







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Denton Owner’s Guide
If you have Boral roofing on your Denton home, the work we do is matching the right Boral-compatible component to your existing roof and installing it to spec. Most Boral-related calls in Denton are roof repairs priced between $400 and $1,800, with full roof replacement running $8,000 to $20,000 depending on roof size, pitch, and material. Boral roofing itself isn’t the failure most owners call about – the failure is usually in the flashings, fasteners, or ridge components around it. We give you a written price before any work starts, and every job is backed by the 365-Day Done Right Promise.

Owners usually find out something’s wrong after a hard North Texas storm, when a dark stain shows up on a ceiling, or when a roofer walking the roof points out a lifted Boral tile on the south slope. Bradford Remodeling Co Denton is an independent service provider and is not affiliated with Boral.
Which Boral Models This Applies To

Boral makes clay and concrete roof tile, and Denton homes carry a range of those product lines – from the lighter, lower-profile concrete tiles to heavier clay barrel profiles. The exact model matters because tile dimensions, profile height, and side-lap widths change how a replacement piece interlocks with what’s already on your roof. Mixing profiles creates water paths that aren’t visible from the ground.
Here’s how to identify your tile before we quote:
- Pull the model from the original build or roofing paperwork. If the home was built with Boral, the spec sheet or a roofer’s invoice often lists the product line by name.
- Measure the exposed course. That’s the visible height of one tile course where it overlaps the next. It’s the single most useful number for matching a replacement.
- Check the underside for stamps or marks. Many Boral tiles carry a manufacturer stamp on the back that tells us the line and profile.
On the OEM-versus-aftermarket call: for Boral specifically, matching the exact profile and finish matters more than the “replacement” label on the box. An aftermarket tile with a close-but-not-identical profile will sit differently and can void the surrounding roof’s water performance. We work from a documented roster of name-brand materials – including GAF and CertainTeed roofing alongside Boral-compatible components – so specs are traceable. We also handle KraftMaid, Cambria, and Silestone on the interior side for homeowners doing more than roofing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile itself is durable. What fails around it is fasteners, underlayment, and flashings, and North Texas heat and hail speed that up. Here’s what to look for:
- Dark stains on interior ceilings or attic decking. This means water is getting past the underlayment, usually at a flashing point or a cracked tile, not the tile face itself.
- Cracked or chipped tiles after a hail event. Denton sits in a hail belt; a single storm can hairline-crack tiles that look fine from the driveway but leak at the next heavy rain.
- Lifted or misaligned tiles along a ridge or valley. This usually points to failed fasteners or a shifted batten, and it gets worse with every thermal cycle through a Texas summer.
- Visible rust or popped nails on the fastening line. Fastener failure is the most common root cause we see, and it’s invisible until a tile slips.
- Granule or finish loss on concrete tiles. Surface wear exposes the tile body and shortens life; on a 20-30 year concrete tile in full Denton sun, this is where the clock starts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Boral-compatible roof repair in Denton runs $400 to $1,800 installed, depending on how many tiles are involved and whether underlayment or flashing has to come up. Here’s what drives the range:

- Tile count and access. A ridge repair is quick; a valley repair means lifting a run of tiles.
- Underlayment replacement. If the deck or felt underneath is wet, it comes out, and that adds labor.
- Flashing rework. Chimney, vent, and valley flashings are the usual leak points.
- Full roof replacement, if the damage is broad. $8,000 to $20,000 for a whole Boral roof, sized to your home.
Parts-plus-labor is shown as line items, and you get a written price before any work starts. Every repair carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check: interior ceiling stains, attic decking moisture, and from the ground, any obviously slipped or cracked tile. Take photos of anything that looks off. What you should not do is walk a tile roof or lift tiles yourself. Boral tile is heavy, brittle underfoot, and a fall from a Denton roofline is a serious injury. Broken tiles from an amateur repair are also the most common cause of a second leak we’re called out to fix.
If you see interior staining after a storm, the roof needs a professional look. Call Bradford Remodeling Co Denton at (844) 651-3175 and we’ll schedule a free estimate, give you a written price, and tell you honestly whether it’s a repair or a replacement.
FAQs

Boral concrete and clay tile typically lasts 20 to 30 years in North Texas, though the fasteners and underlayment beneath it wear out sooner – often in 15 to 20 years of Denton heat and hail. Most failures are in the layer under the tile, not the tile itself. Call (844) 651-3175 for an inspection and a written quote.
Often, yes. If the damage is isolated – a few cracked tiles, one flashing point, a section of valley – a repair in the $400 to $1,800 range usually solves it cleanly. If the underlayment is shot across a wide area, replacement is the right call. We tell you which one it is in writing before work begins.
A typical tile repair on a Denton home takes one to two days once the right tile is sourced and on site. Sourcing the exact Boral profile can add a few days depending on the model. We confirm the timeline in the written scope.
We match your Boral profile by course measurement and manufacturer stamp, then order through a documented supplier. We don’t claim to stock parts on a truck; the right component is ordered to your roof. Call (844) 651-3175 for a free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












