A Bradford company - serving Denton, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower
C
CWS · Denton

CWS Bathroom Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Bathroom Remodeling: The Denton Owner’s Guide

CWS bathroom remodeling installed by an independent contractor in Denton typically runs $9,000 – $28,000 for a full bath and $5,000 – $12,000 for a small one, with a written price in hand before any demolition starts. We install CWS-compatible bath systems and components, and we are an independent service provider, not affiliated with CWS.

Contractor using a level to install tiles during bathroom remodeling in Denton, TX

Call (844) 651-3175

Owners usually find the problem the same way. A ceiling stain appears below the upstairs bath and the paint keeps bubbling back after each touch-up. The shower pan flexes underfoot near the drain, so you start stepping around it. The caulk line at the tub opens again three weeks after you re-caulk it. Grout at the floor-to-wall joint crumbles into the corner. Or the exhaust fan runs but the mirror still fogs for ten minutes after a shower. Each of those is a symptom of something behind the surface, not the surface itself.

Which CWS Models This Applies To

A tile setter installing wall tile in a shower

CWS covers more than one line, and the parts don’t swap cleanly between them. Before anyone orders a pan, a valve cartridge, or a trim kit, we identify what’s actually on the wall and in the slab. The data plate is the starting point: look on the inside rim of the shower pan, the underside of the tank lid, or behind the access panel for a model and serial label. Next come measurements. Pan drain centers shift by fractions between series, and a pan set at a slightly different offset means a new rough-in, which changes the whole scope.

CWS also runs different finish and valve families across its bath lines, and a trim kit from one won’t seat on a cartridge from another. That mismatch is the single most common reason a homeowner buys a part that “fits CWS” and finds it doesn’t fit theirs.

Then there’s the OEM-versus-aftermarket call. For trim, escutcheons, seats, and standard cartridges, a quality aftermarket equivalent is often fine and less expensive, provided the spec sheet matches. For pan assemblies and any structural component, we specify OEM or an exact-spec replacement, because the warranty and the dimension tolerance both matter. Our technicians have up to 22 years of experience reading these labels and catching the mismatch before material gets ordered. On the material side, we work from a documented roster that includes KraftMaid, Cambria, and Silestone along with the fixture brands that pair with CWS-compatible systems, so every spec is traceable.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Bathroom Remodeling Is Failing

  • Flex or softness in the shower pan. A pan that gives underfoot or feels spongy near the drain usually means the substrate beneath it has taken on water. Left alone, that moisture travels into framing and subfloor.
  • Caulk that fails again within weeks. Repeated caulk failure points to movement, not bad caulk. Either the surround isn’t anchored properly or water is getting behind it and pushing the joint open.
  • Persistent fogging and lingering damp air. An exhaust fan that runs but doesn’t clear the room is typically undersized for the cubic footage or venting into the attic instead of outside, which traps moisture in Denton’s humid spring and summer air.
  • Grout cracking along the floor-to-wall joint. Hairline cracks that reappear after each regrout signal movement between the wall and floor, often from a pan or liner that wasn’t set on a stable base.
  • Staining or bubbling on the ceiling below. Any stain under a second-floor or adjacent bath is an active leak until proven otherwise. This one moves fastest and does the most damage.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

In Denton, a full bathroom remodel runs $9,000 – $28,000, and a small bathroom remodel runs $5,000 – $12,000. The lead range for this page is the full-bath figure. Narrower scopes price out differently: a walk-in shower installation sits at $4,500 – $12,000, a shower replacement at $3,000 – $8,500, a tub-to-shower conversion at $3,500 – $10,000, and a bathroom vanity installation at $800 – $3,000.

What drives the spread: the condition of what’s underneath, whether the rough-in has to move, pan or liner type, tile versus a solid surround, and fixture tier. Every project gets a written line-item price before work begins, with parts and labor broken out, and no numbers that move at the door. All completed work carries the 365-Day Done Right Promise: written guarantee, full year, and if the work fails inside that window we come back and correct it at no charge.

DIY or Call Us?

Some of this you can check yourself, safely. Look for the model and serial label and write down what it says. Measure the pan and the drain center. Confirm the exhaust fan actually terminates outside the house rather than into the attic. Re-caulk a clean, dry joint once and see whether it holds.

Where DIY goes wrong is below the surface. Replacing a shower pan means removing the surround, cutting out the old pan, and rebuilding the substrate with the right slope so water leaves the drain instead of pooling on it. A pan set on a bad base fails the same way the old one did, and you’ve paid for it twice. Tearing into a valve wall has its own risk: a cartridge that won’t seat or a supply line that doesn’t seal turns a weekend project into a shutoff-and-call. We do this work under a written price and a one-year guarantee, so the repair is squared away when we leave. Call (844) 651-3175 for a free estimate and we’ll identify the part before anyone quotes it.

FAQs

A small remodeled galley kitchen with cabinets to the ceiling

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch