







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling: The Denton Owner’s Guide
Delta-compatible bathroom remodeling in Denton runs $9,000 – $28,000 installed, and most of that spread comes down to what’s behind the wall, not the fixtures in front of it. If your Delta valve, cartridge, trim kit, or shower assembly has started to fail, the fix is rarely a single part swap on a 20-year-old rough-in; it’s a scope decision. Owners usually find out the hard way: a shower that won’t hold temperature, a handle that drips after you shut it off, water staining the drywall in the closet behind the valve wall, or a trim kit that no longer matches anything still made for that series. We’re Bradford Remodeling Co Denton, an independent contractor, and we’re not affiliated with Delta. We work with Delta fixtures every week in Denton homes.

Which Delta Models This Applies To
Delta’s residential bathroom line breaks into a few families you’ll run into in Denton: the Monitor and Monitor 13/14/17 pressure-balance series (the most common tub and shower valve in this market), the MultiChoice universal rough-in, the single-handle kitchen-and-bath lavatory faucets, and the older two-handle and widespread configurations still sitting in 1980s and 1990s builds around Southridge and the older streets near the Square. The compatibility gotcha most homeowners miss: a MultiChoice rough-in accepts a wide range of trim kits, but the cartridge inside it does not interchange across every generation. Delta has revised its RP-numbered cartridges more than once, and a cartridge that fits a 2008 valve body won’t seat in a 1997 one. Pull the trim plate, read the RP number stamped on the cartridge, and match it exactly before anyone orders anything. OEM versus aftermarket is a real decision here. Delta OEM cartridges cost more and carry the manufacturer’s spec; quality aftermarket equivalents exist and work, but only for the exact series they’re listed against. We don’t carry parts on a truck and we don’t stock them locally. We source to the part number on your valve.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Bathroom Remodeling Is Failing
- The shower won’t hold temperature when someone flushes. That’s a pressure-balance cartridge or balancing spool that’s worn, not a water heater problem. It shows up in Denton two-story homes where the upstairs bath shares a supply line with a downstairs laundry.
- The handle drips after you shut it off. A scored cartridge seat or a failed O-ring. Left alone, it erodes the valve body and turns a $40 part into a $900 rough-in replacement.
- Water staining the drywall on the back side of the valve wall. The seal at the trim plate or the cartridge housing has failed. This one is the reason we open the wall rather than guess.
- The handle feels loose or turns past its stop. The cartridge retainer or the handle adapter has worn, common on 15-plus-year-old Monitor valves.
- The trim kit no longer matches anything made for the series. Delta discontinues finishes and trim lines. When the replacement trim is no longer available, the honest answer is a new valve and trim, which folds into a remodel scope rather than a repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down in Denton, with a written price before any work starts, every time:
- Cartridge or trim swap only: $300 – $850 installed, part and labor, when the rough-in is sound.
- Valve and trim replacement behind the existing wall: $1,200 – $2,600 installed, including drywall access and patch.
- Shower replacement: $3,000 – $8,500.
- Tub-to-shower conversion: $3,500 – $10,000.
- Walk-in shower installation: $4,500 – $12,000.
- Full bathroom remodel, Delta fixtures and trim throughout: $9,000 – $28,000. A small bathroom remodel lands at $5,000 – $12,000.
What moves the range: whether the rough-in has to move, whether the substrate behind the tile is sound, and whether the trim line you want is still in production. Every completed job carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check the trim plate for the RP cartridge number, shut the water at the fixture stops, and photograph the valve body before anyone touches it. Past that, we’d stop you. Opening a live shower valve means water in a wall cavity, and a valve that’s 20 years old in a Denton home is often corroded enough that the cartridge retainer snaps on removal, which turns a small job into an opened wall. If your valve body is galvanized or the stops won’t close, don’t force it. Call (844) 651-3175 and we’ll price the job in writing. A live person answers, day or night.

FAQs

Eight to twelve years in most North Texas homes, and Denton’s water is hard enough that mineral scale shortens that on the hot side. Scale builds on the cartridge seat and scores it, which is why the drip comes back faster after a cheap replacement.
Yes, if the valve body is sound and the RP cartridge number is still in production. If the body is pitted or the trim line is discontinued, repair is a stopgap, and a replacement is the honest number.
A cartridge-only swap is a two-hour job when the stops close and the retainer is intact. A valve and trim replacement with drywall patch runs a full day. A shower or tub-to-shower scope runs three to seven days.
By the RP number on the cartridge or the model number on the trim plate, not by the shape of the handle. We order OEM or a documented aftermarket equivalent against that exact number, and the part number goes on your written scope so there’s no ambiguity at install.
We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side if your bathroom remodel expands past the shower.
Ready to price it? Call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate. We’ll put the price in writing before a tool comes out, walk you through exactly what the 365-Day Done Right Promise covers, and leave the site squared away when the work is done.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












