







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Denton Owner’s Guide
A full bathroom remodel with PGT-line materials and fixtures typically runs $9,000 to $28,000 installed in Denton, and that number is written down before we lift a tool. We’re an independent contractor, not PGT, but we install to PGT-compatible specs every week and we price the whole job up front, parts and labor on one line-item sheet. No number moves at the door.

Most Denton owners don’t land on this page because they “want a PGT bathroom.” They land here because something failed. A vanity top has a hairline crack spreading from the faucet cutout. A shower pan is flexing underfoot and the grout lines around it have gone dark. Or a fixtures package bought for a PGT-line build no longer matches what’s on the shelf, and the whole plan stalls. You know the part. You want it matched to your model, priced honestly, and installed once, right.
Which PGT Models This Applies To

PGT’s window and door lines are the name most people know, and much of what a Denton homeowner calls “PGT bathroom” work is rooted in the same product-design vocabulary: framed openings, specific interior dimensions, and hardware that has to match a nominal callout rather than a “close enough” measurement. The first job on any bathroom is identifying what you actually have, and that means reading labels, not guessing.
Look for the manufacturer’s label inside the cabinet door, on the vanity back panel, or on the fixture carton. Write down the series and the exact nominal size. Here’s the compatibility gotcha that trips people up: nominal sizes round. A “30-inch” vanity or a “60-inch” shower pan is a marketing number, not a rough-opening number. The rough opening is what the installer frames to, and it’s often a half-inch off the label in one direction. The available spec sheet, not the box, is the authority. That’s why we measure the opening ourselves before we quote – measuring the old unit and ordering the same callout gets you a return-trip problem.
The OEM-versus-aftermarket call for PGT specifically comes down to two things: fit and warranty chain. An OEM part carries the manufacturer spec and keeps a manufacturer warranty intact. A quality aftermarket equivalent can match the spec and cost less, but only when the specs match line for line. When they don’t, you find out at install. We work with a documented roster of name-brand materials, so specifications are traceable and quality isn’t left to guesswork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
- Hairline cracks radiating from the faucet cutout. That’s stress at the weakest point of the top, usually from an undermount or a cut too close to the edge. Left alone, it runs.
- A shower pan that flexes or sounds hollow underfoot. The pan has lost contact with the substrate below, and the movement works the grout and caulk joints until water gets behind them.
- Dark grout lines or soft spots at the shower perimeter. Moisture is wicking behind the tile or panel because a joint failed. Denton’s clay soils shift with our wet-dry swings, and a slab that moves transfers that movement into the shower base.
- A vanity that pulls away from the wall or sags at the cabinet base. Either the fasteners into the studs are inadequate or the floor has settled unevenly under the cabinet.
- Fixtures that no longer seat or seal cleanly. A cartridge or valve that won’t shut off fully is a small part failure with a big cost if it’s ignored: it drips behind the wall.
None of these are cosmetic. Each one is a failure that gets more expensive the longer it’s on your list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Denton, a full bathroom remodel with PGT-compatible materials lands at $9,000 to $28,000 installed. A small bathroom remodel runs $5,000 to $12,000. If the failure is localized, here’s how the line items break out:

| Scope | Installed range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
| Full bathroom remodel | $9,000 – $28,000 |
What drives the range: whether the rough-in has to move, whether the substrate is sound or has to be replaced, and the material tier you choose. Parts and labor are quoted on one written sheet so you can see where the money goes. Every completed project is covered by our 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check a label, measure an opening, look for soft spots, and confirm a rough-opening dimension against a spec sheet. That’s diagnosis, and it saves time. What you shouldn’t DIY is anything behind the finish: a shower pan that has to be set in mortar, a valve cartridge that involves shutting off and reopening a water line, or a top that has to be cut and fitted. This is a water-damage trap, not a weekend win. Tear out wrong and you’re looking at a substrate replacement on top of the original problem, and nobody wants to pay twice.
Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and you’ll know who’s coming through your door before they arrive. Call (844) 651-3175 to schedule your free estimate. A live person answers, not a voicemail.
FAQs

A properly installed bathroom build holds up 15 to 20 years on the structure itself, but the wear parts go sooner: cartridges in the 5 to 10-year range, caulk joints every few years, and grout in a shower that sees daily use. In Denton, the wet-dry seasonal swings put more stress on exterior-facing walls, so perimeter joints deserve a check each spring. Call (844) 651-3175 for an exact quote – estimates are free.
Sometimes. A cartridge, a reseated fixture, or a re-caulked joint is a repair, and it’s the right call when the substrate is sound. A cracked top or a pan that’s lost its connection to the floor is a replacement, not a patch, because the failure is structural. We’ll tell you which one you have instead of selling you the bigger job. Call (844) 651-3175 to schedule your free estimate.
A localized replacement like a vanity or a shower replacement is often a one to three-day job once materials are on site. A full bathroom remodel runs one to three weeks depending on rough-in changes and substrate work. You’ll get the schedule in writing with the price, before work starts. Call (844) 651-3175 for an exact quote – estimates are free.
We measure the rough opening and confirm the spec sheet before anything is ordered, so the part matches your model rather than the box label. We source through a documented roster of name-brand materials, and we can also quote KraftMaid, Cambria, and Silestone selections alongside PGT-compatible fixtures. Call (844) 651-3175 to get the sourcing moving – estimates are free.
Bradford Remodeling Co Denton is part of the Garrison Partners family and is held to The Garrison Standard: a written price before any work starts, a signed 365-Day Done Right Promise at close, a clean site, and a real person on the phone. Call (844) 651-3175 for your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












