







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Denton Owner’s Guide
If you have a failing Mr-Glass driveway or paver surface in Denton, we install Mr-Glass-compatible systems and repair the parts that break first – base failure, settled pavers, and open joints. Most driveway and paver work on a Denton property runs $7,000 – $18,000 installed for a full paver driveway and $3,500 – $11,000 for a paver patio, with smaller repair scopes priced far lower. Give us a call at (844) 651-3175 and you’ll get a written price before any work starts.

Owners usually find the problem the same way: a driveway that drains toward the garage instead of away from it after a hard Denton rain, pavers that rock underfoot, or a widening line of open joints between the field and the border course. By the time you notice it from the street, the base has usually been moving for a season or two. The surface is the last thing to tell you.
Which Mr-Glass Models This Applies To

Mr-Glass runs several paver product lines, and the profile, thickness, and joint geometry change between them. That matters because a patched section has to interlock and drain with what’s already down. If you’re replacing a few units, match the exact profile on your existing surface rather than the closest lookalike at the yard. The wrong thickness throws off the plane and creates a lip the edging can’t hold.
Here’s how to identify what you have. Look for the manufacturer stamp or mold mark on the face or the edge of a loose or pulled paver. Measure thickness with a tape – common Mr-Glass paver profiles run in set thickness bands, and that number tells us which line you’re on. Photograph the joint pattern and the border course. That’s usually enough to confirm the model without tearing up the driveway.
On the OEM-versus-aftermarket question for Denton homeowners: a true OEM match is the cleanest route when you’re replacing a handful of units in a visible area, because the color and texture batch carries. A quality aftermarket equivalent is a fair choice when the repair is in an out-of-sight run or when the original line is no longer produced. The compatibility gotcha: color batches age differently. A brand-new OEM paver next to ten-year-old units will read lighter for a full Texas summer before it settles in. We’ll show you both options and the price of each.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. The base beneath has settled or wasn’t compacted to depth. Movement at the surface means the bedding layer has lost contact with the substrate.
- Open, widening joints. Joint sand has washed out and no longer locks the units together. Once the sand is gone, water gets into the base and the decline speeds up.
- Water pooling or draining toward the structure. The slope has flattened or reversed. This is the one with real consequences – water against the slab or garage apron in Denton’s clay soils finds its way in.
- Depressions or ruts in the drive lane. Repeated load over a soft spot. In Denton, expansive clay and long dry spells followed by heavy rain are the usual cause – the subgrade swells, shrinks, and gives.
- Efflorescence or white haze on the surface. Mineral salts drawn up through the paver. Sometimes cosmetic, but paired with movement or open joints it points to water sitting in the base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what a Mr-Glass-compatible repair or replacement runs in Denton. These are installed prices – material and labor together, not a parts-only figure.
| Scope | Installed Price |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves the range: square footage, how deep the failing base has to be opened up, whether the edging and border course need rebuilding, and how accessible the site is for hauling and compaction. A patch that only needs re-sanding and re-leveling lands at the low end. A full tear-out to correct subgrade in Denton’s clay is the high end.
The parts-plus-labor split is written out line by line, not folded into one number. Every completed project carries our 365-Day Done Right Promise – a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge.

DIY or Call Us?
There’s a real split here, so let’s be straight about it. You can safely check things without touching the structure: measure thickness and photograph the joint pattern for identification, sweep sand back into shallow open joints, and note where water collects after a rain. Those are the right owner-level moves, and they help us scope the job over the phone.
The DIY line is at the base. Re-leveling pavers and rebuilding a bedding layer means lifting the surface, digging out and re-compacting the substrate to depth, then resetting and re-sanding – and getting compaction wrong is why so many DIY paver patches sink again the next wet season. That’s how we’d advise anyone in Denton: a driveway that’s already moving underfoot is a base problem, not a surface problem, and it needs proper compaction to hold.
We’re an independent service provider and not affiliated with Mr-Glass. Call (844) 651-3175 and we’ll price the repair honestly before you commit to anything.
FAQs

How long do Mr-Glass pavers last in Denton’s climate? A properly installed paver driveway typically holds 20 to 30 years, but in Denton’s expansive clay that depends on the base, not the paver. The surface outlasts a shallow or poorly compacted install every time. Call (844) 651-3175 for a free site assessment.
Can a failing paver surface be repaired instead of replaced? Often yes. If it’s isolated movement or open joints, a targeted repair – re-leveling, re-sanding, and rebuilding the affected section – is usually the right call and far cheaper than a full replacement. If the base has failed across the whole drive lane, replacement is the honest answer. We’ll tell you which one you’re looking at.
How long does a paver repair or replacement take? A focused repair is typically a day or two. A full driveway replacement runs several days depending on square footage and how much subgrade correction it needs. You’ll get the schedule in writing before we start.
How do you source the replacement parts? We match your existing Mr-Glass profile by thickness and pattern, then quote both the OEM route and a quality aftermarket equivalent with the price of each. You choose. We also install KraftMaid, Cambria, and Silestone on the interior side of the house.
Bradford Remodeling Co Denton works to The Garrison Standard: a written price before work starts, background-checked and uniformed technicians on every job, and a live person answering the phone around the clock. Call (844) 651-3175 for your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












