







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Denton Owner’s Guide
Bradford Remodeling Co Denton builds and finishes Sterling-compatible home additions and ADUs, with installed home additions running $45,000 – $130,000 and detached or attached ADU construction running $90,000 – $220,000 in the Denton market. We work from a written, line-item scope and price before any work starts, and every finished project carries the 365-Day Done Right Promise. We’re an independent remodeling contractor and are not affiliated with Sterling. This is planned construction, not an emergency call, so we schedule a free estimate rather than promising same-day dispatch.

Denton owners usually come to this page in one of two moments. Either a Sterling system on an existing addition has started failing – doors that won’t latch square, a window that’s letting in North Texas heat, a roofline sagging over a converted garage – or they’re pricing a new addition or ADU and want it built to match Sterling-grade specifications that will still be serviceable a decade from now.
Key Takeaways
- Home additions in Denton: $45,000 – $130,000. ADUs: $90,000 – $220,000. Garage conversions: $30,000 – $80,000.
- We don’t stock parts and we don’t carry Sterling components on a truck. Every material is specified, priced, and ordered in writing for your project.
- Our technicians have up to 22 years of experience, and every project closes with a written guarantee in your hand.
- Structural, electrical, and gas work touching an addition or ADU is not a DIY job – one honest paragraph on that below.
Which Sterling Models This Applies To

“Sterling” gets used loosely by Denton homeowners, so the first job is confirming what you actually have. The identification that matters isn’t the brand name – it’s the model or series number on the unit label, plus the measured dimensions of the opening, panel, or footprint the component sits in. For additions and ADUs, that means the addition’s structural drawings, the window and door series used in the build, and the ADU’s rough-in and framing specs.
Read the data plate or label on the failing component before you shop. A window series number tells us the rough opening tolerance and the glass package originally specified. A door slab label gives the handing, thickness, and bore. Without that, you’re guessing, and guessing is how Denton additions end up with a replacement that almost fits.
On OEM versus aftermarket: genuine Sterling parts carry exact-fit tolerances and the original manufacturer warranty, and for structural or code-critical components that’s usually the right call. Quality aftermarket equivalents can match performance on trim, hardware, and cosmetic items for less, but only when the spec lines up on paper. We make that comparison in writing, side by side, so the choice is yours with the numbers in front of you. We also work with documented lines like KraftMaid, Cambria, and Silestone when an addition or ADU needs cabinetry or surfaces matched to the Sterling build.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
North Texas weather works on an addition differently than a milder climate does. Denton’s summer heat cycling and clay soil movement stress framing, seals, and foundations in ways that show up slowly. Here’s what to watch:
- Doors and windows that won’t close square. Usually a sign of differential movement in the addition’s framing or foundation, not a bad hinge. When the opening shifts, the component can’t latch the way it did on day one.
- Water staining at the roofline or ceiling of the addition. Often flashing or seal failure where the addition ties into the original house. Left alone through a Denton storm season, that becomes rot in the substrate beneath.
- Drafts or heat gain at the seams. Failed weatherstripping or a glass unit that’s lost its seal. The symptom is a hot room and a higher electric bill, and the cause is a component that’s no longer doing its job.
- Sticking doors or cracks in the ADU’s drywall. Clay soil movement is a real factor in Denton. A pattern of recurring cracks in the same place points to a structural or foundation issue that needs a trained eye before it’s patched over.
- Visible sagging or a soft spot in the ADU floor or header. This is a structural warning, not cosmetic. Stop using the area and get it assessed rather than loading it while you wait.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest installed-pricing picture for Denton. These ranges cover labor, materials, and the documentation that should always come with the job.
| Scope | Installed range (Denton) |
|---|---|
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Window replacement within an addition | $4,500 – $15,000 |
| Cabinet installation (ADU or addition) | $4,000 – $13,000 |
| Bathroom remodel (ADU) | $9,000 – $28,000 |
| Kitchen remodel (ADU) | $14,000 – $45,000 |
What drives the range: size and footprint, foundation requirements given Denton’s soil, window and door series chosen, whether the addition ties into an existing Sterling build or starts fresh, and how much mechanical rough-in is involved. Every price is written before work starts, broken into parts and labor line items, with no numbers that move at the door.
The work carries the 365-Day Done Right Promise – a written guarantee that if what we installed fails within a full year, we come back and correct it at no charge. That’s the same guarantee on every completed project, written into your scope, not promised verbally.
DIY or Call Us?
Some things you can safely check yourself on a Sterling addition or ADU. Open and close every door and window in the addition and note which ones stick. Photograph cracks with a coin or tape measure against them so you can see if they grow over a few weeks. Look for water staining at seams and under rooflines. Write down the unit labels and model numbers. That information makes any estimate faster and more accurate.
What you shouldn’t take on: anything structural, any electrical rough-in or panel work, gas line work, and any repair on a component under tension or load. A sagging header, a shifting foundation, or a failed structural tie can hurt you or make a small problem much larger. That’s not caution for its own sake – it’s where the trade knowledge actually matters. Our technicians have up to 22 years of experience with exactly these situations, and we’d rather assess it correctly than have you guess.
Call (844) 651-3175 for a free estimate. We answer live, 24/7, and we’ll give you a written price before anything starts.
FAQs

A well-built addition’s structural shell should serve 30-plus years with normal maintenance, though components like weatherstripping, seals, and exterior finishes wear faster in North Texas heat – often 8 to 15 years depending on exposure. The structural work outlasts the finish work, which is why the finish is what usually needs attention first. Call (844) 651-3175 for a free estimate on what needs replacing.
Sometimes, yes – cosmetic trim, hardware, and weatherstripping are often repairable, while structural movement, foundation issues, and failed sealed glass units usually call for replacement. The honest answer depends on what the inspection shows. We give you the repair option and the replacement option in writing with prices on both, then you decide. Call (844) 651-3175 to schedule the assessment.
Small component replacements finish in a day or two; a garage conversion typically runs several weeks, and a full addition or ADU runs months depending on scope and permitting. We give you a written timeline with your written price before work starts so the schedule is never a surprise. Call (844) 651-3175 for a free estimate and a realistic timeline for your project.
We identify the exact model and series from the unit label and your drawings, then specify the OEM part or a spec-matched aftermarket equivalent and quote both in writing with the tradeoffs spelled out. We don’t stock parts and nothing is carried on a truck – every component is ordered to your spec and documented. Call (844) 651-3175 to start with a free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












