







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Denton Owner’s Guide
IKO makes roofing and waterproofing systems, not vanity cabinets or shower valves, so “IKO bathroom remodeling” in Denton almost always means one of two things: an IKO waterproofing membrane or roofing underlayment protecting the bathroom from moisture, or a homeowner working from an IKO product label they found behind the wall. Bradford Remodeling Co Denton handles the full bathroom as a system – substrate, waterproofing, tile, fixtures – with installed pricing that runs $9,000 – $28,000 for a full bathroom remodel in Denton. Estimates are free and scheduled within a few business days. You’ll usually discover the problem the same way every owner does: a soft spot at the tub surround, grout that won’t stay put, or a stain blooming on the ceiling of the room below.

We’re an independent contractor. We’re not affiliated with IKO, and we don’t claim to be. When an IKO membrane or underlayment is part of your spec, we install to the manufacturer’s published detail – and we tell you in writing which product we’re using and why, under The Garrison Standard.
Which IKO Models This Applies To

IKO’s wet-area products are mostly waterproofing and roofing components – self-adhered membranes, underlayments, and roofing shingles – rather than bath fixtures. Matching the right product to a Denton bathroom comes down to reading the label, not guessing from a photo online.
- Identify by label, not memory. IKO product names and series numbers are printed on the roll edge or the bundle wrap. Photograph the label before you discard the packaging – it’s the fastest way to confirm a match.
- Read the coverage and thickness. Membrane rolls are sold by width and length, and the coverage rating per roll is printed on the wrap. Installing the wrong width leaves seams where you don’t want them.
- OEM versus aftermarket. For waterproofing membranes, a compatible brand installed to the same detail is a fair substitute – the performance comes from the installation method and the substrate, not the logo. For roofing shingles, color and profile matching matter for street appearance and HOA approval in Denton.
- Check the substrate. Most failures we correct in Denton trace back to a wet or uneven substrate under the membrane, not the membrane itself. The right product on a bad surface still fails.
We work from a documented roster of name-brand materials, and where tile, cabinetry, or surfaces are involved, that includes KraftMaid, Cambria, and Silestone alongside the waterproofing system.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
Here’s what usually tips a Denton homeowner off that something under the tile is wrong:
- Grout that cracks or won’t stay sealed. Movement in the substrate or a failed waterproofing layer lets the tile flex. A membrane doing its job keeps that flex from reaching the grout line.
- Soft or spongy spots at the tub or shower edge. Water has reached the substrate. Often, the membrane edge detail or a missing corner piece was never done.
- A stain on the ceiling below. Water is finding its way past the pan or the wall membrane. This one moves fast – check it before the drywall gives.
- Musty smell in an exterior wall. Poor sealing at the floor-to-wall junction traps moisture. Denton’s humid spring and fall give it a place to grow.
- Tile that sounds hollow. Tapping a tile and hearing a dull thud usually means the thinset underneath is compromised, often from a damp substrate at installation.
North Texas heat cycling works against a bathroom wall behind an exterior wall – summer sun expansion and fall contraction stress the seams. In Denton specifically, we see more failures at south- and west-facing bathrooms, where the wall gets the most heat load.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed bathroom remodeling in Denton runs $9,000 – $28,000 for a full bath. A smaller bath or a targeted refresh lands in the $5,000 – $12,000 range. Here’s what drives the number:
| Scope | Installed range (Denton) |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What pushes a job to the top of a range: membrane and substrate work (the part most people forget to budget), tile selection, and how much of the wall you’re opening up. Every Bradford project starts with a written, line-item price before any tools come out – no numbers that move at the door. And every completed project is covered by the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. Our technicians have up to 22 years of experience.
DIY or Call Us?
Some things you can check yourself. Turn off the water, look for staining at the curb, feel for soft substrate, and photograph any product label you find. That’s useful information – bring it to the estimate.
What we’d steer you away from is tearing into a waterproofing system or a shower pan on your own. Once you cut into the membrane, you’re committed to rebuilding the whole detail – and a failed pitch or a missed corner piece is where most homeowner jobs in Denton end up leaking into the floor below within the first year. The labor to redo it usually costs more than hiring it right the first time. A proper waterproofing install is also where the real skill is, and it’s the part that carries your 365-Day coverage when we do it.
Call (844) 651-3175 and we’ll walk you through what you’re seeing before you schedule anything. Estimates are free.
FAQs

Ten to fifteen years is a fair expectation for a properly installed membrane when the substrate underneath was sound and dry at installation – the product itself isn’t usually the weak point. What shortens the life is a wet deck, missed seams, or a bad curb detail. When we install it, that’s exactly what the 365-Day Done Right Promise is protecting. Call (844) 651-3175 for a free assessment.
Sometimes – a localized defect at a seam or corner can be repaired, but only if the substrate beneath is dry and stable. If the water has already reached the deck, repair turns into replacement. We’ll tell you which one you’re looking at after we inspect it. Call (844) 651-3175 for a free estimate.
Most full baths take two to four weeks from demo to final walkthrough, depending on tile complexity and whether plumbing has to move. Smaller scope – a shower replacement or a vanity install – often runs a week or less. You’ll get the timeline in writing with the price.
We source through local building-supply distributors who carry the manufacturer’s current published specs, and we confirm the exact product, its coverage, and its install method in writing on the scope. If a compatible substitute makes more sense, you’ll see it in writing before we order. Call (844) 651-3175 for a free estimate.
Bradford Remodeling Co Denton gives you a written price before any work starts, background-checked technicians, and a live person on the phone 24/7. Call (844) 651-3175 for a free estimate on your Denton bathroom project.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












