A Bradford company - serving Denton, TX
An open living room and dining area after a whole-home remodel
T
Therma-Tru · Denton

Therma-Tru Fence Installation in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Fence Installation: The Denton Owner’s Guide

If a component on your Therma-Tru fence system has failed, we replace and reinstall it at a typical installed price of $3,500 to $9,000 in Denton, and most straightforward jobs are completed in a single visit. The price depends on the run length, the gate hardware, and how much of the existing structure can be saved. This page is for owners who already know the brand and need the failing part matched, priced, and set right.

professional kitchen remodeling service in Denton, TX

Call (844) 651-3175

Most Denton owners don’t discover a problem all at once. They notice a gate that drags against the post after a wet spring, a hinge that won’t hold tension, or a post cap that has worked loose above a fence line that’s started leaning. By the time the gate won’t latch without a lift, the part has usually been failing for a season. We’re an independent service provider, not affiliated with Therma-Tru, so we’ll tell you plainly when an OEM part is worth the wait and when a quality equivalent will do the job.

Which Therma-Tru Models This Applies To

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Therma-Tru fence systems and their gate hardware share a compatibility logic that trips up a lot of do-it-yourself buyers: the gate hardware kit is matched to the gate leaf size and the post profile, not to the run length. A hinge set made for a 4-foot gate won’t carry a 5-foot leaf without sagging inside a year, even if the screw pattern lines up. Before we quote anything, we measure the gate leaf, the post thickness, and the hinge spacing on your actual fence, because the spec sheet alone won’t tell us what’s installed.

To identify what you have, look for the manufacturer label on the inside face of a gate stile or on the post cap. It typically lists the series and the gate width. If the label is sun-bleached or gone, which happens fast in Texas heat, a tape measure and a close look at the hinge screw pattern will usually narrow it down. We also check whether the existing hardware is OEM or a previous aftermarket replacement, since mixing the two is where most of the fit problems start.

OEM parts from Therma-Tru carry the exact finish match and the manufacturer’s warranty backing. Quality aftermarket equivalents cost less and often ship faster, but the finish can be a slightly different sheen, and that matters if you’re replacing hardware on a run that’s still perfectly good. Our technicians have up to 22 years of experience with this decision, and we’ll tell you which route fits your fence rather than defaulting to the pricier one.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Fence Installation Is Failing

Not every symptom points to the same part. Here’s what we see most in Denton, and what each one usually means:

  • The gate sags and drags on the ground. This is almost always worn hinge bushings or a post that’s shifted in soft soil after heavy rain. The gate isn’t the problem; the pivot is.
  • The latch won’t catch without lifting the gate. A sagging leaf is pulling the strike plate out of alignment. Left alone, it wears the latch face and the problem gets more expensive.
  • Post caps or finials are loose or missing. Sun and wind work the fasteners loose. Exposed post tops let water into the wood or composite, which is the start of a much bigger repair.
  • Hardware is rusting or the finish is flaking. Standard steel hardware doesn’t hold up to Denton summers and spring storms. Corrosion in a hinge pin seizes the gate.
  • The run is leaning or the posts are wobbly. This is a footing problem, not a hardware problem, and it needs attention before the fence fails completely.

Each of these has a clear cause, and none of them get better with time. If you’re seeing two or more at once, the fence likely needs more than a single part swap.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Therma-Tru fence installation or a hardware replacement with reinstall in Denton, most jobs land between $3,500 and $9,000 installed. Here’s how the range breaks down:

professional kitchen remodeling service in Denton, TX
Scope Typical installed price
Gate hardware replacement and realignment $3,500 – $4,800
Partial run reinstall with new hardware $4,500 – $6,500
Full run reinstall, posts and all $6,500 – $9,000

The price moves on run length, gate leaf count, whether footings need resetting, and whether we’re sourcing OEM or an equivalent part. We give you a written price before any work starts, itemized so you can see the parts and the labor separately, and it doesn’t move at the door. If it’s not done right, our 365-Day Done Right Promise means we come back and correct it at no charge for a full year.

DIY or Call Us?

Some things you can check yourself: tightening a loose post cap, confirming the gate swings free without dragging, and reading the manufacturer label so you know what you’re dealing with. That’s diagnostics, not repair. Where DIY goes wrong is the hinge and post work. A sagging gate is carrying real weight, and pulling hinges off a loaded leaf without bracing it first can drop the gate on you or crack the post. Resetting a footing is a different job entirely and needs the post pulled, the hole redone, and the fence leveled.

We’d rather you call and get a straight price than hurt yourself or make the repair bigger. We answer the phone with a live person, day or night, so call (844) 651-3175 and we’ll tell you what we’re looking at and what it costs.

FAQs

A remodeled hall bathroom with patterned floor tile and painted walls

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch