







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Denton Owner’s Guide
CGI kitchen remodeling in Denton typically runs $14,000 to $45,000, and small kitchens land between $9,000 and $20,000. Cabinet installation alone is $4,000 to $13,000, countertops $2,000 to $6,500, and backsplash work $800 to $2,500. We install with a written price before any work starts, so the number you agree to is the number on the invoice.

Most Denton owners don’t wake up planning a remodel. They notice it first in small failures: a door that hangs crooked because the cabinet box has swelled, a countertop seam that’s started to lift at the edge, or grout along the backsplash cracking away from a substrate that moved. Denton’s clay soils shift through the summer, and when a slab moves even a fraction, kitchen components take the load. That’s usually when the call comes in.
Key Takeaways
- Full CGI-configurable kitchen remodel in Denton: $14,000 to $45,000 installed.
- Small kitchens: $9,000 to $20,000. Cabinets: $4,000 to $13,000. Countertops: $2,000 to $6,500.
- Every job gets a written price before work starts and the 365-Day Done Right Promise in writing when we close.
- Bradford Remodeling is an independent provider and is not affiliated with CGI.
Which CGI Models This Applies To

CGI is a specification and materials program rather than a single product line, so “which model” really means which specification your kitchen was built to. Matching the right replacement means reading the label inside the cabinet door, the underside of the countertop (Cambria and Caesarstone both pour their names into the slab edge), and the finish code stamped on the cabinet box. Those three labels tell us the series, the material grade, and the finish batch far better than a memory of what the kitchen looked like on install day.
The genuine gotcha in Denton is dimensional drift. Cabinet boxes built to a CGI spec from several years back don’t always match current stock sizing, and a replacement door or drawer front can land an eighth of an inch off if you order purely by the old catalog number. We measure the opening, not the label. On the OEM-versus-aftermarket question: OEM gives you an exact finish match and the cleanest warranty paper trail. A quality aftermarket equivalent can save real money on a countertop or a fixture where color matching is less critical – a Kohler or Moen fixture, for example – but for cabinetry a mismatched finish will bother you every day. We’ll tell you which parts on your job are worth the OEM premium and which aren’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
Here’s what a failing CGI kitchen actually looks like, in the order we usually see it in Denton homes:
- Doors that won’t hold adjustment. Hinges that keep drifting after tightening usually mean the cabinet box or the substrate behind it has swelled or shifted, not that the hinge is bad.
- Seams lifting on the countertop. A visible gap or a lifting edge at a slab joint points to movement underneath – often a substrate that wasn’t fully leveled before the slab went down.
- Grout cracking along the backsplash. Cracks that run in a straight line follow the wall or slab, which means the substrate moved after install.
- Drawer fronts rubbing. Constant rubbing on one side means the box is out of square, common in Denton kitchens built over older framing.
- Water staining at the toe kick. Darkening at the base of the cabinets usually traces back to a slow leak under the sink, and the cabinet bottom is the first thing to go.
Each of these looks like a cosmetic nuisance. Each one is the kitchen telling you the substrate or the structure moved.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers break down for a Denton CGI kitchen, installed:

- Full kitchen remodel: $14,000 to $45,000
- Small kitchen remodel: $9,000 to $20,000
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
What drives the range is scope and material grade, not labor tricks. Cabinet count, whether we’re pulling the old substrate down to framing, and which surface material you choose (Cambria and Caesarstone sit at different points on the scale) move the number more than anything else. Every quote is line-itemed: parts, labor, tear-out, and haul-off each get their own line. If the job is a targeted replacement rather than a full remodel, we price it that way. All completed work carries the 365-Day Done Right Promise – if it fails within that year, Bradford returns and corrects it at no charge.
DIY or Call Us?
You can safely check a lot of this yourself. Open the cabinet doors and read the labels. Look along the backsplash for cracks that follow a straight line. Press on the countertop seams and see if one edge lifts. Take a photo of the label under the sink and the finish code on a cabinet box, and you’ll have most of what any contractor needs to price the job.
Where DIY goes wrong: kitchens involve water, gas, and electrical behind the walls, and re-seating a cabinet box or a countertop over a substrate that’s still moving just delays the same failure. Pulling a gas range without shutting the line correctly is a real hazard. If you’ve found staining at the toe kick or a crack that’s spreading, that’s a call-us situation, not a patch-it situation. Call (844) 651-3175 and we’ll give you a free estimate with the price in writing before anything starts.
FAQs

A well-installed CGI-spec kitchen should hold 15 to 20 years before major components need replacing, but in Denton the practical lifespan of the cabinetry and countertop substrate is closer to 10 to 15 years because of slab movement and summer humidity swings. Cabinets that stay square and countertops that stay flat are the tell that the install was done right underneath. Call (844) 651-3175 for a free estimate on your specific kitchen.
Often yes. A drifted hinge, a resealed countertop seam, or a regrouted backsplash can buy you years if the substrate underneath is sound. What can’t be repaired economically is a cabinet box that’s swelled from water or a countertop sitting on a substrate that’s still moving – replacing just the visible piece there tends to repeat the same failure within a season. We’ll tell you honestly which side of that line your kitchen falls on, and the estimate is free.
A targeted replacement like a cabinet run or a countertop is usually a few days; a full CGI kitchen remodel in Denton runs several weeks depending on scope, and we give you the schedule in writing before we start. We don’t quote a one-day turnaround on a kitchen – nobody does that honestly. Call (844) 651-3175 and we’ll walk your scope and give you a real timeline.
We work from the labels and measurements on your kitchen, not from a catalog guess, and we source through a documented roster of name-brand materials – KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone surfaces, Kohler and Moen fixtures. That roster means every spec is traceable and backed by the manufacturer’s own warranty, which sits underneath the 365-Day Done Right Promise we put in writing. For an exact price on your Denton kitchen, call (844) 651-3175 – estimates are free.
When we close a job, the site is clean, the scope is documented, and you’re holding a signed written guarantee – that’s what squared away looks like. If you’re ready to stop guessing at the number, call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate with the price in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












