







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Denton Owner’s Guide
Fence work in Denton usually runs $3,500 to $9,000 installed, and most projects are scheduled within a week or two of the estimate. If you own a PGT product and a section has failed, the repair itself often costs less than a full run. Most Denton homeowners find out something’s wrong the same way: a post leans after a heavy rain, a gate drags on the slab, or a panel stays bowed after the last wind event.

This page covers PGT fence installations specifically. One thing to state up front: Bradford Remodeling Co Denton is an independent service provider and is not affiliated with PGT. We match materials and hardware to the product you own, and we put the price and the guarantee in writing before any work starts.
Which PGT Models This Applies To

PGT makes fence systems across a few product lines, and the parts don’t cross over cleanly between them. The line and series stamped on the post cap, on the panel rail, or on a label near the hinge is what determines the correct replacement bracket, hinge, or post anchor. Before we order anything, we measure the rail spacing and post thickness on your actual run. Specs from the model sheet don’t always match what’s installed on a lot built ten years ago.
The OEM-versus-aftermarket call is the one most Denton owners get wrong. PGT-branded parts are the surest fit and carry the manufacturer’s own warranty. Quality aftermarket equivalents cost less and hold up in Texas heat, but the fit is where they earn or lose their keep, since a hinge that’s a fraction off will bind a gate every time it closes. We give you both prices in writing so the trade-off is yours to make, not ours to talk you into. Our technicians have up to 22 years of experience, and most of it has been spent matching hardware to the product already on the ground.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Fence Installation Is Failing
North Texas weather ages a fence faster than most of the country. Clay soil that swells after rain and shrinks in summer pulls posts out of plumb, and the high UV load on the western exposure breaks down coatings and clips ahead of schedule. Here’s what a failing run usually looks like:
- Posts leaning after rain. The concrete footing is shifting in expanding clay, not just the post settling. Re-leveling the post above ground treats the symptom; the soil movement is the cause.
- A gate that drags or won’t latch. The hinge has worn or the post has moved. Hinge wear is a swap; post movement is a reset, and they carry very different price tags.
- Loose or rattling panels. Fasteners have backed out or the bracket has cracked. In Denton, this often shows up on the south-facing run where heat cycling is worst.
- Visible rust at the hardware. Coating failure at the clips and brackets, common on older runs that saw a few summers before the finish gave out.
- Panels that stay bowed after wind. The rail has lost stiffness. It won’t straighten on its own, and a bent rail under tension is where a fence board becomes a moving part.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a PGT fence installation, Denton pricing runs $3,500 to $9,000 for a full section or run. That figure is a written price before any work starts, not a range that moves when the crew shows up. What drives it:
- Linear feet and post count. More posts means more footings, and footings are the largest single line item.
- OEM versus quality aftermarket parts. We show both on the estimate.
- Gate hardware and reset work. A gate reset that includes footing work sits at the top of the range.
- Site access and tear-out. Hauling off an old run adds labor, and we price it plainly instead of folding it into the total.
Every completed project carries the 365-Day Done Right Promise. If the installation fails within that year, we come back and correct it at no charge. The parts and labor are itemized separately on the estimate so you can see exactly what you’re paying for. We also install fence lines alongside siding and trim work, and we work with a documented roster of name-brand materials including KraftMaid, Cambria, and Silestone for the interior side of the job.

DIY or Call Us?
Some things are safe to check yourself. Walk the run and note which posts are out of plumb, test each gate for drag, and look at the brackets for cracks or rust. Photograph the model stamp or label so the part match is exact.
Where DIY goes wrong on fence work is the footing and the tension. A post set in North Texas clay without proper depth and drainage will pull out again by the next wet season, and a panel under tension can snap back on you when it’s cut or unclamped. That’s not a job to reason through with a YouTube video. Call (844) 651-3175 and we’ll give you a straight number on the repair before you decide anything.
FAQs

Expect 12 to 20 years for a well-installed run in this climate, with the footing quality and sun exposure deciding which end of that you get. UV on the western side and clay movement are the two forces that wear a fence fastest here. Call (844) 651-3175 for a free estimate if you’re unsure how much life yours has left.
Often, yes. A hinge swap or a single post reset costs a fraction of a new run, and we’ll tell you plainly when repair is the smarter call. If the rail has lost stiffness or the footing has shifted across several posts, replacement is usually the better number. Call (844) 651-3175 and we’ll price both.
A single-section repair is typically a half-day, while a full run runs one to two days depending on length and gate work. We schedule around weather, since wet clay is the wrong time to set a post. Call (844) 651-3175 to get on the schedule.
We match by the line and series stamped on your product, measure the actual run on site, and quote you the OEM and quality aftermarket prices side by side. No parts are carried on a truck; each piece is ordered to your spec. Call (844) 651-3175 for a free estimate and a written price.
You’ve got a failed fence section and a product in hand. What you need next is a written number and a crew that shows up. Bradford Remodeling Co Denton answers the phone with a live person 24/7, sends background-checked, uniformed technicians, and backs the work with the 365-Day Done Right Promise. Call (844) 651-3175 for your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












