







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Denton Owner’s Guide
Tamko-compatible fence installation in Denton typically runs $3,500 to $9,000 installed, with the exact number set by lineal footage, fence height, gate count, and how much old fence and footing has to come out first. A live person at (844) 651-3175 will give you a written price before anything starts. We’re an independent contractor and not affiliated with Tamko, but we install fencing built to Tamko’s spec for this market.

Here’s how most Denton owners land on this page. The fence has been up a while. One run along the property line starts leaning after a spring wind, a gate starts dragging, or a post gets soft at the soil line and the whole panel sways. It reads as one broken part, but what’s usually failing is the post-and-footing system underneath it, or the panel fasteners that have backed off in our clay soil. That distinction is the whole ballgame when you price the repair, and it’s what we sort out before we quote.
Which Tamko Models This Applies To

Tamko’s fence and railing line covers privacy panels, pickets, gates, and the posts and caps that hold them. The series matters because post sizes, rail profiles, and cap dimensions differ between lines, and a cap or bracket that fits one series won’t seat on another. The reliable way to identify what you have is to read the label or ink stamp on the inside face of a rail, or on the post if you can reach one, and measure the post’s actual cross-section with a tape, not by eye. If the label is gone, a photo of the joint, the cap, and the post together plus a measurement gets us the right match on the first try.
Where Tamko sells an OEM part, we spec it when the fence is a design you plan to keep for years, because the manufacturer’s spec and finish are traceable. Where the part is a bracket, fastener, or cap that only needs to be dimensionally correct, a quality aftermarket equivalent at half the cost is a sound call, and we’ll tell you which is which rather than defaulting to the pricier one. We don’t carry stock, so we source the specific part your fence needs rather than swapping in something close.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
The symptoms below are the ones we see most in Denton, and each points to a specific cause worth checking before you spend money on the wrong fix.
- A post that’s loose and rocks in its hole. Water has gotten under the footing or the soil has shifted around it. Denton’s clay expands and contracts hard with the wet-dry cycle, and that heaving pulls posts out of plumb over time.
- A gate that drags on the ground or won’t latch. The hinge post has settled or twisted a few degrees. A sagging gate is usually a post problem, not a gate problem, and adjusting the gate alone won’t hold.
- Panels that lean as a unit, not one board at a time. The rail-to-post fasteners or brackets have backed out. This is the failure that a fresh set of correctly sized brackets actually solves.
- Soft, splintering, or discolored wood at the soil line. Moisture has reached the post below grade. North Texas summers and fall rains push above-ground components harder, and a post that’s soft at the bottom is failing from the inside.
- A cap or trim piece lifting or cracking at the top. Sun exposure and thermal cycling have degraded the fastening or the material. Capped posts and rails go first on west- and south-facing runs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Denton fence work, we install in the $3,500 to $9,000 range, and that reflects the full panel-to-post scope rather than a single swapped part. Prices depend on lineal footage, fence height, the number of gates, post size, whether old footings have to be dug out, and site access. Our written price breaks out materials, labor, and old-fence haul-off as separate lines so you can see exactly what you’re paying for. We pull the permit where the scope requires one and pass the inspection before we call the job finished.
Every completed fence carries the 365-Day Done Right Promise: a full-year written guarantee, and if any of the work fails inside that window, we come back and correct it at no charge. The price you sign is the price you pay, with no numbers moving at the door. You’re not chasing the cheapest bid here; you’re getting a documented scope, a fixed written price, and a signed guarantee in your hand at close.
DIY or Call Us?
There’s real work an owner can safely do. Walk the fence line after a good rain and mark the posts that move. Tighten any visibly backed-out fasteners. Photograph the labels, the joints, and any soft spots, and measure the post. That homework is worth doing, and it makes our quote faster and tighter.
Where DIY goes wrong is the structural side. Pulling the wrong fastener or bracing a sagging panel can mask a failing post that fails harder a few months later. Digging out and resetting footings in Denton clay is heavy work, and a footing that’s under-dug, under-set, or leveled wrong will heave again in one wet-dry cycle. A misplaced post or a footing the inspection doesn’t pass means redoing it twice. For anything that’s a footing, a load-bearing post, or a gate that’s carrying weight, this is where a trained crew earns its keep. Call (844) 651-3175 and we’ll tell you plainly whether your fence needs a repair or a full install.
FAQs

Expect a well-installed Tamko-compatible fence to hold for 15 to 20 years or more, and the footing is what decides it. Fences here take the same weather the roofs and siding do, and posts set correctly for our clay and drainage last far longer than posts set shallow. Call (844) 651-3175 for a look at your specific fence.
Often yes. A leaning panel with sound posts and good above-grade material is a fastener-and-bracket repair, and a single soft post can be cut out and reset without replacing the run. A fence with several soft posts and footings that have all heaved is usually a replace, not a patch.
A straight repair on a handful of posts and panels is a one- to two-day job on most lots. A full install over a typical residential run runs several days depending on footage, gate count, and how much old footing has to come out. We put the schedule in the written scope, and a live person answers the phone 24/7 to talk through it.
We read your fence’s series and measurements, then match it to the correct Tamko part or a quality equivalent, and tell you which option we’re recommending and why. We don’t inventory parts or keep any on hand, so the right part is ordered to your fence. If your project stretches to cabinetry, counters, or interiors, we also work with KraftMaid, Cambria, and Silestone.
If your fence is leaning, your gate is dragging, or a post is soft at the soil line, call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate. You’ll get a live person, a written price before any work starts, background-checked and uniformed technicians you know by name before they arrive, and the 365-Day Done Right Promise on the finished work.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












