







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Home Additions & ADU: The Denton Owner’s Guide
We build and finish CWS-compatible home additions and ADUs in Denton, and those projects typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, depending on square footage, foundation type, and finish level. Scheduling starts with a free written estimate, not a same-day visit. Homeowners usually reach this page after a finished space starts telling on itself: a door that won’t latch in the summer, a hairline crack above a new header, a room that never quite holds temperature, or an inspector’s correction notice on a conversion that was permitted as something else.

Which CWS Models This Applies To

CWS covers more ground than the name suggests, and the part you need depends on which product line you’re dealing with. A panelized addition, a modular ADU, a garage conversion kit, and a site-built room addition all share one thing in Denton: the scope has to match the stamped drawings that were submitted for the permit. Before anything gets ordered, we pull the identification off the structure itself. Look for the data plate or serial label, usually inside a cabinet run, on the panel edge in the mechanical closet, or on the frame of the access door. From there, square footage, roof pitch, wall thickness, and foundation type (slab, pier-and-beam, or helical) tell us which CWS series and revision we’re matching to.
Here’s the compatibility gotcha that costs Denton owners real money: CWS has revised panel connection details and window rough-opening dimensions across production runs, so a part pulled for one revision often won’t seat cleanly on another. Measuring isn’t enough. You need the revision letter and the production window. OEM parts carry the cleanest fit and the manufacturer’s own warranty. Quality aftermarket equivalents can work for hardware, trim, and fasteners, but for structural connectors and envelope components we stay with OEM or an equivalent that carries the same load rating in writing. We’re an independent contractor, not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Home Additions & ADU Is Failing
- Doors and windows that bind in summer and free in winter. In North Texas, soil movement and thermal expansion work on the frame seasonally. When the rough opening was cut to the wrong revision tolerance, that movement shows up as sticking hardware.
- Hairline cracks above headers and at wall-to-ceiling joints. Usually a sign of settlement or a connector that wasn’t torqued to spec. Neither fixes itself, and both get more expensive the longer they’re left.
- A room that won’t hold temperature. Often a failed seal at a panel joint or an insulation gap at the transition between the addition and the original house. Denton’s summer heat finds every one of those gaps.
- Water staining at the roof-to-wall tie-in. Flashing details at the junction are the first thing to fail when the original install skipped the step flashing or set it under the wrong course of shingles.
- Correction notices on a conversion. A garage conversion finished without the right egress, ceiling height, or separation from the attached garage will fail inspection, and that paperwork follows the house.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

These are installed ranges for Denton, not part prices. What drives the number: square footage, foundation type, whether the roof line ties into the existing structure, and finish level (builder-grade vs. custom cabinetry and surfaces).
| Scope | Installed Range (Denton) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
Every quote is written and line-item before work starts: permits, framing, rough-in, insulation, drywall, finishes, and cleanup each listed separately. No number moves at the door. If you’re finishing with cabinetry or surfaces, we install documented brands including KraftMaid, Cambria, and Silestone, alongside Wellborn and Caesarstone. All completed work carries the 365-Day Done Right Promise – a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
There’s a short list you can safely check yourself: look for the data plate and write down the serial and revision, photograph any crack or stain with a tape measure in frame for scale, and note the season when a door started binding. That information speeds up your estimate and often saves a diagnostic trip.
Past that, this stops being a homeowner job. Structural connectors, roof-to-wall flashing, and any work that touches the permit drawings carry real risk – a failed tie-in means water in the wall cavity, and a mis-set connector means load where it shouldn’t be. Electrical, gas, and anything involving a load path belong to a trained professional. We don’t recommend opening a wall to “take a look” on a permitted structure. Our technicians have up to 22 years of experience and are background-checked and uniformed, so you know who’s at the door. Call (844) 651-3175 and a live person answers, day or night, for a free estimate.
FAQs

Done correctly, the structure should hold for decades; the failures we see in Denton show up in the first few years, usually at the roof tie-in, the panel joints, or the transition to the original house. Once corrected properly, you shouldn’t see those symptoms return. Call (844) 651-3175 for an exact quote – estimates are free.
Often yes. A single failed connector, a flashing detail, or a binding door can be corrected without rebuilding the addition. What can’t be patched is a foundation or framing problem that was built wrong from the start. We tell you which one you’re looking at before any work begins. Call (844) 651-3175 for a free estimate.
A targeted repair can be finished in a few days; a full addition or ADU is a weeks-to-months project with a written schedule up front. We give you the timeline in writing before the first tool comes out. Call (844) 651-3175 for an exact quote – estimates are free.
We identify the series, revision letter, and production window from the data plate and the permit drawings, then order OEM or a rated equivalent that matches. We don’t guess at revision compatibility, and we don’t carry parts on a truck. Call (844) 651-3175 for a free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












