







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Denton Owner’s Guide
Fence installation matched to ES Windows specifications in Denton runs $3,500 to $9,000 installed, depending on linear footage, material, and site conditions. We install fence systems that fit ES Windows property lines and gate hardware correctly the first time, and we give you a written price before any dig starts. Most Denton owners discover the problem the same way: a gate that drags on the ground, a post that has shifted after a spring storm, or panels that no longer line up with the window elevations they were built alongside. When the fence and the window wall stop agreeing, it’s usually a footing or hardware issue, not a cosmetic one, and it’s worth getting a real answer before the next rain.

Which ES Windows Models This Apply To

ES Windows is a Florida-based manufacturer, and its product lines are the replacement and new-construction vinyl and aluminum window and door systems common on Gulf Coast and Texas builds. Fence work specified alongside these systems usually means a perimeter or privacy fence built to match the window and door layout, gate positions, and property-line setbacks the ES Windows drawings established on the original build. The compatibility question is real: fence height and panel spacing passed by the original permitting don’t automatically carry to a rebuild, and Denton has its own rules on setback from the property line and height in front versus side yards, so we check local requirements before we order a single picket.
To identify what you have and what fits, look for the ES Windows certification label or the AAMA sticker on the window or door frame itself, photograph it, and note the rough opening dimensions of any gate or passage the fence must align to. If your build is newer, the original ES Windows shop drawings or a municipal permit record may specify the fence line and gate swing. On the OEM-versus-aftermarket decision: for fence hardware like hinges, latches, and post anchors, a quality aftermarket part matched to the load and spacing works fine. For gates that must meet an ES Windows opening or a specific privacy requirement, we match the manufacturer spec or the permit drawing, not a generic panel size. Bradford Remodeling Co Denton is an independent service provider and is not affiliated with ES Windows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Fence Installation Is Failing
Fence failures announce themselves before they collapse. Here are the five symptoms we see on Denton properties, and what’s actually going on underneath each one.
- Posts that lean or rock when you push them. The footing has lost its grip, usually after clay soil swells and shrinks through a wet-dry cycle, or because the post was set too shallow to begin with.
- A gate that drags or won’t latch. A hinge has worked loose or a post has shifted a fraction of an inch, and that fraction is enough to throw the gate out of square.
- Panels bowing or pulling from the rails. Fasteners have backed out or the pickets are warping from moisture cycling, common in North Texas where summer heat and spring storms work on the wood or composite.
- Rotted or split post bases at grade. Water is standing against the post at the soil line. Wood wicks it upward, and the rot travels faster than most owners expect.
- Concrete cracking or lifting around the posts. Either the mix was thin, the soil moved under a shallow pour, or a root is pushing up from below. Any of the three means the footing needs a look.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Denton, priced as installed work, lands in these ranges:
- Vinyl fence installation: $3,500 – $9,000. The most common choice for Denton properties. Vinyl holds color in the Texas sun and doesn’t rot.
- Aluminum fence installation: $4,000 – $10,000. Longer life, cleaner sight lines, and less maintenance than wood.
What drives the number is linear footage first, then post spacing and footing depth, then gate count and hardware, then whether the old fence has to come out and be hauled off. Clay soil in Denton can mean deeper footings than a contractor from another market would quote, which is why the written price matters. Every quote is parts plus labor, line by line, so you see the footage, the material, the footings, and the gates as separate numbers. The finished fence carries the 365-Day Done Right Promise: if any part of it fails inside a full year, we come back and correct it at no charge. That’s not a handshake. It’s a signed guarantee in your hand at job close.

DIY or Call Us?
You can safely check the obvious things yourself: push-test the posts for rock, look at the soil line for rot, check that gate hinges are snug, and measure the fence run so you have a footprint for a real quote. Walk the property line with a tape, photograph the ES Windows label if the fence ties to a window or door opening, and note which panels are failing.
Where DIY goes wrong is the footing. Setting posts in North Texas clay means digging past the active soil zone, mixing concrete to the right ratio, and getting the depth that keeps a post from lifting through a wet season. A fence that looks fine in October can heave by March. Gate alignment and load on the hinges is the other place homeowners get hurt or end up redoing the job. If the posts are sound and it’s just hardware, that’s a smaller fix. If the footings are moving, this is real construction. Call (844) 651-3175 for a free estimate and we’ll tell you which one you’re facing.
FAQs

A properly footed vinyl or aluminum fence in Denton should hold for 20 years or more. Wood is the wildcard – it can go 10 to 15 years if it’s kept dry, but clay soil movement and Texas heat shorten that. The footing is what determines whether the fence lasts or leans.
If the posts are solid and the damage is limited to panels, rails, or gate hardware, yes. A repair is often the right call and much cheaper. If the footings are moving or the post bases are rotted, repair is throwing money at a problem that comes back, so call (844) 651-3175 and we’ll tell you honestly which one your fence needs.
Most residential fence installs take one to three working days, depending on footage and how many gates are involved. Removal of an old fence and haul-away adds a day. We schedule around weather, and we give you the timeline in writing before the crew shows up.
We work from a documented roster of brand-name materials so every spec is traceable, and we order fence materials to match the permit drawing or the ES Windows opening dimensions. You get the manufacturer specs and warranty paperwork with the finished fence. Call (844) 651-3175 to schedule your free estimate – we’ll confirm the footage, the footings, and the written price before anything is ordered.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












