A Bradford company - serving Denton, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Delta · Denton

Delta Kitchen Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Kitchen Remodeling: The Denton Owner’s Guide

Kitchen remodeling in Denton that involves Delta-brand fixtures and finish hardware typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop square footage, and whether plumbing rough-in moves. We install and remodel around Delta products, and because material lead times for cabinetry and stone usually run several weeks, this is planned work – not same-day. What we do deliver fast is a written price before any tool comes out.

Contractor using a level to install a new residential door frame in Denton, TX

Call (844) 651-3175

Most Denton homeowners don’t start by shopping for a remodeling contractor. They start with a leaking Delta pull-down faucet, a chipped cabinet finish near the sink base, or a backsplash that’s separated because the substrate under it moved. A failing Delta faucet cartridge is the most common trigger we see: a slow drip at the base or a handle that no longer snaps back to center. One small part tells you the kitchen is past due for a real walkthrough.

Key Takeaways

  • Delta-specific kitchen work in Denton runs $14,000 to $45,000 installed; written price always comes first.
  • We’re an independent Denton contractor, not affiliated with Delta – we install around and alongside Delta fixtures.
  • Every project carries the 365-Day Done Right Promise: if the work fails within a year, we return and correct it at no charge.
  • Background-checked, uniformed technicians on every job; live person answers the phone 24/7.

Which Delta Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Delta’s kitchen line splits into two families that matter for a remodel: the faucet and sink hardware (Delta and the Delta Faucet sublines) and the accessories (soap dispensers, filtration taps, pot fillers). Delta kitchen faucets fall into recognizable series – the single-handle pull-down and pull-out models, and the two-handle deck-mount styles. Where owners get stuck is matching the right cartridge or aerator: Delta has changed cartridge geometry across generations even within one visual style, so a 1980s-era kitchen faucet and a 2010s one can look nearly identical and take completely different replacement cartridges.

To identify yours, read the label on the box or the original homeowner paperwork if it survived. If it didn’t, pull the faucet handle and photograph the cartridge housing, or measure the spout reach and base plate footprint. Those measurements – not the finish name – are what identify the correct replacement. OEM Delta parts carry the manufacturer spec; a quality aftermarket cartridge can work in a standard single-handle Delta kitchen faucet but often loses lifespan and finish tolerance. In a $14,000-plus kitchen remodel, we spec OEM. We’re not affiliated with Delta, and we don’t claim to stock Delta parts – we source what the model needs.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Kitchen Remodeling Is Failing

  • A drip at the faucet base or spout. Usually a worn cartridge or a failed O-ring inside the valve body. In Denton’s hard water, mineral scale accelerates cartridge wear, so a faucet that starts dripping tends to go fast.
  • A handle that won’t return to center. The cartridge is gummed or the friction ring has failed. You’ll notice it as a “loose” or stiff handle that no longer sits steady.
  • Lifting or hollow-sounding backsplash tile. The substrate behind the tile has water damage or the thinset bond failed. This is a remodel-scope problem, not a tile-only fix.
  • Soft or swollen cabinet boxes under the sink. Moisture from a slow Delta faucet or supply line leak has entered the cabinet substrate. Particleboard swells and doesn’t recover, which is why we replace rather than refinish that box.
  • Persistent low flow at the pull-down sprayer. Debris or scale in the aerator or diverter. Sometimes a clean-out fixes it; sometimes the internal diverter is worn and the whole head assembly needs replacing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A dining nook with a built-in banquette

Installed kitchen remodeling in Denton that incorporates or replaces Delta fixtures falls in these ranges. Every number is a written price before work starts – no figures that move at the door.

  • Full kitchen remodel: $14,000 – $45,000
  • Small kitchen remodel: $9,000 – $20,000
  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation: $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000

What drives the range: cabinet grade and layout, whether plumbing rough-in moves, countertop material (quartz and stone sit at the top; laminate at the bottom), and whether a failed Delta faucet has already damaged the sink base substrate. Parts and labor are itemized in your written quote, so you see the Delta fixture line and the labor line separately. The work is covered by the 365-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself. Confirm the faucet model, photograph the cartridge, tighten a loose supply connection by hand, and clean the aerator screen. Those cost nothing and rule out simple fixes.

Where DIY goes wrong with Delta kitchen work: pulling a cartridge that’s seized in a hard-water valve body can crack the housing, and water damage behind a backsplash or under a sink base is invisible until you start pulling material. One wrong move on a supply line in an older Denton home turns a $30 part into a cabinet replacement. If a faucet leak has already touched the cabinet substrate, that’s a remodel-scope call. Give us a call at (844) 651-3175 and we’ll give you a written price before anything starts.

FAQs

A home office with a built-in desk and shelves

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removedA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch