







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Denton Owner’s Guide
We install ES Windows-compatible driveway and paver systems across Denton, and a full paver driveway typically lands between $7,000 and $18,000 installed, with concrete running $4,500 to $12,000. Paver repair and re-lay work on a failing section is often quoted within a week, and estimates are free. If your ES Windows system is part of the hardscape tie-in at the front of the house, a failing drive section usually shows up as water pooling against the wall plate or a rutted border where the units meet grade. We’re an independent remodeling contractor, not affiliated with ES Windows, and we install and repair the driveway and paver work that supports those entry systems.

Which ES Windows Models This Applies To

ES Windows handles window and door lines, and the driveway and paver scope connects wherever the entry threshold meets the exterior hardscape. The part that matters here is the base and grade detail at the door-to-drive transition: the paver or concrete apron that carries water away from the sill plate. That transition detail differs across entry and door thresholds, and it also shifts between ES Windows series lines and the door frames they’re set into. We identify the right approach by measuring the threshold height, checking the existing slope away from the wall, and reading the door or frame label to confirm the model line.
ES Windows doesn’t make pavers, so the “part” here is a compatibility question, not a factory component. That’s the decision point on any Denton job: OEM spec matters at the threshold and sill detail, and aftermarket pavers or concrete are fine for the field grade as long as the base is built to spec. Where the system uses a sill pan or a specific threshold height, the hardscape has to match that dimension down to the quarter inch or you’ll get water intrusion at the door. We install Belgard and Unilock pavers on the driveway side, and we can reference KraftMaid, Cambria, and Silestone if your project pulls in interior finishes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
- Water pooling at the door threshold. The paver apron has settled or the slope away from the wall fell below spec, so water runs back toward the ES Windows frame instead of away from it. Left alone, this is what rots the sill.
- Sunken or rutted pavers near the drive edge. North Texas clay shrinks and swells with our wet-dry swings, and a shallow base gives way under that movement. That’s the single most common failure we see on Denton driveways.
- Loose or rocking pavers. The bedding sand has washed out or the base wasn’t compacted in lifts, so individual units move underfoot and grind against their neighbors.
- Weeds and joints opening up. Joint sand has eroded out, which lets water in and lets the paver field spread. Joint sand is the first thing to refresh and the cheapest fix.
- Cracking or heaving at a concrete apron or border. Clay movement or a missing expansion joint is pushing the slab up, and that pressure reaches the door frame if the apron butts hard against it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what our Denton driveway and paver work runs, installed, with a written price before any tool comes out:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
The range moves on square footage, base depth, paver choice, and how much demo and haul-off the old drive needs. Every quote is line-itemed for parts and labor, so you see where the money goes. The finished work is covered by our 365-Day Done Right Promise: if it fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: hose the apron and watch where water goes, press down on pavers to feel for rocking, and look at joint sand for gaps. What goes wrong in DIY is the base and the slope. A driveway that’s not built on a properly compacted, deep-enough base fails within a season or two on Denton’s clay, and water that’s graded the wrong way quietly works into the ES Windows threshold. That’s the expensive mistake. Serving Denton and nearby areas, we build to spec and back it with the written guarantee. Call (844) 651-3175 to schedule your free estimate.
FAQs

How long does a paver driveway or apron last in Denton? A properly built paver drive lasts decades, but the base is what decides that in North Texas clay. Refreshing joint sand every few years keeps it tight.
Can a failing section be repaired instead of replaced? Yes, often. If the base is sound, we can lift, re-bed, and re-lay the affected pavers and re-grade the slope away from the door. Call (844) 651-3175 for a free estimate.
How long does the work take? A paver apron at the threshold is usually a day or two; a full driveway runs several days depending on size and base conditions. We put the schedule in writing up front.
How do you source the pavers? We work from a documented roster of name-brand materials like Belgard and Unilock, so specs and manufacturer warranties are traceable. Call (844) 651-3175 to get started.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












