamp or the original submittal sheet. That information makes a quote faster and more accurate. What goes wrong on a DIY repair is the base under the failed profile. Pulling a transition strip and re-bedding pavers without re-compacting the base means the same failure returns after the next Denton rain. The edge restraint has to anchor into solid, compacted substrate, and pavers have to be reset to exact plane or the profile lips again.
Get this part wrong and you’re resetting pavers twice. Call us at (844) 651-3175 and we’ll give you a written price before any work starts.
FAQs

A properly installed Schluter-compatible paver driveway typically lasts 25 – 30 years with correct base and drainage. In Denton, the limiting factor is usually the soil, not the part: the clay here swells and shrinks with our wet-dry cycle, and a shallow base is what fails first. Call (844) 651-3175 for a free estimate.
Often yes. If the pavers themselves are sound and only the transition or edge profile section has failed, a targeted repair is the right call and usually lands in the $400 – $1,800 range. If the base under it has gone soft, patching the profile alone won’t hold. We’ll tell you which one you’re facing after we look at it. Call (844) 651-3175 for a free estimate.
A targeted profile and edge-section repair is generally a day or two. A full paver driveway install is typically several days, longer if the base needs to be rebuilt in Denton’s clay soil. You’ll have the exact schedule in writing before work begins. Call (844) 651-3175 for a free estimate.
We match the part to your actual installed model, order it from a supplier against the spec sheet, and don’t claim to carry Schluter parts in stock or on a truck. That means the right height, material, and finish instead of the closest thing on hand. We work alongside name-brand material rosters (KraftMaid, Cambria, and Silestone among them) on the broader remodel side, but the driveway part gets matched to spec, period. Call (844) 651-3175 for a free estimate.
If your Schluter drivewy and paver transition in Denton has failed, we’ll walk the site, tell you honestly whether it’s a patch or a rebuild, and hand you a written price before a single tool comes out. Background-checked, uniformed technicians on every job, and a live person answers the phone around the clock. Call (844) 651-3175 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












