







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Denton Owner’s Guide
Fence installation with ActiveYards materials in Denton typically runs $3,500 – $9,000 installed, and we schedule most projects within a week or two of the written estimate. You’re probably reading this because a post is leaning, a gate drags or won’t latch, or a panel section sagged after the last freeze-thaw cycle. Most ActiveYards failures we see in Denton County come from the same handful of causes: undersized posts, a gate hinge side that took the wind load, or a section set over soil that moved. This is a planning document, not a next-day emergency call. Fence installs aren’t same-day work. We give you the number in writing, then we build it right.

Bradford Remodeling Co Denton is an independent contractor. We don’t manufacture or sell ActiveYards products and we aren’t affiliated with the brand. What we do is install ActiveYards-compatible fencing from the written price, with a full-year guarantee on the work.
Which ActiveYards Models This Applies To

ActiveYards sells through dealer networks and builders, so the product line you have depends on when it was installed. The common categories we run into across Denton are vinyl privacy panels, vinyl picket runs, ornamental aluminum, and the related gate hardware and post systems. Before we write anything, we identify what’s actually there. Look for a manufacturer label or sticker on a post or panel rail. If there isn’t one, we take measurements at the rail, the post, and the gate opening, because panel dimensions aren’t universal across lines.
Here’s the compatibility gotcha that bites people: two fences can look identical and still use different rail profiles, and a replacement panel from the wrong line won’t seat in the existing post channel. A gate hinge assembly that fits one system may put stress on the post on another. We match to the existing system rather than forcing a part to fit, and when a manufacturer part is discontinued, we tell you honestly whether an aftermarket equivalent is the right call or whether a short section needs a fresh rebuild.
The OEM-versus-aftermarket question has a straight answer. For structural pieces like posts, rails, and hinges, match the original manufacturer whenever it’s available. They carry the load. For aesthetic parts, a quality aftermarket piece can be indistinguishable on the fence line. The only person who benefits from a mismatched part is the person who sold it to you. We don’t carry parts on a truck, and we don’t claim to. We source the right part for the job and say so before we order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Fence Installation Is Failing
- Posts leaning after heavy rain. Since ActiveYards vinyl is often set in concrete in this area, a post that leans usually points to a footing that was too shallow or soil that’s too wet during the pour. It holds until the first big rain and then tips.
- Gate dragging or dragging the ground. That gate started as a friend and turned into an opponent. A dragging gate almost always means a hinge plate loosened or a gate post settled. Wind load on a wide gate is the hardest force a fence carries, and the hinge side takes most of it.
- Panels bowing or rails working loose. Vinyl expands and contracts with the Texas heat. If the rails were cut too tight, the panel has nowhere to move, and the plastic around the rail grinds, cracks, or pops.
- Visible cracks in posts or rail joints. Early cracks usually come from impact or from hardware over-tightened at install. A hairline now becomes a gap by the next season if you don’t get it earlier.
- A wobbly section after a freeze. Denton gets freeze-thaw cycles that push up on shallow footings. The section looks fine until it isn’t. We see this most on runs installed near grade with no drain path.
Replacement Cost & What’s Included

An ActiveYards installation or replacement in Denton runs $3,500 – $9,000 installed. The range is driven by linear feet, fence height, gate count, and what’s under the ground. A long run over solid soil is a different job than a short run over fill or a tight property line where the crew has to work around landscaping and a neighbor’s survey.
| Line item | Installed range |
|---|---|
| Vinyl fence installation (ActiveYards-compatible) | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Gate and hardware replacement (per gate) | Quoted separately, part of the line-item price |
What’s included is simple: parts, labor, footings, haul-away of the old material, and a written price before any work starts. We don’t do surprise numbers at the door. And every completed project carries the 365-Day Done Right Promise. If the work fails within the guarantee period, we return and correct it at no charge. That’s the whole deal. The written price is what you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely pull the label off a post, snap a photo of the damage, measure the gate opening, and check a post for play with a firm push. All of that helps us match the part. What gets people into trouble is digging up footings, resetting a gate post, or assuming a replacement panel will fit a channel it was never made for. The weight and tension in a fence section are real, and a gate that looks solid can drop on a foot if the hinge side fails. If the post is moving or the gate is dragging, call us. We’ll walk you through what’s likely wrong over the phone and give you a free estimate. Call (844) 651-3175.
FAQs

How long does ActiveYards fencing typically last in Denton? Most vinyl systems hold up around 20 years or more when the footings were set properly, with the caveat that Texas heat and our freeze-thaw cycles are what stretch or crack wind-loaded panels first. Gates and hardware are the parts that wear out sooner. Call (844) 651-3175 for an honest read on whether you’re looking at a repair or a replacement.
Can I repair the failed section instead of replacing the whole fence? Often yes, and that’s our first choice. If the failure is isolated to one panel, a gate, or a post footing, we quote the small job rather than pushing a full replacement. If the base was the problem, a partial repair just moves the failure down the line. Call (844) 651-3175 and we’ll tell you which one you have.
How long does the swap take? A single gate or panel repair is usually a short visit. A full run is scheduled across the agreed days and we give you those dates in the written estimate before we start. Call (844) 651-3175 for a real timeline on your property.
How do you source the right part for my model? We identify the system from the label, or from measurements at the rail, post, and gate, then quote the correct part and the install labor together. We don’t promise same-day parts and we don’t carry ActiveYards stock on trucks. If a part is discontinued, we tell you upfront. Call (844) 651-3175 for a free estimate. We also install KraftMaid, Cambria, and Silestone products on other projects.
Get a Written Price Before Anyone Touches the Fence
Bradford Remodeling Co Denton writes the price before the work starts, every time. Our technicians have up to 22 years of experience, and our crews are background-checked and uniformed, so you know who’s on your property before they arrive. A live person answers the phone 24/7. The Garrison Standard is why we tell you the number first and the guarantee before the truck shows up. Call (844) 651-3175 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












