







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Kitchen Remodeling: The Denton Owner’s Guide
A GAF-backed kitchen remodel in Denton typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop square footage, and whether the layout moves. GAF is the roofing and exterior-products brand in that spec sheet – the kitchen work itself is KraftMaid or Wellborn cabinetry, Cambria or Silestone surfaces, Kohler or Moen fixtures – and we build to the documented spec so nothing gets left to guesswork. Most Denton owners call us when a piece of that spec fails: a cabinet door that won’t stay true after a summer of humidity swings, a countertop seam that opens, a fixture that drips under the sink. We quote it in writing before any tool comes out.

Key Takeaways
- Typical Denton kitchen remodel: $14,000 – $45,000 installed.
- Written price before work starts, every time, no change-orders at the door.
- 365-Day Done Right Promise: if the finished work fails inside a year, we return and correct it at no charge.
- Live person answers the phone around the clock.
Which GAF Models This Applies To

GAF doesn’t manufacture kitchen components. It manufactures roofing shingles, underlayments, and exterior products. When a Denton homeowner says “my GAF kitchen,” that almost always means one of two things: the remodel was specified through a GAF-contracted builder package that bundled roofing and interior work, or the roof over the kitchen is the GAF product failing and the “kitchen problem” is actually an exterior leak showing up on the ceiling.
That distinction matters before anyone quotes you. If the symptom is a water stain near a kitchen soffit or a bubble in the ceiling paint, the failing part is roofing and flashing, not cabinetry. If the symptom is a cabinet box separating from the wall or a countertop seam lifting, that’s interior – KraftMaid, Wellborn, Cambria, Silestone territory, not GAF at all.
How to identify what you actually have: check the label inside any cabinet door for the manufacturer and series (KraftMaid and Wellborn both print a model code there). For roofing, check the attic for a labeled shingle bundle wrapper or look for the GAF logo on a starter course. Measure before you call – door widths, countertop overhang, the drain spacing under the sink. The measurements are what tell us which series fits. On OEM versus equivalent, GAF shingles and James Hardie siding have no safe aftermarket substitute for warranty purposes; cabinet hardware and fixtures often do, and we’ll tell you plainly which parts need the name brand and which don’t.
Bradford Remodeling Co Denton is an independent remodeling contractor. We’re not affiliated with GAF.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Kitchen Remodeling Is Failing
In Denton, the pattern repeats: a remodel that looked tight in spring shows its first fault after the second summer of expansion and contraction. Here’s what to look for and what it usually means.
- A water stain spreading on the kitchen ceiling. Almost always a roof or flashing failure above, not a plumbing fault. GAF-spec roofing that was installed without proper drip-edge overlap will let water track under the course and show up as a slow ceiling bloom near the soffit.
- Cabinet doors that won’t stay aligned. Hinge screws pulling from the substrate, or the box itself racking as humidity swings between 30 and 90 percent across a Texas year. A door that drags in August and clears in January is telling you the box is moving.
- A countertop seam that opens or chips. Quartz and natural stone seams open when the substrate under the surface flexes. A loose cabinet box or a missing shim under a seam is the root cause; the seam is just where it shows.
- A fixture that drips or a shutoff that won’t close. Cartridge wear on Kohler or Moen faucets after years of hard Denton water is the usual culprit, and a shutoff valve that won’t fully close is a supply-line failure waiting on the next repair.
- Backsplash tile cracking or grout failing in a vertical line. Movement between the cabinet run and the wall. A straight vertical crack means the two aren’t tied together; a spiderweb crack means impact or a substrate problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Denton, as installed prices, parts and labor together:
| Scope | Installed Price |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: cabinet tier (KraftMaid versus Wellborn lines sit at different price points), countertop material and edge profile, whether plumbing or electrical has to move, and whether the substrate under a countertop has to be rebuilt. Patching a failing roof above the kitchen, if that’s the actual fault, is quoted separately against the roof-repair line.
Every price is written before work begins – a real number on paper, not a range that moves when the crew arrives. The finished work carries the 365-Day Done Right Promise: if it fails inside a year, we return and correct it at no charge. The guarantee is in your hand, signed, at close, alongside a clean site and a documented scope.
DIY or Call Us?
Some of this is safe to check. Some of it isn’t.
What you can do: open the cabinet door and read the label inside for the model code; feel along a countertop seam for a lip with your fingernail; run the faucet and watch under the sink for a drip; look at the ceiling near the kitchen for a stain. Take a photo and measure the door width. That information alone tells us which part we’re dealing with.
What you shouldn’t do: anything involving the roof, the electrical under a cabinet run, or a gas line behind a range. High-tension springs, live wiring, and gas connections are not a homeowner job. A mis-set roof course on a Denton house can let water track into a wall cavity for months before it shows, and a gas connection that isn’t properly sealed is a serious hazard. If your symptom is a ceiling stain or a gas smell, stop and call us. If it’s a cabinet hinge or a dripping faucet, that’s a straightforward fix and we’ll quote it in writing. Call (844) 651-3175 and we’ll walk through what you found.
FAQs

A properly installed cabinet run and quartz or natural stone countertop should hold twenty years or more; the parts that fail first are hinges, faucet cartridges, and caulk at the backsplash, which wear faster under Texas humidity swings. Roofing above the kitchen, if GAF shingles were used, typically runs 20 to 30 years under a standard manufacturer warranty. Call (844) 651-3175 for an exact quote – estimates are free.
Often yes. A cabinet door that’s out of alignment can be re-hung and the hinge screws reset into a solid substrate; a faucet cartridge can be swapped without replacing the fixture; a countertop seam can sometimes be re-bonded and re-polished. A ceiling stain from a roof failure is not a repair you defer – that gets fixed properly. We’ll tell you which is which before you spend anything.
A faucet cartridge or a single door re-hang is under an hour. A full cabinet run or countertop replacement is a scheduled job, typically a few days once materials are on site, and we don’t promise same-day on planned work because nobody builds a kitchen in a day. What we do give you is a written start date and a written price before work begins.
Through the manufacturer’s documented supply chain and the brand roster we work from – KraftMaid and Wellborn for cabinetry, Cambria and Silestone for surfaces, Kohler and Moen for fixtures, GAF and James Hardie for exterior products. Specifications are traceable, and the manufacturer’s warranty sits behind our own 365-Day Done Right Promise. We don’t carry parts on a truck and we don’t run a warehouse; the part is ordered to your measured spec, not guessed.
Call (844) 651-3175 to schedule your free estimate. A live person answers around the clock, and we’ll give you a written price before anything starts.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












