A Bradford company - serving Denton, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
C
CWS · Denton

CWS Kitchen Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Kitchen Remodeling: The Denton Owner’s Guide

CWS kitchen remodeling in Denton runs $14,000 to $45,000 installed for a full kitchen, and small kitchen remodels land between $9,000 and $20,000. We work with CWS-spec cabinets, surfaces, and fixtures on a daily basis and can usually tell you over the phone whether your project is a partial swap or a full tear-out. Most Denton owners don’t find us until something has already failed: a cabinet run pulling away from the wall, a drawer box that won’t track, a surface that has cracked along a seam, or a remodel that a previous crew left half-finished with the materials still sitting in the garage.

Two professional contractors installing kitchen cabinets during a home renovation. in Denton, TX

Call (844) 651-3175

Which CWS Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

CWS cabinetry and surfacing shows up across several product lines, and the parts don’t interchange freely between them. Before we quote anything, we identify what you actually have: the model and series label is usually on the inside of a cabinet door, on the back panel of a base cabinet, or on a spec sheet stapled inside the sink base. If the label is gone, we measure door overlay, drawer box width and depth, hinge cup bore (typically 35mm on European-style hinges), and the cabinet depth (12-inch uppers versus 24-inch bases are the common standards, but not universal).

That measurement step matters more than it sounds. A drawer slide from one CWS series will not drop into another series’ cabinet side without new boring, and a replacement door from a different line will not match the face frame reveal. On the surface side, CWS quartz and solid-surface tops are cut to the cabinet run, so a cabinet swap almost always means a new top unless the footprint stays identical.

Our guidance on OEM versus aftermarket is straightforward: buy OEM for anything that shows – doors, drawer fronts, surface panels – because color and profile matching against an older run is where aftermarket parts fall apart. For hidden hardware like slides, hinges, and clips, a quality aftermarket equivalent is often the better buy because it lasts longer than the original did. We don’t stock parts and we don’t carry them on a truck. Every replacement is sourced and confirmed against your measurements before it’s ordered.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Kitchen Remodeling Is Failing

These are the failures we see most often in Denton kitchens, and what’s actually behind each one.

  • Cabinet doors sagging or scraping the frame. The hinge plate has loosened or the hinge itself has worn past its adjustment range. On older CWS runs, the original hinges are the first thing to go.
  • Drawers that won’t close flush or jump the track. A failed slide, or a drawer box that has swollen from moisture. Denton’s humidity swings punish particle-board boxes more than solid or plywood construction.
  • Cracks along a countertop seam or at the sink cutout. Stress from an unsupported span or a cutout that was never properly eased. Solid surface can often be repaired; quartz seams are harder and sometimes mean a new top.
  • Water staining or soft spots under the sink base. A slow leak from the supply line or disposal flange, not a cabinet problem at its root. Left long enough, the cabinet floor has to be replaced, not just dried out.
  • A partial remodel that stalled out. Cabinets hung but no top, or a tear-out with the old surfaces still stacked in the garage. This is common in Denton, and it’s fixable, but it starts with a documented scope of what’s actually there.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A freestanding soaking tub in a remodeled primary bathroom

Here’s what Denton homeowners actually pay for the piece that’s failing, installed:

Work Installed range
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000
Small kitchen remodel $9,000 – $20,000
Full kitchen remodel $14,000 – $45,000

What moves the number: cabinet count and line (semi-custom runs higher than stock), surface material (Cambria or Silestone sits above entry-level solid surface), whether the plumbing or electrical has to move, and how much of the old kitchen has to come out first. You get a written, line-item price before any work starts, so parts and labor are separated and visible. No numbers move once work begins. Every project carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.

DIY or Call Us?

Some of this is safe to check yourself. Open a drawer and look at the slide for a brand or model stamp. Shine a light under the sink base and look for staining. Measure your cabinet depth and door overlay so a replacement part can be matched. Tightening a loose hinge screw and adjusting a slide are reasonable homeowner tasks.

Where it goes wrong: pulling a countertop without knowing what’s under it, cutting into a cabinet run that carries a surface, or trying to fix a moisture problem by drying it out without finding the leak. And before anyone works near the sink or disposal, the circuit feeding that area gets shut off at the breaker – not flipped off at a switch. Water and electricity in the same cabinet is not a place to guess.

If you’re not sure what failed, call us at (844) 651-3175. A live person answers, 24 hours a day, and we can usually narrow down the part before anyone comes out.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

How long does CWS kitchen cabinetry and surfacing last in Denton? Figure 15 to 25 years for cabinets and hardware in this climate, and 10 to 20 years for surfaces depending on material. Denton’s summer humidity and the freeze-thaw swings we get in winter are hard on particle-board boxes and on any seam that wasn’t properly sealed.

Can the part be repaired instead of replaced? Often, yes. Hinges, slides, and clips are repair-or-replace decisions, and we’ll tell you honestly which is the better buy. Doors, drawer fronts, and cracked solid-surface tops usually fall on the replacement side. Call (844) 651-3175 for a free estimate and we’ll price both paths.

How long does the swap take? A hardware or single-cabinet swap is a half-day to a day. A countertop or cabinet run is typically two to four days once the part is on site. A full kitchen remodel in Denton runs two to five weeks depending on scope, and your written scope states the schedule up front.

How do you source the part? We identify your CWS model and series from the label or by measurement, confirm the replacement spec, then order it. We don’t stock parts and we don’t carry them on a truck, so nothing gets swapped in on a guess. We also work with KraftMaid, Cambria, and Silestone when a CWS part is discontinued and a compatible alternative makes more sense than a custom build.

Bradford Remodeling Co Denton is an independent remodeling contractor. We’re not affiliated with CWS. Our technicians have up to 22 years of experience, and every job comes with background-checked, uniformed technicians, a written price before work starts, and the 365-Day Done Right Promise behind the finished work. Everything is held to The Garrison Standard, the framework behind every price and every guarantee we put in writing.

Call (844) 651-3175 for a free estimate. We’ll look at what’s actually failing in your kitchen, give you a written price for the fix, and put the guarantee in your hand when the job closes – clean site, documented scope, no surprises.

Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removedA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch