







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Denton Owner’s Guide
Therma-Tru entry doors and patio systems are typically the door package spec’d on home addition and ADU projects we build in Denton, and a finished addition with a Therma-Tru door runs $45,000 – $130,000 installed, with ADU construction at $90,000 – $220,000. We schedule estimates within a few business days – additions are planned work, so the call you’re making is for a written price, not a same-day dispatch.

Owners usually find us after a door on an existing addition starts failing at the threshold or the slab, not at the panel. You notice daylight under the sweep in February. The door drags on the jamb in August. The multi-point lock on a Therma-Tru fiberglass entry stops catching cleanly because the slab has shifted a fraction on its hinges or the frame has moved with the foundation. In Denton, that movement is almost always soil and moisture, and it’s the same failure pattern we see on additions built on expansive clay.
Key takeaways
- Addition and ADU projects in Denton run $45,000 – $130,000 and $90,000 – $220,000 respectively.
- Therma-Tru doors fail at the threshold, sweep, and lock first – not the panel.
- Denton’s clay soil and humidity drive frame movement; door adjustment often beats replacement.
- Every Bradford project gets a written price before work starts and the 365-Day Done Right Promise.
Which Therma-Tru Models This Applies To

Therma-Tru builds fiberglass and steel entry systems across a few families: the Fiber-Classic and Smooth-Star lines (Smooth-Star is the smooth-skin fiberglass used most on modern additions), the Classic-Craft series for stained-wood looks, and the fiberglass patio and French door systems often spec’d on ADUs and sunrooms. The important compatibility gotcha is that hinge prep, handing (left- or right-hand inswing), and the multi-point lock hardware differ between series and even between finish options within a series. A replacement slab or hardware kit that matches one Fiber-Classic model won’t necessarily drop into a Smooth-Star frame.
Identify your door before ordering anything. Pull the Therma-Tru label off the hinge-side jamb or the top of the slab – it carries the model number, handing, and rough-opening dimensions. If the label is gone, measure the slab width, height, and thickness and photograph the hinge and lock hardware. On the OEM-versus-aftermarket question, Therma-Tru’s own replacement parts are the safe match for locks and hinges; quality aftermarket thresholds and sweeps work fine when the dimensions are right. We specify Therma-Tru on the front end, and for the rest of the project we work from the same documented brand roster – KraftMaid, Cambria, and Silestone among them – so the addition and its door package are traceable to a spec sheet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
- Daylight or a draft at the bottom. The door sweep or threshold has lost its seal, or the slab has dropped slightly on its hinges. In Denton’s summer humidity and winter swings, the sweep wears faster than most homeowners expect – five to seven years is common on a west-facing door.
- The door drags or rubs the jamb. The frame or slab has moved with the soil. Expansive clay under a slab-on-grade addition shifts seasonally, and the door tells you before the drywall does.
- The multi-point or deadbolt won’t catch. Hinge sag or strike-plate misalignment. A fraction of an inch at the hinge translates to a lock that won’t seat, and forcing it rounds the hardware.
- Fogging or water between the glass panes. A failed insulated glass unit. The seal has broken and the unit needs replacement – the panel itself is usually fine.
- Water staining or soft wood at the threshold. The sill pan or flashing detail was wrong when the addition was built. This is the one that compounds into framing damage and is worth opening up sooner rather than later.
Replacement Cost & What’s Included

Door adjustment and hardware on an existing addition usually lands in the $400 – $1,800 range once we’re already on site for other work. Full entry door replacement in a Denton addition runs $2,000 – $6,500 installed, depending on series, glass package, and whether the rough opening needs work. A glass unit swap is typically $600 – $1,500. These are ballpark ranges; the number that matters is the written one we put in front of you before any work starts.
Price drivers: door series and finish, glass package, whether the frame or rough opening is sound, and threshold or flashing repair. Parts and labor are broken out line by line. Every completed job carries the 365-Day Done Right Promise – if the door or the repair fails within a full year, we come back and correct it at no charge. The best way to pin a real number is to have us look at the door and the opening together.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the label and model number, tighten visible hinge screws, test the sweep for daylight, and photograph the lock hardware. What goes wrong for a homeowner is the deeper work. Adjusting a fiberglass slab on its hinges, resetting a frame that’s moved with the soil, or re-flashing a threshold requires the door to come out and be re-squared – and a misadjusted frame is how a $400 fix turns into a $5,000 opening repair. We’d rather do it once and get it right.
Our technicians have up to 22 years of experience, and every crew member who comes to your door is background-checked and in uniform – you know exactly who’s arriving. Bradford Remodeling Co Denton is an independent remodeling contractor and is not affiliated with Therma-Tru. We answer the phone with a live person 24/7. Call (844) 651-3175 to schedule your free estimate in Denton.
FAQs

How long does a Therma-Tru door on an addition last in Denton? Therma-Tru’s fiberglass entry doors carry a limited lifetime warranty on the slab, and in Denton’s climate you can expect 20-plus years from the door itself – but the seals, sweeps, and glass units are wear items that typically need attention every five to ten years. The frame and flashing matter more than the panel. Call (844) 651-3175 for an exact quote – estimates are free.
Can the door be repaired instead of replaced? Often, yes. A dragging door, a lock that won’t catch, or a worn sweep is usually adjustable or serviceable at a fraction of replacement cost – $400 – $1,800 is typical. We’ll tell you plainly if the slab or frame is too far gone to save. Call (844) 651-3175 for an exact quote – estimates are free.
How long does the swap take? Hardware and sweep work is a same-visit job, a couple of hours. A full entry door replacement in an existing addition is usually one day for the door and a second if the rough opening or threshold needs repair. Call (844) 651-3175 for an exact quote – estimates are free.
How do you source the part? We match your model number from the Therma-Tru label to the correct series and handing before anything is ordered, and we spec Therma-Tru doors on new additions so the panel, frame, and hardware are a documented, traceable set. We don’t claim to carry parts on a truck – we source the right one. Call (844) 651-3175 for an exact quote – estimates are free.
Get Your Written Price in Denton
If a Therma-Tru door on your addition or ADU is failing, or you’re planning a new addition and want the door package spec’d right from the start, call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate. You’ll get a written price before any work starts, a background-checked crew, and the 365-Day Done Right Promise on the finished job. We serve Denton and the surrounding area, and a live person answers whenever you call.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












