A Bradford company - serving Denton, TX
A new rear addition with a vaulted beamed ceiling and tall windows
Master Halco · Denton

Master Halco Home Additions & ADU in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A second-story addition that matches the existing roofline
A wide opening with a new beam where the kitchen wall was removed
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled primary suite with built-in wardrobes and a window seat
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Master Halco Home Additions & ADU: The Denton Owner’s Guide

If you’re pricing a Master Halco home addition or ADU in Denton, plan on $45,000 to $130,000 installed. Home additions land in that $45,000 to $130,000 band, attached or detached ADUs run $90,000 to $220,000, and garage conversions sit lower at $30,000 to $80,000. We install Master Halco-compatible additions and ADUs across Denton, and every one starts with a written price before any work begins.

professional general contractor service in Denton, TX

Call (844) 651-3175

Owners usually find the problem the same way. A framed addition that was quoted as “weatherproof” starts showing soft sheathing at the base of a wall after a wet spring. A conversion that passed its first inspection picks up a sticking door and a hairline crack at the drywall corner the next summer. An ADU subpanel trips when the mini-split and the dryer run together. That’s the moment the phone comes out and the real questions start: what failed, what’s it going to cost, and who’s coming back to make it right. This page answers those before you call.

Which Master Halco Models This Applies To

A garage converted into a guest room and home office

Master Halco is best known for fencing, gates and access control, and that matters here. When your project involves a Master Halco gate, automated entry system or security fence tied to a home addition or ADU, the part you’re chasing is often a gate operator, a controller board, a photo-eye set, a keypad or a hinge and latch assembly rather than a “panel” in the structural sense. Matching the right part comes down to the series and the data plate.

Here’s how to identify what you have. Look for the model and serial tag on the operator housing or the control enclosure, not on the gate leaf. Note the gate opening width and the weight of the leaf, because a residential swing operator and a slide operator of the same brand take different arms and different controls. Photograph the tag and the controller board before you call anyone.

The OEM-versus-aftermarket call is where Denton homeowners get burned. For a gate operator on a detached ADU or a gated addition, an aftermarket control board that “fits” the housing can drop a safety photo-eye input or a battery-backup circuit that your original board had. That’s a code and safety problem, not a bargain. For structural parts (headers, framing connectors, sheathing) and finishes, there’s no OEM question at all: the “part” is the spec, and we build to the manufacturer’s published ratings. We’re an independent provider, not affiliated with Master Halco, so we match parts to the tag you show us and we tell you honestly when aftermarket is fine and when it isn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Master Halco Home Additions & ADU Is Failing

For the gate and access side of a Master Halco system:

  • The gate stops mid-travel or reverses for no reason. Usually a misaligned or dirty photo-eye, or a control board that’s lost its limits after a voltage dip. Denton’s summer storm outages reset these more often than people expect.
  • The operator runs but the gate doesn’t move, or the arm binds. A worn hinge, a bent arm, or a leaf that has settled a quarter inch and is now dragging on the ground.
  • The keypad or remote stops working while the gate still opens from inside. A dead receiver module or a keypad that took on water at the post.
  • The manual release won’t budge. A seized release mechanism, which turns a power outage into a locked-in problem. This one is a real safety issue and shouldn’t wait.

For the structural side of the addition or ADU:

  • Soft or spongy sheathing low on a wall, or a musty smell at the base plate. Water getting behind the cladding because a flashing detail was skipped. North Texas wind-driven rain finds every gap.
  • Cracks at drywall corners and doors that stick by late summer. Movement in the foundation or framing, common on Denton’s expansive clay soils as they swell and shrink with our wet-dry swings.
  • An ADU subpanel that trips when appliances run together. An undersized or shared circuit, not a bad breaker. It’s a load problem and it needs a licensed electrician.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A framer checking new wall framing on a home addition

Here’s what Denton owners actually pay, installed, on the projects we handle:

Project Installed Range
Home Addition $45,000 – $130,000
ADU Construction $90,000 – $220,000
Garage Conversion $30,000 – $80,000

What moves the number: square footage, foundation type on Denton’s clay, whether you’re adding a full kitchen or bath (which brings plumbing and electrical), and whether the ADU needs its own utility service and subpanel. A separate structure costs more than a bump-out because it needs its own foundation, roof and service feed.

Every price is written before work starts, broken into line items so you can see parts and labor separately. If the scope doesn’t change, the price doesn’t change. When we hand you the keys, you get a clean site, a documented scope, and the signed 365-Day Done Right Promise in your hand: if the work fails inside that year, we come back and correct it at no charge. That’s The Garrison Standard.

DIY or Call Us?

Some things are safe to check yourself. You can read the data plate and photograph the controller. You can test whether the manual release moves by hand. You can clear debris from a photo-eye lens and confirm the gate isn’t dragging. You can look for soft wood, bubbling paint or a musty smell and note where it is.

Other things need a trained professional, and we’ll say so plainly. Gate operator control boards carry line voltage and store energy even after power is cut; a shock there can stop your heart. The extension spring and the torsion assembly on a swing operator are under real tension and can release violently if handled wrong. And anything structural or electrical in an addition or ADU (framing, foundation, subpanel, rough-in) is permit-and-inspection work. This isn’t a scare tactic. It’s where good intentions turn into a hospital visit or a failed inspection. For those, call us. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed so you know who’s at your gate before they arrive.

Call (844) 651-3175 to schedule your free estimate. A live person answers, 24/7, not a voicemail.

FAQs

A project lead and homeowner reviewing plans in a room under renovation

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA wood double vanity with two mirrors after a bathroom remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch