A Bradford company - serving Denton, TX
An open living room and dining area after a whole-home remodel
C
CWS · Denton

CWS Windows & Doors in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Windows & Doors: The Denton Owner’s Guide

We install and service CWS-compatible windows and doors throughout Denton, and most single window or door swaps land between $4,500 and $15,000 installed for a full-unit replacement, while impact-rated replacements run $8,000 to $25,000. A single failed sash, balance, or hinge is often a smaller, targeted repair rather than a whole-unit job, and we give you a written price before anything starts so you know which side of that line you’re on. We’re an independent service provider, not affiliated with CWS.

General contractors carrying drywall panels on a residential construction site in Denton, TX

Call (844) 651-3175

Most Denton owners find us the same way: a window that won’t stay up, a door that drags the sill in July, or fog between the panes that shows up after a cold front. The part didn’t announce itself. It just stopped working one day, and now the house is hotter, the door won’t latch, or there’s a whistle at the seam every time the north wind kicks up.

Which CWS Models This Applies To

A built-in window seat in a bay window

CWS built a lot of product lines over the years, and the part that fits your unit depends on which series it came from. The reliable way to identify what you have is the manufacturer label, usually stuck inside the upper jamb of the frame or on the edge of the operable panel. Photograph it before you do anything else. The label carries the series number, the size callout, and the glass package code, and that’s what we match parts against.

When the label is missing or unreadable, we measure to the nearest 1/16 inch across the rough opening and pull the tilt-pin and balance type from the sash. That combination tells us which CWS series family we’re dealing with. On the OEM-vs-aftermarket question: for balance assemblies and weatherstripping, a quality aftermarket equivalent is often fine and more available. For hinges, rollers, and lock hardware on CWS doors, the OEM part is the safer match because tolerances on the door frame are tighter than they look.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Windows & Doors Is Failing

  • The sash won’t stay up. The balance assembly has lost tension or the spiral rod has snapped. This is the most common failure we see, and it gets worse fast once the rod starts to unwind.
  • Fog or condensation between the panes. The sealed glass unit has lost its perimeter seal, and the desiccant inside is spent. In Denton’s summer heat, that seal degrades faster than the glass itself.
  • The door drags or won’t latch. Usually a worn hinge or a settled frame, not the door slab. Check the reveal at the top and bottom corners before you assume the worst.
  • Water stains on the interior sill. The weatherstripping or sill pan has failed, and water is getting behind the frame. Left alone, that’s a substrate problem, not a window problem.
  • Draft or whistle at the edges. The perimeter seal or sweep has compressed and lost contact. You’ll feel it most on the north and west exposures.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A powder room with botanical wallpaper and a stone sink

For Denton, a standard window replacement runs $4,500 to $15,000 installed, and impact window installation runs $8,000 to $25,000. Those ranges cover the unit, labor, and disposal. What drives the number is the glass package, the size and count of openings, and whether the frame is sound enough to accept a replacement unit or needs to come out to the rough opening. If you’re also planning a broader kitchen remodel at $14,000 to $45,000 or a bathroom remodel at $9,000 to $28,000, window work is often folded into that scope so the ordering and sequencing happen once.

Every project gets a written price before any work starts. No numbers that move at the door. All completed work carries the 365-Day Done Right Promise: if the work fails inside that full year, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself. Photograph the label. Look for cracks in the glass or frame. Test whether the sash moves smoothly in the track. Feel for draft along the perimeter on a windy day. Those observations help us quote accurately and save you a trip charge.

What you shouldn’t do is pull a sealed glass unit apart, remove a door slab without a second set of hands, or try to reset a frame that’s out of square. That’s where DIY goes wrong, and you end up with a water intrusion problem and a voided manufacturer warranty. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed, so you know who’s walking through your door. Call (844) 651-3175 to schedule a free estimate.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch