







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Denton Owner’s Guide
A PGT home addition or ADU in Denton typically costs $45,000 – $130,000 installed, with detached accessory units running $90,000 – $220,000. No addition or ADU is a same-day job – these are permitted, inspected builds measured in months, not hours. Owners usually arrive at this page after a different discovery: a PGT impact window or door unit in an existing addition has fogged, the sash has dropped, or a hard-latch has stopped catching, and the original installer is gone. We install and service PGT-compatible additions and ADU envelopes across Denton, and we’ll tell you straight whether you’re looking at a part swap or a build.

Which PGT Models This Applies To

PGT makes the WinGuard line (impact-rated), the Estate Collection, and the Architectural Series, and the part you need is tied to the series, not just the opening size. An Estate Collection sash will not fit a WinGuard frame: impact units carry a heavier sash, a reinforced interlock, and a different balance rating because the laminated glass weighs substantially more than standard insulated glass. That’s the compatibility gotcha most Denton homeowners hit – buying a balance rated for standard glass and watching it fail inside a year on an impact sash.
To identify your unit, open the sash and look for the certification label on the jamb or the top of the sash. It lists the series, the glass package, and a unit ID. Measure the visible glass width and height, not the frame. With those three things, a supplier can match the correct operator, balance, weatherstrip, or screen frame.
OEM versus aftermarket: PGT-specific hardware (operators, keepers, screen frames) is worth buying OEM because the mounting patterns are proprietary. Balances, weatherstrip, and rollers have quality aftermarket equivalents that perform identically at lower cost. We’ll tell you which side of that line your part falls on. We are an independent contractor and not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
- Fogging or hazing between panes. The sealed unit’s desiccant is saturated and the spacer seal has failed. Common on south and west elevations in Denton where afternoon sun loads the glass hardest.
- The sash won’t stay up, or slams down. The balance has lost tension or the wrong balance was installed for the sash weight. On impact glass this happens fast if someone substituted a standard balance.
- Hard-latch won’t engage or pops open. The keeper has shifted or the latch mechanism has worn. On an egress opening this is a life-safety defect, not a nuisance.
- Water staining at the sill or jamb inside the addition. Failed weatherstrip or a missing head flashing detail. Texas wind-driven rain finds both, and the damage behind the drywall is always worse than the stain.
- Drafts and visible daylight at the frame. Shrunken weatherstrip or a frame that was shimmed and foamed incorrectly at install. In Denton’s summer heat load, a drafty unit also drives your cooling bill up.
These symptoms apply equally whether the failed unit sits in a finished home addition or an ADU. The envelope is the envelope.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full PGT-compatible home addition in Denton, budget $45,000 – $130,000. Detached ADU construction runs $90,000 – $220,000, and a garage conversion into living space runs $30,000 – $80,000. If your scope is limited to replacing failed PGT units inside an existing addition, window replacement in Denton runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000.
What drives the range: foundation and slab work, roof tie-in complexity, permit and inspection fees, MEP rough-in distance from the main panel, and the finish level you choose. Every Bradford project gets a written price before any work starts – itemized, with parts and labor separate – so the number you sign is the number you pay. All completed work is covered by the 365-Day Done Right Promise: if it fails within that year, we return and correct it at no charge.
DIY or Call Us?
You can safely check the certification label, measure the glass, test the latch by hand, and photograph the fogging or water stain. That’s diagnostic work, and it’s useful.
What you shouldn’t do: pull an impact sash out of its frame, re-flash a head detail on an addition, or open a wall to chase a leak. Impact glass is heavy and the sash can come down hard; flashing work done wrong sends water into the wall cavity and you won’t see the damage for two seasons. On permitted addition and ADU work, unpermitted repairs create a disclosure problem at resale in Denton. A failed sealed unit, latch, or balance is a quick, clean swap for a crew that carries the right part. Call Bradford Remodeling Co Denton at (844) 651-3175 and we’ll schedule a free estimate.
FAQs

Plan on 20 – 25 years for the frame and 12 – 18 years for the sealed glass unit in North Texas. Denton’s summer heat cycling and spring hail load the spacer seal harder than a milder climate would, so fogging usually shows up well before the frame is done. Call (844) 651-3175 for an exact quote on a replacement – estimates are free.
Sometimes. Balances, rollers, weatherstrip, and latches are replaceable parts and a repair is the right call when the glass and frame are sound. A fogged sealed unit or a cracked impact sash cannot be repaired – it gets replaced. We’ll tell you which one you’re facing before you spend anything. Call (844) 651-3175 to book a free estimate.
A single balance, latch, or weatherstrip replacement is a short visit, often under an hour. A full sealed-unit or sash replacement takes longer because the sash has to come out, the new unit set, and the opening checked for water tightness. We’ll give you the window in writing before we start. Call (844) 651-3175 to schedule.
We match by series, unit ID, and glass package using the certification label, then order from the manufacturer or a quality aftermarket supplier. We don’t claim to stock PGT parts or carry them on a truck – the part is ordered to your unit. That’s why the label matters. Call (844) 651-3175 for a free estimate and we’ll tell you exactly what we need to order.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












