A Bradford company - serving Denton, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower
Grohe · Denton

Grohe Bathroom Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Grohe Bathroom Remodeling: The Denton Owner’s Guide

Grohe bathroom remodeling in Denton typically runs $9,000 – $28,000 for a full bath, with small baths at $5,000 – $12,000 and tub-to-shower conversions at $3,500 – $10,000. We install Grohe shower valves, thermostatic trims, and cartridge systems, and we pair them with KraftMaid, Cambria, and Silestone finishes so the spec sheet stays consistent from rough-in to close. You’ll usually discover a Grohe part has failed when the handle turns but the water barely changes, when the shower runs cold on one side of the trim, or when a slow drip at the cartridge starts staining the tile below. Estimates are free and the price is written before any work starts.

General contractors carrying drywall panels on a residential construction site in Denton, TX

Call (844) 651-3175

Which Grohe Models This Applies To

A tile setter installing wall tile in a shower

Grohe is not one valve. The trim you see in the shower is a faceplate, and the cartridge or thermostatic element behind it is a separate part number tied to the valve body buried in the wall. Identifying the right piece starts with the valve body, not the handle. Pull the trim plate and read the stamped series on the rough-in body: Grotherm 1000, Grotherm 2000, Grotherm 3000, Rapido SmartBox, or the older 34 300 and 35 000 universal series all use different cartridges and different trim ring depths. A 2000-series cartridge will not seat in a 1000-series body, and the trim screw spacing changes with the series, which is why the wrong part sits on the shelf while the shower stays cold.

Grohe’s own OEM cartridges are the safe match when the body is stamped and legible. Quality aftermarket equivalents exist for the common 34 300, but they vary in ceramic disc tolerance and in the O-ring compound, and in a Denton bathroom that sees hard, mineral-heavy water from the local supply, the cheaper O-rings harden sooner. We recommend OEM for anything inside the wall and allow aftermarket only for surface trim and seals. Check the body stamp, photograph the cartridge collar, and match both before ordering. We are an independent service provider, not affiliated with Grohe.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Grohe Bathroom Remodeling Is Failing

  • Handle turns, temperature doesn’t move. The thermostatic cartridge has a scaled or seized piston. Denton water carries enough calcium that a cartridge sitting unused in a guest bath can lock up inside two or three seasons.
  • Water runs warm when you asked for cold. The thermostatic element has drifted or the anti-scald stop has slipped. This is a temperature-safety part, and a drifted element can send water above the set point without warning.
  • Drip from the spout with the handle off. The ceramic disc in the cartridge has worn or the seat is scored. A slow drip wastes water and eventually tracks under the tile or behind the wall.
  • Trim plate won’t sit flush or screws won’t catch. The rough-in body has shifted or the plaster guard depth is wrong, meaning the valve was set too deep or too shallow during the original install. That’s a wall-opening job, not a trim swap.
  • Low flow on one outlet only. A clogged outlet filter or a failing diverter, not the cartridge. We check the filter screen and the diverter seat before recommending a cartridge, because the cheaper fix is often the right one.

Replacement Cost & What’s Included

A finished basement family room with a media wall and wet bar

A Grohe cartridge or thermostatic element replacement in a Denton bath typically runs $180 – $420 installed for a single valve, parts and labor together, when the trim comes off cleanly and the body is sound. A full valve and trim replacement inside a tiled wall adds wall opening, substrate repair, and re-tiling, so it moves into the shower replacement range of $3,000 – $8,500. A full bathroom remodel that includes new Grohe fixtures and a shower rebuild lands in the $9,000 – $28,000 range, with walk-in showers at $4,500 – $12,000 and vanity work at $800 – $3,000.

What drives the range: whether the wall opens, whether the tile pattern can be matched, whether the rough-in body needs replacing, and whether you’re updating fixtures alongside the repair. Every price is written before work starts, with the part, labor, and any wall repair listed as separate lines. All completed work carries the 365-Day Done Right Promise: if it fails inside a full year, we return and correct it at no charge. We don’t stock parts and we don’t carry a parts inventory on a truck; the correct Grohe part is sourced and confirmed to your body stamp before we schedule the install.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely shut off the water at the fixture stops, pull the trim plate, and photograph the body stamp and cartridge collar. That’s how you confirm the model before ordering, and it costs nothing. Reading the stamp wrong and forcing a cartridge that doesn’t seat is where DIY goes wrong, because a cross-threaded cartridge can crack the valve body inside the wall and turn a $180 repair into a wall-opening job. If the handle fights you or the cartridge won’t release cleanly, stop.

On a Grohe thermostatic valve, the element controls the temperature limit. Getting the anti-scald stop wrong is a burn risk, not a cosmetic problem, and it’s the reason we hand that adjustment to a trained technician. Our technicians have up to 22 years of experience, and every one is background-checked and uniformed. A live person answers the phone 24/7. Call (844) 651-3175 to schedule your free estimate.

FAQs

A walk-in pantry with wood shelving

Contact Bradford Remodeling Co Denton

If you have a Grohe valve in a Denton bathroom that’s dripping, running cold, or stuck at one temperature, give us a call. We’ll confirm the model, give you a written price on the part and the labor before anything comes out of the wall, and back the work with the 365-Day Done Right Promise. We handle Grohe installs and repairs alongside KraftMaid, Cambria, and Silestone projects across Denton, and every crew on your job is background-checked and uniformed. Call (844) 651-3175 for a free estimate.

Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelves

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch