A Bradford company - serving Denton, TX
A new rear addition with a vaulted beamed ceiling and tall windows
CGI · Denton

CGI Home Additions & ADU in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A wide opening with a new beam where the kitchen wall was removed
A garage converted into a guest room and home office
A remodeled staircase with wood treads and a slim metal railing
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Home Additions & ADU: The Denton Owner’s Guide

We install CGI-compatible home additions and ADU packages in Denton, and a finished addition typically runs $45,000 to $130,000. A detached ADU built to Denton’s accessory-dwelling rules runs $90,000 to $220,000, and a garage conversion sits at $30,000 to $80,000. This is planned construction, not emergency work, so scheduling follows permitting and inspection timelines rather than a same-day dispatch.

General contractor measuring wooden wall studs with a tape measure in Denton, TX

Call (844) 651-3175

Owners usually land here after the first phase of a CGI-based build goes sideways. A subcontracted framer walks off mid-rough-in. The sheathing or the tie-in to the existing house doesn’t match the plans that were stamped at the city. Or an owner buys a CGI kit or panel package expecting it to bolt onto any Denton lot and finds the plate dimensions don’t line up with their slab. This page covers what actually matters: what fits, what fails, what it costs, and how to get it squared away.

Which CGI Models This Applies To

A single-story rear room addition with tall windows and a new patio

CGI doesn’t publish a single universal addition system. Packages are usually specified per project: panelized walls, roof trusses, subfloor systems, foundation interface hardware, and the connectors that tie new framing into existing structure. Identifying the right components means reading the plan set and the shop drawings, not matching a part number off a box. The label you need lives on the plan sheet or the panel tag, and it references the panel series, span, and load rating for that specific build.

That’s the compatibility gotcha nobody mentions up front: any part carrying a structural load in a Denton addition has to be signed off against a Texas-engineered plan set and pass city inspection. A component rated for one span in one series does not swap cleanly into another. Where an OEM match is slow or expensive, a quality aftermarket equivalent with the same load rating and certification is often the honest answer. We check the span and the certification first, then source. We’re an independent remodeling company, not affiliated with CGI.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Home Additions & ADU Is Failing

The part itself rarely fails in isolation. What fails is the interface: how the addition meets the existing house, the slab, and the weather. Watch for these.

  • Roof-to-wall separation. A gap or daylight where the new roof plane meets the original wall means the flashing and tie-in have failed. In Denton’s spring hail and wind events, that junction takes the worst of it.
  • Water staining at the foundation sill. Moisture tracking along the sill plate points to a failed sill seal or missing capillary break. North Texas clay soils swell and shrink with the seasons, and a sill that isn’t protected moves with them.
  • Sticking doors and hairline drywall cracks. These signal framing movement, often from an under-designed header or a span that wasn’t checked against the plan. New framing that settles more than the original house shows up here first.
  • Reduced insulation performance or cold walls. A wall cavity that loses its seal at the panel joint lets Denton’s summer heat straight through. Look for condensation on interior wall faces in humid months.
  • Panel or truss connections backing out. Loosened connectors on the roof trusses mean the fastening schedule wasn’t followed. This is a structural concern and worth a professional look before it gets worse.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Denton addition work lands in these ranges. A full home addition runs $45,000 to $130,000, an ADU build $90,000 to $220,000, and a garage conversion $30,000 to $80,000. The range moves on square footage, foundation type, whether you’re tying into existing plumbing and electrical, and how much of the existing structure needs correcting before the new work goes up.

  • Home addition: $45,000 – $130,000
  • ADU construction: $90,000 – $220,000
  • Garage conversion: $30,000 – $80,000

Every Bradford project gets a written price before any work starts, broken into line items so you can see parts versus labor. Permits are pulled and inspections passed. Every finished project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. You get a written price and a signed guarantee, in hand, at close.

General contractor measuring wooden wall studs with a tape measure in Denton, TX

DIY or Call Us?

An owner can safely check a few things: confirm the panel and truss tags against the plan set, photograph any water staining, and note where doors and windows are sticking. Those observations help us scope the job before we arrive.

What you shouldn’t do yourself is anything structural. Cutting a header, reflashing a roof tie-in, or altering a load-bearing connection on an addition is where DIY goes wrong fast, and on a Denton build it means an inspection failure and a redo. Tying a new addition into an existing house is height, load, and weather work. That calls for a trained, background-checked crew who knows Denton’s permitting and inspection sequence. Give us a call at (844) 651-3175 and we’ll walk it through with you.

FAQs

A framer checking new wall framing on a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary suite with built-in wardrobes and a window seatNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquette

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch