







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Driveway & Pavers: The Denton Owner’s Guide
Cover-compatible paver and driveway work in Denton typically runs $7,000 – $18,000 for a full paver driveway installation, $5,000 – $14,000 for a driveway replacement, and $250 – $700 for sealing. If you’re replacing a failed section of pavers or the base under them, most jobs are scheduled within a few business days, and estimates are free. Owners usually find the problem the same way: a dip that holds water after a Denton rain, a paver edge that lifts when a car pulls in, or a joint that keeps washing sand out no matter how many times it gets swept. Cover is a brand name; we’re an independent contractor and not affiliated with them. What matters on your property is matching the material and base build to what’s already there.

Which Cover Models This Applies To

Cover’s hardscape line splits into two broad families: interlocking concrete pavers for driveways and patios, and segmental retaining wall block used at grade changes and driveway edges. Across those families, the parts you’ll actually replace are the units themselves, the joint sand or polymeric joint material, the edge restraint, and sometimes the compacted base aggregate underneath. The identification step is done at the pallet or on a leftover unit, not from memory. Look for a stamp on the side of a paver, an inked code, or a color and dimension combination on the original bill of sale. Measure an intact unit in three dimensions (length, width, thickness) because a 2 3/8-inch paver and a 2 3/4-inch paver don’t retile into the same course.
OEM replacement matters most when you’re patching a field and need the color to age in step with the existing run. On Cover, dyes and surface textures can shift slightly between production runs, so an exact current-production match is sometimes impossible and a blended patch is the honest answer. Aftermarket paver units are a reasonable choice when the job is a small repair, a border reset, or a section that sits out of the main sightline. For a full driveway replacement, the spec decision belongs in writing before material is ordered, and that’s part of how we work with Cover products in Denton.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Driveway & Pavers Is Failing
- Water pooling in the same low spot after every rain. A dip means the base aggregate under that course has settled, washed out, or was never compacted in lifts. Resetting the surface pavers without rebuilding the base puts the same dip back within a season.
- Joint sand washing out along the driveway slope. Denton’s clay-heavy soil holds water and then lets it move, and runoff carries fine sand out of open joints. If sand escapes faster than you can replace it, the joint material or the edge restraint is the real problem.
- Edge pavers lifting or spreading outward. The edge restraint has lost its anchor, usually from root pressure, a vehicle clipping the border, or a restraint that was spiked into soft subgrade. Once an edge moves, the field behind it loosens.
- Rutting where tires track. Tires reveal whichever paver course sits on the least-compacted base. On older Cover installs, this shows up as two shallow channels and often follows the path a heavy vehicle once took.
- Surface spalling or color fading beyond normal weathering. Freeze-thaw cycles in North Texas plus sun exposure will dull any paver, but flakes or pits on the face suggest the units took on water or were sealed too soon after install.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Cover-compatible driveway and paver work runs in Denton, installed, before any surprises:
| Work | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation (for comparison) | $4,500 – $12,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
The range moves with square footage, how much base has to be excavated and re-compacted, edge restraint configuration, and whether the material is a direct OEM match or a blended equivalent. Every job gets a written price before any work starts, itemized so you see material and labor as separate lines. Background-checked, uniformed technicians handle the work, and the finished install is covered by the 365-Day Done Right Promise: if the work fails within that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Walk the driveway after a rain and mark low spots with chalk. Lift one loose paver and look at what’s under it – if you see mud or loose, uncompacted gravel rather than a firm bed, the base is the issue. Pull the edge pavers back and look for a bent or missing spike restraint. The DIY risk isn’t a shock or a fall here – it’s the base. Lifting pavers, raking the aggregate by hand, and pressing them back down without a plate compactor in proper lifts leaves the same dip you started with. On a driveway that sees daily vehicle load, that’s wasted weekend and wasted material. Call (844) 651-3175 for a free written estimate and we’ll tell you honestly whether a targeted repair or a full section rebuild is the right call.

FAQs

How long do Cover pavers last on a Denton driveway? The paver units themselves can run 25 years or more in Denton’s climate. The joint sand, edge restraint, and base compacting are what shorten that – and those are exactly what fails first in North Texas soil. Call (844) 651-3175 if you want an honest read on whether your issue is the surface or underneath it.
Can this be repaired instead of replaced? Yes, often. A settled course, a spread edge, or washed-out joints can usually be fixed for a fraction of a full replacement as long as the base under that section is intact. We only recommend a full driveway replacement when the base has failed across a large area. Call (844) 651-3175 for the free estimate that answers which one you actually need.
How long does the swap take? A targeted repair of a single section usually takes a day. A full driveway replacement typically takes three to five days, depending on square footage, excavation, and curing. You’ll get the schedule in writing before we start. Call (844) 651-3175 to lock in a free estimate.
How do you source the part? We work from a documented roster of premium hardscape brands including Belgard and Unilock, and we match your Cover installation to the existing unit by dimension and color code from a stamped or leftover sample. Specifications get written into the estimate so nothing is guessed at. Call (844) 651-3175 to schedule your free estimate.
Bradford Remodeling Co Denton is a member of the Garrison Partners family, independently owned and operated and held to The Garrison Standard – which means a written price before work begins, on every job. Beyond hardscape, we also install and service KraftMaid, Cambria, and Silestone materials for kitchens and baths. Our technicians have up to 22 years of experience, and a live person answers the phone around the clock.
Call (844) 651-3175 for a free estimate on your Cover driveway and pavers work in Denton.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












