







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Denton Owner’s Guide
Kitchen remodeling projects in Denton run $14,000 – $45,000 installed, and we schedule them around your timeline, not a same-day pitch. When we talk about an Ameristar “part” on a kitchen, we mean the components that carry or finish a load: cabinet boxes and drawer hardware, surface edge profiles, and the fastener and substrate details behind them. Owners usually find the problem the day a door stops closing flush, a surface edge lifts at the seam, or a drawer that used to glide starts to sag and rub.

Key Takeaways
- Typical Denton kitchen remodel: $14,000 – $45,000, priced in writing before work starts.
- We’re an independent contractor. We’re not affiliated with Ameristar.
- Every completed project carries the 365-Day Done Right Promise.
Which Ameristar Models This Applies To

Ameristar cabinet products are built on the standard frameless and face-frame box systems, so the practical question isn’t “which model” so much as “which box, which door front, and which profile.” Ten-year-old Ameristar box construction differs from current production in hinge boring patterns and drawer-glide mounting, which is where most retrofit headaches start. If a replacement door or front has to match an older run, the offset dimensions have to be measured, not guessed. We measure the door overlay, the hinge cup spacing, and the drawer-box height at the job site before we order anything.
On countertops, Ameristar profiles change with the series: bullnose and eased edges were common on older runs, while current styles trend to square and bevel. The seam and edge you order has to match the adjoining front or the joint shows. You’ll find the product line and door style on the label inside the cabinet door or under the drawer box. Read those labels before you call, and we can usually identify the right part in one conversation. OEM-equivalent components are the safer choice when a match to the existing run matters more than a few dollars in price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors that rub or stick. Usually worn hinges or a box that’s racked slightly out of square, which shows up more in Denton’s summer humidity when the box swells.
- Drawers that pull off track or sag. Worn or overloaded drawer glides, or a mounting rail that lost bite in the particleboard box.
- Edge profile lifting or chipping. The edge banding or surface edge is failing, which lets moisture into the core and spreads the damage.
- Seams or joints opening at the countertop or backsplash. Shifting cabinets or failed adhesive under a stone or quartz top. Left alone, a seam can widen into a crack.
- Soft, mushy spots in the box near the sink. Water intrusion soaked into the substrate. The box has started to fail, and replacement is usually the sound call.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Ameristar kitchen work in Denton falls in a written range, and every quote is itemized before the first tool comes out:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with box count, door style, material grade, and whether plumbing or electrical has to move. Parts and labor are broken out line by line. The finished work carries the 365-Day Done Right Promise: if a drawer sags or a seam opens within a year, we come back and correct it at no charge.

DIY or Call Us?
You can safely open cabinets, measure, read labels, and swap a standard drawer glide or hinge if you’re handy. What goes wrong on DIY is mis-matching the part: a glide with the wrong screw spacing, a hinge cup off by a few millimeters, or a new edge fitted over a substrate that’s already swollen. The symptom comes back in a season. We confirm the exact Ameristar spec at the site, order the part that fits, and install it so the match holds. If a box is water-damaged or a stone top is unsupported, that’s a job for a trained installer. Call (844) 651-3175 for a free estimate in Denton.
FAQs

Hardware glides and hinges typically run 8 – 15 years with normal use. Boxes last longer if the seal holds, but Denton’s humid summers and dry winters work on the wood, which is why hardware goes first. Call (844) 651-3175 for a free estimate.
Sometimes. A hinge swap or a re-set drawer glide is fast and inexpensive. A swollen substrate or a cracked stone edge usually needs replacement. We tell you which one it is up front. Call (844) 651-3175.
A single hardware or edge repair is often a half-day. A full cabinet or countertop install runs one to several days depending on scope. We confirm the timeline in writing before we start. Call (844) 651-3175 for a free estimate.
We identify your Ameristar line from the labels and measurements, then order from manufacturers with documented specs. We also work with KraftMaid, Cambria, and Silestone where the spec calls for it. The price is set in writing before the order goes out. Call (844) 651-3175.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.
Call (844) 651-3175 to schedule your free estimate. We answer the phone with a live person, put the price in writing before any work starts, and back every completed project with the 365-Day Done Right Promise.












