







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Home Additions & ADU: The Denton Owner’s Guide
If you’re building a home addition or ADU in Denton and want to use Quikrete concrete mixes for the slab, footings, or structural pours, plan on a project range of $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached ADU. Concrete is one piece of a larger structural build, and the mix you choose matters more in Denton than most homeowners realize. Quikrete’s standard high-strength mix is a workhorse, but it’s not the right product for every pour in a North Texas project.

Most Denton owners end up researching this because something already went sideways: a slab cracked within two years, footings that didn’t cure evenly in a dry August, or a contractor who used a general-purpose mix where a high-early-strength product was actually spec’d. The concrete is often the first thing that fails and the last thing anyone wants to tear out. Getting the spec right before the pour is the whole game.
We install additions and ADUs on Quikrete-specified foundations every week, and we install them to the manufacturer’s mix standards, not to guesswork. Bradford Remodeling Co Denton is an independent contractor, not affiliated with Quikrete.
Which Quikrete Models This Applies To

“Quikrete” isn’t one product. It’s a family of mixes, and the right one depends entirely on what you’re pouring. For an addition or ADU in Denton, you’re generally choosing between Quikrete High Strength Concrete Mix (the green-and-white bag), Quikrete Concrete Mix (the yellow bag, for general structural pours), Quikrete 5000 (for higher-psi structural work), and Quikrete Fast-Setting Concrete Mix (for post holes and footings where you can’t wait for cure). Each has a different strength rating, and mixing them up means you’re under-spec’d or over-spending.
How to identify what you’re working with: check the bag’s psi rating (High Strength is typically 4000 psi; 5000 is engineered for heavier loads), the mix yield (each 80-lb bag yields a known volume of mixed concrete, and you need to calculate yardage against that number, not against raw bag weight), and the cure window printed on the back. In Denton’s July and August heat, that cure window shortens dramatically because ambient temperature affects hydration.
OEM vs. aftermarket here means Quikrete mix versus a competing bagged concrete or a ready-mix truck from a Redi-Mix supplier. For large ADU slabs, ready-mix is usually the better call on volume alone. For smaller footings, post holes, or patched pours, Quikrete bagged mix is the right tool. We spec the specific Quikrete product by name and psi rating in the written scope so it’s traceable, and we hold it to The Garrison Standard. If you’re weighing materials choices, KraftMaid, Cambria, and Silestone come up on the finish side of these projects; concrete is the foundation side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Home Additions & ADU Is Failing
Concrete failure is rarely sudden. It telegraphs. Here’s what a failing foundation or slab actually looks like in a Denton addition or ADU:
- Hairline cracks spreading more than 1/8 inch wide within two years of the pour. Usually a sign the mix was under-strength for the load, or that the slab wasn’t properly reinforced with control joints. North Texas clay soil moves enough that an under-spec’d slab doesn’t survive a wet spring-dry summer cycle.
- Perimeter footings sinking unevenly on one corner. Almost always differential settlement from pouring on inadequately compacted soil, common in newer Denton subdivisions where the fill wasn’t allowed to settle long enough before construction. The concrete didn’t fail; the ground under it did.
- Powdering or chalky surface on the slab or driveway apron. A finishing problem, not a mix problem. Concrete finished too wet, or worked too late, loses surface integrity and dusts under foot over time. It’s a symptom of rushed pour-day work.
- Efflorescence (white salt staining) on foundation walls you didn’t have before. Occasionally cosmetic, but persistent bloom means moisture is migrating through the concrete, which points to a mix ratio problem or missing vapor barrier. In Denton’s humidity, this one’s worth a look.
- Spalling or flaking near the surface. Water entrapment at the surface during cure, often because the pour happened in the early morning when temperatures were below spec, or because someone hosed the slab down to slow the cure without proper curing blankets. It looks like cosmetic pockmarking at first and grinds into structural concern over five to ten years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for home additions and ADUs in Denton:
| Project | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion (alternative to full ADU) | $30,000 – $80,000 |
Range drivers: square footage, foundation type (slab-on-grade vs. pier-and-beam, which matters on Denton’s clay), whether utilities need a full re-route, whether you need a separate meter for the ADU, permit fees (Denton requires permits for both structural additions and ADU construction, and we pull them), and finish level. Concrete material is typically 6-10% of the total; the rest is framing, mechanicals, and finish.
Every quoted price is written before any work starts, no change orders at the door. Every completed project is covered by the 365-Day Done Right Promise, which means if the concrete slab or any part of the work fails within twelve months of completion, we come back and correct it at no charge. We don’t carry an inventory of Quikrete products on any truck; we source materials for your specific pour spec.
DIY or Call Us?
Homeowners can safely handle: bag math for a small Quikrete order, checking the psi rating against the spec sheet, measuring form dimensions, and asking whether the soil under a slab has been compacted and tested. That’s scoping work, and doing it well saves money.
Where it goes wrong: slab pours over 100 square feet, footing set for any loadbearing wall, and any pour where Quikrete product selection depends on mix-strength engineering. A home addition or ADU sits on top of this slab for the rest of the house’s life. A pour that’s under-spec’d, over-watered, or cured at the wrong temperature isn’t a mess you fix with patching compound; it’s a slab that fails within five years and takes your framing with it. That’s an expensive redo. If you’ve got a failed pour or you’re planning one, call us before the bags get wet.
Call (844) 651-3175 to schedule your free estimate. Every price we quote is in writing first. We answer the phone live, 24/7, not a voicemail.
FAQs

Thirty to fifty years if it’s poured to the right psi for the load, reinforced correctly, and cured in the right temperature window. The failure point on most Denton slabs is not the Quikrete product itself, it’s the soil prep and cure control. Our technicians have up to 22 years of experience on North Texas foundations and spec the pour accordingly. Call (844) 651-3175 for an exact quote on your project.
Sometimes. Hairline cracks under 1/8 inch can be sealed and monitored. Slabs with significant settlement, spalling, or load-bearing compromise usually need a partial or full replacement, and repair costs approach replacement costs on a large pour. We’ll tell you which side of that line you’re on in plain terms. Call for an honest assessment.
A home addition in Denton typically runs 3 – 5 months from permit to close; an ADU runs 5 – 8 months. The foundation pour is usually a week or two of that, but it’s the piece that sets the schedule for everything after. Rushing the pour doesn’t save the schedule; it buys a redo. Call (844) 651-3175 for a scoped timeline on your project.
We spec by product name and psi rating against the structural plan, verify bag yield against required yardage, and confirm the mix meets the load requirement before the pour date. No Quikrete product is stocked on our trucks; materials are ordered for the specific job. Every spec is written into the scope, and every completed foundation carries the 365-Day Done Right Promise. Call for the full written estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












