







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Denton Owner’s Guide
Replacing a Sterling paver driveway or paver surface in Denton typically runs $7,000 – $18,000 for a full driveway install, with smaller paver patio and walkway work landing between $3,500 and $11,000. We’re an independent contractor and not affiliated with Sterling, but we install to Sterling-compatible specifications and can usually schedule a free on-site measurement within a few business days. Most Denton owners find out something has failed the same way: a paver rocks underfoot when they pull in, a joint line that was tight in spring opens to a half-inch by August, or a low corner of the drive holds water after every storm and starts growing green film. That last one is the dependable early warning in North Texas, because our shrink-swell clay soil moves more than most paver beds were designed to tolerate.

Which Sterling Models This Applies To

Sterling has sold driveway and paver systems across several product families over the years, and the parts are not interchangeable between them. The bed prep, edge restraint, and joint sand spec that works for one series will fail early on another. Before we quote anything, we measure three things: the actual paver face dimensions (Sterling pavers commonly run in the 60mm and 80mm thickness classes, and the thickness governs which base course and edge restraint you need), the joint width, and the restraint profile at the driveway apron.
The fastest way to get the right part is to find the original spec sheet or the paver manufacturer’s stamp on the underside of a loose unit. If that’s gone, we measure instead of guessing. On the OEM-versus-aftermarket question, Sterling-branded replacement pavers are worth it when you’re matching an existing field and color lot, because dye lots shift between production runs and a patch that doesn’t match will read as a patch forever. For base aggregate, joint sand, and edge restraint, a quality aftermarket equivalent performs identically and costs less. We specify polymeric joint sand rated for our summer heat cycles, and we match restraint to the actual bed depth rather than a generic kit. Every price we quote is written before work starts and held to The Garrison Standard, so the number at the door is the number on the page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Pavers rocking or settling underfoot. The base course has lost compaction or washed out. Denton’s clay soil expands when wet and shrinks when dry, and a base that wasn’t deep enough or wasn’t compacted in lifts will move with it.
- Joint sand washing out after rain. Either the joints weren’t filled fully or the sand wasn’t the stabilized or polymeric type. Once joints open, water gets under the pavers and the failure accelerates.
- Sunken or heaved sections near the apron and garage. Usually a drainage problem, not a paver problem. Water pooling at the low point of the drive is the culprit, and no amount of re-sanding fixes it.
- Efflorescence (white powdery haze) that keeps returning. Moisture trapped under the surface is pushing salts up. It can be a cosmetic nuisance or a sign the bed isn’t draining.
- Edge restraint separating or leaning. The paver edge has nothing holding it, so the field spreads outward and the joints open from the perimeter inward. This one gets worse every season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Denton, quoted as a written range before anything starts:
- Paver driveway installation: $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Concrete driveway installation (if you’re weighing options): $4,500 – $12,000
- Driveway sealing: $250 – $700
What drives the range is square footage first, then base depth and haul-off. If the old bed has to be excavated and the base rebuilt in compacted lifts, that’s real labor and it’s where the low bid usually cuts corners. Our quotes are line-item, parts and labor shown separately, and the written price doesn’t move once work begins. The installation carries the 365-Day Done Right Promise: a full written guarantee, and if the work fails inside that year, we come back and correct it at no charge. If you also need interior work on the same visit, we handle KraftMaid, Cambria, and Silestone along with the hardscape.
DIY or Call Us?
You can safely do a few things yourself: pull up one loose paver and look at what’s under it, check whether water is pooling at the low corner after a storm, and photograph the edge restraint so you know what profile you’re dealing with. That’s diagnostic work a homeowner can do without getting hurt.

Where DIY goes wrong is the rebuild. Lifting and resetting a paver by hand is one thing; rebuilding the base course in proper compacted lifts and re-setting the edge restraint so the field stays tight is another. A paver bed that’s 2 inches too shallow will look perfect in October and start heaving by the next wet spring. That’s the failure that costs twice. Call (844) 651-3175 and we’ll look at it and give you a written number.
FAQs

A properly installed paver driveway should hold 25 to 30 years or more. The catch is the base, not the paver. In Denton’s clay, a base built to depth and compacted in lifts is what earns that lifespan; a shallow base shortens it to a decade or less.
Often yes. A single settled section or a failed edge restraint can be lifted, re-based, and re-set to match the existing field. We tell you plainly when a repair will hold and when it’s a patch over a bigger problem.
A repair of one section is usually a day or two. A full paver driveway rebuild typically runs three to five working days, weather permitting, and the timeline is in the written scope before we start.
We work from the spec sheet or the manufacturer stamp on a loose paver, and we measure when those aren’t available. Then we match color lot and thickness so the repair reads as original work. Call (844) 651-3175 for a free estimate.
Related work we handle in the same visit: full kitchen and bath remodels with KraftMaid, Cambria, and Silestone. We’re an independent provider and not affiliated with Sterling, and every project runs on The Garrison Standard with a written price and the 365-Day Done Right Promise behind it.
Call (844) 651-3175 to schedule your free estimate. A live person answers, day or night, and you’ll have a written price in hand before a single paver moves.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












