







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Home Additions & ADU: The Denton Owner’s Guide
Home additions and ADU work in Denton falls in the $45,000 to $130,000 range, with ADU construction running $90,000 to $220,000 depending on size, foundation type, and utility tie-ins. Sakrete is a mortar and concrete brand, so the “Sakrete part” on an addition is the structural concrete and mortar work: footings, slabs, stem walls, pier pads, and the bed joints that hold block and brick together. When that mix fails, you find it as a hairline crack spreading across a slab, a footing that has settled and pulled the wall above it out of plumb, or mortar that crumbles when you drag a key across it. Bradford Remodeling Co Denton is an independent contractor and is not affiliated with Sakrete.

Key Takeaways
- Addition pricing in Denton runs $45,000 – $130,000; ADUs run $90,000 – $220,000.
- Most “Sakrete failures” are placement or curing mistakes, not bad product.
- We install to manufacturer spec and give you the written price before work starts.
- Every project carries the 365-Day Done Right Promise in writing.
Which Sakrete Models This Applies To

Sakrete isn’t a machine with a serial number. It’s a family of bagged mixes, and the “model” that matters on an addition is the mix designation on the bag: High-Strength Concrete Mix (roughly 4,000 psi at 28 days when mixed right), Crack-Resistant Concrete, Sand Mix and Topping Mix for thin repairs, Type S Mortar Mix for block and brick bed joints, and the fast-setting varieties meant for post holes and small pads. Grab a failed bag or an old receipt and the label tells you what you’re matching. If the bag is gone, the structural drawings or the original permit set will name the mix.
Here’s the compatibility gotcha that trips up Denton homeowners: fast-setting post-hole mixes and the 4,000 psi structural mix are not interchangeable. We regularly see a DIY pad poured with fast-set that cracked through its first summer because it wasn’t meant for a loaded slab. On the OEM-versus-aftermarket question, Sakrete is itself a retail brand, so a “genuine” bag is just the bag. What matters is meeting the specified psi and getting the water ratio right. Quikrete and regional equivalents can hit the same spec if the mix design matches. We work from a documented roster of name-brand materials so the specification is traceable, the same way we specify KraftMaid, Cambria, and Silestone on the interior side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Home Additions & ADU Is Failing
- Cracks wider than a credit card. Shrinkage cracks are normal and narrow. Wider cracks usually mean too much water in the mix at pour time, which cuts strength and lets the slab move.
- Crumbling mortar joints. If a key or screwdriver gouges the mortar between block or brick, the mix was too lean or cured too fast in the heat. Denton summers punish wet mortar that isn’t kept damp.
- Footings that settled. A floor that slopes or a door that sticks at the top can trace back to a footing poured on unprepared soil. North Texas clay expands and contracts hard with our wet-dry cycles.
- White chalky bloom on the surface. Efflorescence is salt pushed out by moisture moving through the concrete. It can be cosmetic, or it can signal water getting in where it shouldn’t.
- Hollow sounds when you tap a slab. A dull, hollow thud can mean the concrete has separated from the subgrade underneath, often from a pour over soft or uncompacted soil.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like for Denton, with the lead range for a full addition at $45,000 – $130,000 and an ADU at $90,000 – $220,000. Those ranges include demolition of failed concrete, footing and slab work, framing, finishes, permits, and inspections. What pushes you toward the top: pier-and-beam foundations on Denton’s clay, utility reroutes, and larger footprints. What pulls it down: a simple slab-on-grade bump-out with existing utilities nearby.
We give you a written, line-item price before any work starts, no exceptions. That’s The Garrison Standard. The price on the page is the price at the door. No change orders that appear after the crew is on site unless you approve them in writing first. Every completed addition and ADU carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: look at crack width with a straightedge, tap a slab to listen for hollow spots, check whether doors and windows still close square, and look for efflorescence at the base of walls. Where DIY goes wrong is the structural work itself. Pouring a footing or a loaded slab with the wrong mix, skipping subgrade compaction, or curing in 100-degree Denton heat without keeping the concrete damp can leave you with a failure that costs far more to undo than to do right the first time. Concrete is unforgiving once it sets. This part of the job belongs to a trained professional.
Our technicians have up to 22 years of experience, and they’re background-checked and uniformed, so you know who’s on your property. Call (844) 651-3175 for a free estimate. A live person answers, 24 hours a day, seven days a week.
FAQs

A properly mixed and cured structural slab or footing should last decades, often 50 years or more. In Denton’s clay soil and heat, the mix and curing matter most: too much water or rapid drying can shorten that lifespan significantly.
Sometimes. Narrow cosmetic cracks can be sealed, and minor settling can be stabilized with underpinning or mudjacking if it’s caught early. A footing that has failed structurally or a slab that’s separated from the subgrade usually needs replacement. We’ll tell you which one you’re looking at, in writing, before any work starts. Call (844) 651-3175 for a free estimate.
A small footing or pier pad replacement can be a few days, while a full slab or foundation repair on an addition takes one to three weeks depending on access and cure time. ADU foundation work runs longer because of the utility tie-ins and inspections.
We work from a documented roster of name-brand materials so every spec is traceable, and we match the mix design to the structural drawings, not to whatever’s on sale. You get the written price and the material spec before a single bag is opened. Call (844) 651-3175 for a free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












