







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Fence Installation: The Denton Owner’s Guide
We install fence systems built around IKO-specification posts, rails, panels and hardware, and the typical installed price in Denton runs $3500 – $9000 for a standard residential run. Most owners don’t discover a failing fence component until a post leans after a hard spring storm, a gate drags the ground, or a picket splits and the whole section rack-loads in the wind. In Denton, our techs see it most often after our clay-heavy soil runs through a wet-dry cycle up on the far north side near the loop, where active soil movement racks fence lines that were set shallow and never re-plumbed.

Key Takeaways
- Fence installation in Denton with IKO-compatible materials prices at $3500 – $9000 installed, written before work starts.
- Denton’s clay soil moves through wet and dry seasons and stresses posts that were never set below the frost-and-shift line.
- New fence work is planned work, so we schedule a site visit, not a same-day dispatch.
- Every finished fence comes with our 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge.
Which IKO Models This Applies To
IKO’s fence-facing product range includes vinyl picket, privacy rail, and decorative panel systems, plus the post and rail hardware that ties them together. The model or series stamp is usually on the inside face of a rail, on the post cap, or on a sticker on the box a panel arrived in. If you can’t find the label, measure the panel width and picket thickness; those two dimensions alone narrow the correct replacement almost every time. On the OEM-versus-aftermarket call, an IKO-branded rail or picket that matches your existing run means a like-for-like repair with the manufacturer’s warranty intact. A quality aftermarket equivalent can save money on a short repair, but the color, profile and gloss may not match, and mixing brands inside a single fence line is the most common cause of a mismatched patch we see in Denton. We source parts with traceable manufacturer specs and won’t slot in an untested piece just to finish a job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Fence Installation Is Failing
Every failure has a cause, and knowing the cause is the difference between a repair that holds and one that comes back next season.
- A post leans or racks after wind: the post was set too shallow or the footing was undersized for Denton’s clay movement, and the rail absorbs loads the post should carry. Left alone, the whole section twists and the pickets wobble.
- Pickets are split, cracked or chalky: UV exposure and Texas heat degrade a vinyl or composite picket that’s past its service life. Splitting at the fastener hole is the first sign the material is failing.
- A gate drags or won’t latch: stacked hinge movement or a sagging post has pulled the gate out of square. This is a hinge-and-post problem, not a gate problem, and swapping the gate alone won’t fix it.
- Rails are loose or bowed between posts: hardware has backed out or the rail was cut short for the span, leaving it to sag under its own weight. Re-tightening misses the real fault if the rail is undersized.
- The fence line is out of plumb along the run: a footing has moved with the soil. You can check this with a level against any post to see if the line has shifted.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Denton prices at $3500 – $9000 installed for a standard residential run, with the range driven by linear footage, material (vinyl, aluminum or composite), post count and footing depth, and how much tear-out the old line needs. Deeper footings on Denton clay push toward the top of the range; a short repair run stays near the bottom. The written price before work starts covers materials, labor, tear-out, and haul-away, and it does not move at the door. All finished fences are backed by our 365-Day Done Right Promise: if the work fails within that year, we return and correct it at no charge.
DIY or Call Us?
You can safely walk the line yourself: check each post with a level, watch for pickets splitting at the fasteners, test the gate swing, and note which sections rack in a strong wind. What sends most DIY fence repairs wrong isn’t the visible work; it’s the footing. Digging a new post to the right depth in Denton’s shrink-swell clay, mixing and setting concrete, and setting the post plumb so the whole line stays square is where the repair fails within a season. Add running a full panel length alone and the risk goes up fast. If the run is short and cosmetic, you can handle it. If the posts are moving or the line is out of plumb, call (844) 651-3175 for a free estimate.
FAQs

A properly set IKO fence system should hold 15 to 20 years in Denton’s climate, with post footings and attachments doing most of the deciding. UV exposure and clay-soil movement are the two things that shorten that, which is why footing depth matters more than the panel itself. Call (844) 651-3175 for a free estimate on your run.
Often yes. A leaning post, a dragging gate or a few failed pickets are usually a targeted repair, not a full replacement. If most of the line is out of plumb or the pickets are chalky and splitting across the run, replacement is the honest answer. Call (844) 651-3175 and we’ll tell you which you’re facing.
A standard residential run is typically a one-to-three-day job, depending on footage, material and how much tear-out the old fence needs. We confirm the schedule in writing before work starts, so you know what to expect. Call (844) 651-3175 to schedule your free estimate.
We match your panel dimensions and picket profile to the correct IKO-compatible part using the label or measurements, then confirm the spec before we order. We work with an approved brand roster (also KraftMaid, Cambria and Silestone on other jobs), so specs and warranties are traceable, not guesswork. Bradford Remodeling Co Denton is an independent service provider and is not affiliated with IKO.
Call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate. We’ll put the price in writing before any work begins, and every completed project carries our 365-Day Done Right Promise. A live person answers the phone any hour, any day.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












