







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Denton Owner’s Guide
We install and repair CWS-compatible driveway and paver systems in Denton, and hardscaping projects here run $7,000 – $18,000 for a paver driveway and $3,500 – $11,000 for a paver patio, with written pricing before any work starts. Denton owners usually find out something has gone wrong the same way: a paver lifts after a freeze, a section of the driveway settles toward the garage, or water starts pooling at one corner of the slab every time it rains. That pooling is often the first real symptom, and it’s usually pointing at what’s happening underneath.

Which CWS Models This Applies To

CWS driveway and paver systems aren’t tied to a single model line. The product is a family of base preparation systems, joint sand, edge restraints, and paver profiles, and what matters is matching the layer that failed to what’s actually on your property. You’ll find the identifying information in three places: the paver dimensions themselves (CWS profiles come in standard thicknesses, so measure the height of an existing paver at the edge of the driveway, not the face), the base depth you can see in any area where a paver has already shifted, and the joint sand color and texture still sitting in the intact sections.
For the base and joint components, CWS uses specific spec ranges for residential driveways, and here’s the gotcha that matters in Denton: a base built to a lighter-duty specification than the one your soil and drainage require will fail early, and it’ll fail in a way that looks like a paver problem when it’s a base problem. That’s why we measure before we price. We can’t confirm a part match from a photo. Where a CWS component isn’t available, we source a documented aftermarket equivalent with a published spec sheet rather than an unbranded substitute, and we tell you which one we’re using and why. We also service KraftMaid, Cambria, and Silestone products on interior jobs, but this page stays on hardscaping. Bradford Remodeling Co Denton is an independent service provider and is not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
These are the five symptoms we see most in Denton, and each one has a specific cause underneath it.
- Pavers lifting after a freeze. Water gets into the joints, expands, and pushes the units up. This points at failed joint sand or a base that isn’t draining, not at the pavers themselves.
- Pooling or standing water at the driveway edge. Usually a settled base or a slope that’s falling toward the house instead of away from it. Left alone, that water works its way under the slab or the paver field and speeds up the next failure.
- Sunken or uneven sections. The base has lost compaction, often because Denton’s clay-heavy soil moves with wet and dry cycles. Uneven settlement in one area almost always means the base wasn’t deep enough or wasn’t compacted in lifts.
- Joint sand washing out or eroding. Rain running across the surface instead of draining off carries the sand with it. Once the joints open up, the pavers lose their interlock and start rocking.
- Cracked or spalled paver edges. Freeze-thaw cycles in North Texas are hard on the edges of hardscape units, and a cracked edge lets water straight into the base. Edges that fail along one line usually trace back to an edge restraint that’s loosened.
Replacement Cost & What’s Included
Here’s what this work actually runs in Denton, and what each number covers.
| Scope | Installed Price Range (Denton) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves the number: total square footage, how much of the existing base has to come out, and whether the subgrade needs correction because of soil or drainage conditions. We give you a written, line-item price before any work starts, and that price holds. There are no numbers that move at the door and no change orders you didn’t approve. Every completed project is covered by our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can check safely on your own. Others you shouldn’t touch, and we’ll be direct about which is which. What you can do: walk the surface and mark where it’s uneven, run a hose and watch where water goes, and photograph the joint sand condition. All of that tells us a lot before we arrive, and it costs you nothing.
Where DIY goes wrong: resetting pavers on a failed base without correcting the base underneath, or top-dressing joints without addressing why the sand washed out in the first place. You end up repeating the job in a year, and sometimes you make the drainage worse. Paver work that involves base correction, edge restraint replacement, or drainage changes also touches the structure of your driveway and the way water moves around your foundation, and that’s where a wrong fix gets expensive. Call (844) 651-3175 and we’ll tell you honestly whether you’re looking at a repair or a rebuild before you spend anything.
FAQs

The pavers themselves typically last 20 to 30 years when the base and drainage are right. What fails first is almost never the paver; it’s the joint sand, the base, or the edge restraint, and each of those has a shorter service life. Call (844) 651-3175 for an exact quote on your repair – estimates are free.
Often yes. If the failure is isolated to one area and the base under the rest of the field is intact, we can lift that section, correct the base, and reset the existing pavers. If the settling is widespread or the drainage is wrong across the whole driveway, a partial repair just moves the problem. We’ll tell you which one you’re facing after we look at it.
An isolated section repair usually runs one to two days. A full override or replacement typically takes three to five days depending on square footage and how much base has to be corrected. We put the schedule in writing along with the price, and you’ll know who’s coming and when before the crew arrives.
We identify what’s actually on your property by measuring the paver thickness and base depth, then order to that spec. Where a CWS component is available, we use it. Where it isn’t, we source a documented aftermarket equivalent with a published spec sheet that meets or exceeds the original. You’ll see the brand and spec in the written quote before we order anything, and every job is backed by background-checked, uniformed technicians and the 365-Day Done Right Promise.
Get Your Written Price
If your CWS driveway or pavers are failing, the next step is a real number, not an estimate you have to chase down. Call Bradford Remodeling Co Denton at (844) 651-3175 to schedule your free estimate. We give you a line-item price in writing before any work starts, so you’ll know what the repair or rebuild covers and what the guarantee protects. When the job closes, you’ll have a clean site, a documented scope, and a signed written guarantee in your hand.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












