







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Denton Owner’s Guide
CGI-compatible bathroom remodeling in Denton typically runs $9,000 – $28,000 installed, with smaller bathrooms landing at $5,000 – $12,000. We schedule these as planned projects, and after a written price is set, the number doesn’t move. Most Denton homeowners discover a problem the same way: a vanity that sat level in March rocks by July, tile grout that cracks along a shower pan, or a toilet flange that starts weeping onto the subfloor without a drop showing upstairs.

Denton sits on expansive clay soils, and that shale-heavy ground swells and shrinks with every wet and dry cycle. Bathroom floors and wet walls take the brunt of it. When something in a CGI-finished bathroom fails, the part is usually fine. The substrate under it moved.
Key Takeaways
- Full CGI-compatible bathroom remodel in Denton: $9,000 – $28,000; small bath: $5,000 – $12,000.
- Most failures we see in Denton trace to soil movement and moisture, not bad fixtures.
- Every price is written before work starts, and every project carries the 365-Day Done Right Promise.
- Bradford Remodeling Co Denton is an independent service provider, not affiliated with CGI.
Which CGI Models This Applies To

We work with CGI bathroom finishes across the common residential lines, from builder-grade vanity tops and integrated sinks to shower surrounds, tub decks, and wall panels. If your CGI product has a model label on the back of the vanity, inside the sink bowl, or on the edge of a shower panel, that label is what we match against. Take a photo of it before you call. It saves a trip and it prevents the wrong part showing up on install day.
Here’s the compatibility gotcha most homeowners miss: CGI vanity tops are cut to a specific depth and backsplash height, and a replacement top that’s a quarter inch off will either overhang the cabinet or leave a gap at the wall that no amount of caulk hides cleanly. Measure the cabinet box, not the old top. Same story with shower panels – the panel thickness and the trim profile have to match the rough-in, or the seams won’t sit flush.
On the OEM-versus-aftermarket call: OEM CGI parts fit the first time and cost more. A quality aftermarket equivalent from a documented brand like Kohler or Moen can save real money on fixtures, and we’ll tell you when it’s a fair swap and when it isn’t. We don’t stock parts and we don’t carry them on a truck. What we do is source against your model number and your measurements, with the manufacturer spec sheet in hand before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
These are the five symptoms we get called about most in Denton, and what’s usually underneath each one.
- Grout cracking along the shower floor or wall seams. The pan or the backer board has shifted, and the grout is the first thing to show the strain. Left alone, water gets behind the tile.
- A vanity that rocks or pulls away from the wall. The cabinet wasn’t shimmed and anchored to handle clay-soil movement, or the wall behind it has taken on moisture. Either way, the fasteners are losing their grip.
- Soft or spongy floor near the toilet or tub. A slow flange leak has been soaking the subfloor, often for months. This is the one to act on quickly, because subfloor rot spreads.
- Caulk lines that keep reopening after you re-caulk them. Re-caulking treats the symptom. If the joint keeps failing, the two surfaces are moving against each other and the backing needs attention.
- Peeling paint or bubbling drywall on the wall behind the shower. Moisture is getting through the wet wall assembly. In North Texas humidity, this shows up fast once the vapor barrier is compromised.
In Denton, we regularly see spring failures along bathroom floors in homes built on the older clay-heavy lots near the courthouse square – the soil moves more there than on the sandier ground out toward Rayzor Ranch. Age of the home matters less than the soil under it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a CGI-compatible bathroom project costs in Denton, installed, with the price written before any work starts.
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: whether the subfloor needs repair, whether the rough-in plumbing has to move, the size of the tile, and whether you’re choosing a documented name-brand fixture (Kohler, Moen, KraftMaid cabinetry, Cambria or Silestone surfaces) or a builder-grade equivalent. We itemize parts and labor separately so you can see exactly what you’re paying for. No numbers that move at the door. Every completed bathroom carries the 365-Day Done Right Promise – if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely do a few things yourself: check the model label on your CGI product, photograph it, measure the cabinet box and the rough opening, and dry off any standing water. You can also run a finger along the base of the toilet to feel for softness in the subfloor.
Where DIY goes wrong is the moment you cut into a wet wall or lift a shower pan. Behind that tile is the waterproofing layer, and once it’s breached, water goes into the framing. Same with anything that touches the supply lines or the drain rough-in – a mistake there means a leak inside a wall you can’t see. And if you find soft subfloor, stop. That’s a structural repair under a finished surface, not a weekend patch. Call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate. A live person answers, day or night, and the written price comes before any tool comes out.
FAQs

A well-installed CGI shower surround or vanity top typically holds 15 to 20 years, but in Denton the soil and humidity are the real clock. Homes on the expansive clay near the square tend to need substrate attention sooner than homes on firmer ground. The finish outlasts the backing every time, which is why we check the substrate before we quote the surface.
Sometimes, yes. Regrouting and re-caulking buy time if the backing is still sound, and a rocking vanity can often be re-anchored if the wall behind it is dry. But if the subfloor is soft or the wet wall has taken on moisture, a repair is a patch over a bigger problem. We’ll tell you which one you’re looking at in the estimate – free, and in writing.
A vanity or shower panel replacement is usually a one-to-two day job. A full bathroom remodel with substrate repair runs one to three weeks depending on tile and fixture lead times. We give you the schedule in the written scope so you know when the crew arrives and when the site gets cleaned up.
We match against your model number and your own measurements, then confirm the spec sheet from the manufacturer before ordering. We don’t stock parts and we don’t carry them on a truck – every part is sourced to your specific model. If a documented aftermarket fixture from Kohler or Moen fits and saves you money, we’ll say so. If it doesn’t, we’ll say that too.
Ready to get the number in writing? Call Bradford Remodeling Co Denton at (844) 651-3175 for your free estimate. Background-checked, uniformed technicians, a written price before work starts, and a full year of coverage on the finished job.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












