A Bradford company - serving Denton, TX
An open living room and dining area after a whole-home remodel
Oldcastle · Denton

Oldcastle Fence Installation in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Fence Installation: The Denton Owner’s Guide

Oldcastle fence installation in Denton typically runs $3500 – $9000 for a residential yard, with most of that spread coming down to linear footage, material line, and how much old fence and footing work has to come out first. If you’re pricing a repair rather than a full run, we quote that separately, and every number is a written price before any work starts.

General contractors carrying drywall panels on a residential construction site in Denton, TX

Call (844) 651-3175

Owners usually find us after a wind event, not before. In Denton, a spring squall line rolls through and one section of the old fence is leaning into the neighbor’s yard, or the gate drags and won’t latch, or a post has pulled loose from the concrete at the ground line. By the time you’re standing in the alley looking at it, the question isn’t whether it failed; it’s which part failed and whether it’s worth saving.

One thing to state plainly up front: Bradford Remodeling Co Denton is an independent contractor. We’re not Oldcastle, and we’re not affiliated with Oldcastle. We install Oldcastle fence systems and compatible components because they’re a documented, spec-traceable material line.

Key Takeaways

  • Installed Oldcastle fence runs $3500 – $9000 in Denton for most residential lots.
  • Vinyl fence falls in that same band at $3500 – $9000; aluminum runs $4000 – $10000.
  • Your written price is fixed before any work starts. The number doesn’t move at the door.
  • The 365-Day Done Right Promise covers the completed install for a full year. If the work fails in that window, we come back and correct it at no charge.

Which Oldcastle Models This Applies To

A remodeled family room with new windows and a window seat

Oldcastle’s fence line covers vinyl privacy, semi-privacy, aluminum ornamental, and composite profiles, sold through building supply channels rather than a single model number stamped on a post. That’s the first compatibility gotcha: you won’t find one clean “model” label the way you would on a garage door opener. What you’ll find is a profile name on the packaging or the supplier’s spec sheet, and the actual spec is the fence height, the rail spacing, the picket width, and the post size.

So the identification method we use is measurement, not model-chasing. Pull four numbers: overall fence height in inches, rail spacing from center to center, picket or panel width, and post dimension. For most residential vinyl privacy lines those are 48″, 60″, or 72″ high with 2″ x 3.5″ or 5″ x 5″ posts. Bring those numbers in and matching the correct panel, post cap, or rail end is a clean job. Guess at it and you’ll drive to three suppliers in Denton before you find the right picket cap.

On the OEM-vs-aftermarket call: for structural pieces (rails, pickets, posts, gate hardware) stay with the manufacturer’s matching line, because mixing a 2″ x 3.5″ rail from one profile into a 5″ post system changes the load path and voids the material warranty. For cosmetic bits (caps, brackets, trim) a quality aftermarket equivalent is fine and often cheaper. We carry no parts on our trucks and we don’t stock inventory. What we do is source from a documented supplier roster, order against your measured spec, and put the material make and spec on your written quote so it’s traceable.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Fence Installation Is Failing

Denton weather does specific damage to a fence, and the symptom usually points at the cause. Here’s what to look for:

  • The gate drags or won’t latch. A gate that’s been fine for years suddenly scraping means a hinge post has lost its footing, either from soil movement after heavy clay-soil saturation or from a post that was set too shallow in the first place.
  • One section is leaning, the rest is straight. That’s almost always a single post, not a fence failure. Getting a diagonal brace on it quickly keeps the rail joinery from pulling apart and turning a post repair into a full panel replacement.
  • Pickets cracking or becoming brittle along the bottom. UV exposure in Texas summer sun breaks down vinyl over time. A south or west-facing run will always go first on a Denton yard.
  • Posts wobbling in the concrete collar. If the concrete is cracked or the post is loose in the collar, the footing has shifted. A wobbly post under a loaded gate will fail completely and drop the gate, which is the point where safety matters, not just looks.
  • Rails pulling out of a post or pickets sliding. That’s usually a mixing problem: the wrong rail profile fitted into a different post pocket, or fastening that was never rated for the load. It looks like a small fix until one wind gust takes the whole panel.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Installed Oldcastle fence in Denton lands at $3500 – $9000 for a typical residential run. Vinyl fence installs at $3500 – $9000. If you’re going aluminum ornamental, the band is $4000 – $10000. A part-only repair (a hinge post, a section of rail, a gate rehang) sits well below those bands and is quoted as its own line item.

What drives the range: linear footage, fence height, post density, old material removal and disposal, and whether post holes hit the hard Edwards limestone seams that run through parts of Denton. Footer depth matters, and we spec it on paper before we dig, not on the fly. Every quote is line-itemed: material, labor, removal, and disposal, each with its own number. Our technicians have up to 22 years of experience, and every completed install carries the 365-Day Done Right Promise. If the work fails within a year, we return and correct it at no charge.

DIY or Call Us?

What you can safely do yourself: measure your fence height, rail spacing, picket width, and post size to establish the right replacement spec. Check gate hardware for loose screws. Look at whether the concrete at each post is cracked or the post moves in the collar. That’s all useful information, and it makes any quote you get more accurate.

Where DIY goes wrong on a fence is the post footing. The most common failure we see isn’t the panel; it’s a shallow post that seemed solid on a dry day and then moves after a wet week. A loaded gate on a moving post can fall on a person or a pet. That post needs to be dug, set, and cured correctly the first time.

Call Bradford at (844) 651-3175 for a free estimate on your Oldcastle fence project.

FAQs

A walk-in shower with large-format tile and a built-in niche

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patio

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch