







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Denton Owner’s Guide
We build Blanco-compatible home additions and ADU projects in Denton, and the installed numbers usually land between $45,000 and $130,000 depending on footprint, foundation, and how much of the existing structure gets disturbed. ADUs on their own run $90,000 to $220,000. That’s the range before anything is ordered, and we’ll put it in writing before a tool comes out.

Owners rarely call us because a plan looks wrong on paper. They call because something in the finished shell is telling them it’s failing: a ceiling stain that keeps returning, a door that stopped latching square, a bathroom wall that stays cold in January, a floor that’s gone hollow underfoot. Blanco is a specification brand in kitchen and bath work, so when a Blanco-specified fixture or finish is part of the build, the failure usually shows up where the specialty trade meets the structure, not in the fixture itself. That’s the part we diagnose first.
Which Blanco Models This Applies To

Blanco’s residential line is built around kitchen sinks and faucets more than additions, so the honest answer is this: on an addition or ADU page, “Blanco” refers to the specified kitchen and bath package you’re building around, not to a part number on the framing. The Blanco sink you’re holding almost certainly comes from the undermount stainless families (Diamond, Quatrus, Formera) or the fireclay and granite composite lines (Ikon, Precis, Valea), and each family has its own cabinet opening and mounting requirement. Get the model off the sticker on the sink’s underside or the stamp on the drain flange. If the sticker’s gone, measure the bowl depth and the cabinet opening and match to the current spec sheet.
On the OEM-versus-aftermarket question: Blanco’s own mounting clips, drains, and flange kits are the safe call for a fireclay or composite sink because the tolerances are tight and a generic clip set can crack a fireclay rim during the first tightening. For stainless undermounts, a quality aftermarket undermount clip system from a name-brand source is fine, and we specify from a documented roster (KraftMaid, Cambria, Silestone, Moen, Kohler) so the sink matches the countertop cut and the fixture warranty stays intact. We do not carry parts and we don’t stock Blanco inventory. What we do is order the correct part against your model number and install it to spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
Most of what we’re asked to correct in Denton traces back to the intersection of the Blanco-specified kitchen or bath and the addition’s structure. Five real signals:
- Recurring ceiling stain under the new bath rough-in. Water tracking along a poorly seated fixture or a shower valve set without proper slope. Blanco-specified shower trim is unforgiving of an out-of-plumb rough-in, so the leak shows at the ceiling before it shows at the valve.
- Floor feels hollow at the sink cabinet. The subfloor under the kitchen sink wasn’t sealed against splash, and North Texas clay soil movement plus a slow drip has softened the substrate. A $4,000 to $13,000 cabinet replacement starts here if it’s left too long.
- Door won’t latch square in a new room. Foundation movement or a header that’s shrunk. Denton’s expansive clay is the usual culprit; a door that closes clean in October and drags in August is a foundation conversation, not a hardware one.
- Wall stays cold behind the Blanco sink. Insulation was skipped behind the cabinet, common in garage conversions and ADUs where the wall was formerly exterior. It reads as “drafty” but it’s a missing batt.
- Grout cracking around the Blanco fireclay sink rim. Fireclay expands and contracts differently than the surrounding tile, and rigid grout will crack. That’s a flexible-sealant problem, and it’s why we specify the correct mount and sealant, not just the sink.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
These are installed ranges, parts and labor together, not a parts-only figure. The part itself is a small line; the labor and the corrected substrate is the number that matters.

| Scope | Denton installed range |
|---|---|
| Home addition (full scope) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Kitchen remodel within the addition | $14,000 – $45,000 |
| Bathroom remodel within the addition | $9,000 – $28,000 |
What moves the number: foundation type on Denton clay, whether the addition ties into existing framing, and how far the Blanco-specified kitchen or bath package runs from the standard spec. Every quote is line-itemed and written before work starts, the price doesn’t move at the door, and every completed project carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check: the model number on the Blanco sink or faucet, the condition of the caulk and sealant around the sink rim, and whether that ceiling stain is currently wet with a fingertip test. What you shouldn’t take on: the rough-in and finish work on plumbing, the structural tie-in of an addition, and any work that touches gas or the electrical panel. Those are permit-and-inspection items in Denton, not weekend projects, and a failed inspection or a hidden leak inside a new wall costs far more than the original call.
If a Blanco part has failed or is failing and you’re not sure where the blame lands, call (844) 651-3175. We’ll get a technician out, identify what actually failed, and give you a written price before anything’s ordered.
FAQs

A Blanco undermount or fireclay sink itself should last 15 to 25 years, and the faucet cartridge 8 to 12. What fails sooner is the installation: a sink mounted without a proper sealant on this climate’s temperature swings shows failure at the rim in 3 to 7 years if the original spec was rushed. Call (844) 651-3175 for an exact assessment.
Sometimes. A cracked fireclay rim cannot be repaired, but a leaking faucet cartridge, a failed undermount clip, or a bad drain flange can all be corrected without replacing the sink. We diagnose first and quote the repair before quoting a replacement, so you’re not paying for a new sink you didn’t need. Estimates are free – call (844) 651-3175.
A sink or fixture swap in a finished kitchen is usually a one-day job for the part itself. If the failed part damaged the substrate or cabinetry, expect 2 to 5 days including the cabinet repair and the sealant cure. An addition’s Blanco package throughout typically installs over the last 1 to 2 weeks of the build. Call for a schedule against your specific scope.
We order against your specific Blanco model number from documented suppliers, and we don’t claim to stock parts or carry them on a truck. Every part is traceable to a manufacturer spec, which matters because the 365-Day Done Right Promise only means something when the part itself carries a manufacturer warranty behind it. Call (844) 651-3175 to start with a written estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












