







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in The Colony, TX
Bradford Remodeling Co Denton handles independent Delta service across The Colony, TX, with work concentrated where Delta products actually fail in this town: shower valves, tub spouts, faucets and fixtures in 1970s to 1990s homes around Lewisville Lake. The thing that makes our Delta work in The Colony different is permit reality. Lakefront and lake-close lots here can trigger shoreline and floodplain review on top of the city permit, so a shower or tub replacement that would be a simple pull elsewhere takes planning. We’re independent, not affiliated with Delta, and we quote in writing before any work starts. Call (844) 651-3175 for a free estimate.

Why The Colony Residents Choose Us for Delta Service

We work on Delta products in The Colony every week: faucets, shower valves and fixtures across every tier Delta sells, from big-box Originals to the higher-end Trinsic and Cassidy lines. That volume matters. It means when a Monitor 17 series valve in a Teasley Lane-area home won’t hold temperature, we already know the likely culprit is the pressure-balance spool cartridge before we open the trim.
Because we’re independent, we tell you plainly when a Delta part is worth fixing and when it isn’t, without steering you toward whatever the brand happens to push. We favor genuine Delta OEM cartridges and repair kits for valves and diverters, since aftermarket spool cartridges commonly fail early. For cosmetic trim and handles, a quality aftermarket option is fine when OEM is discontinued.
Every quote is written before work begins. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. Technicians are background-checked and uniformed, so you know who’s at the door. A live person answers the phone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Solve in The Colony
- Seized or drifting Monitor shower valves. In 1970s-90s Colony homes, the pressure-balancing spool cartridge wears out, and the shower either won’t hold temperature or swings hot and cold when someone flushes a toilet. Years of North Texas hard water speed that wear. A new OEM cartridge usually restores balance without touching the rough-in.
- Kitchen faucet sprayer diverters and aerators. The diverters clog and drip, and aerators scale shut. The pull-down head O-rings harden, so the wand leaks at the joint. We replace the O-ring kit and clean or swap the aerator, which is a small job with a written price.
- Two-handle bath faucet seat-and-spring failures. Slow drips show up as water stains under the vanity or a soft cabinet floor. The seat-and-spring kit is cheap; catching the drip early is what saves the cabinet.
- Finish breakdown on lakefront homes. Chrome and Brilliance stainless pit and dull faster on properties close to Lewisville Lake, where humidity runs higher. The water is mineral-heavy rather than salty, but the air keeps those finishes wet longer.
- Out-of-square framing behind 1980s walls. Opening a wall around a Delta rough-in often reveals original framing that’s out of square. That’s a tile and substrate issue as much as a plumbing one, and it’s why we price the wall before we open it.
Delta Service in The Colony: What Local Conditions Mean for Your Equipment
Most of The Colony’s original lakefront and lakeside subdivisions, including the custom homes out on Stewart Peninsula, sit inside the Lewisville Lake floodplain. That changes the permit path for Delta shower and tub replacements near the water. A standard city permit isn’t the whole story: shoreline and floodplain review through the Corps of Engineers can apply, and that step simply doesn’t exist in inland towns like Frisco. On a lakefront lot, a tub-to-shower conversion can sit in review for weeks before a tile is set. We build that time into the schedule and tell you upfront. If you’re on the water and planning a Delta valve or shower change, start the permit conversation first. It’s the one part of the job that doesn’t go faster because the work is simple.
Delta Models & Products We Service in The Colony
We handle the Delta lines Colony homeowners actually have: the Trinsic widespread bathroom faucet, the Cassidy two-handle kitchen faucet, the Lahara shower trim with Monitor 17 series valve, and the Classic single-handle kitchen faucet, plus the Originals fixtures sold at big-box stores. For each job we source the right part: genuine Delta OEM cartridges and repair kits for valves and diverters, and quality aftermarket trim or handles only when OEM has been discontinued. We don’t claim to stock Delta parts locally. Parts get ordered to the job, so your written quote reflects the actual part number and price. When a rough-in valve body is cracked or a fixture is over 20 years old, replacement usually beats chasing parts, and we’ll say so.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in The Colony

A typical Delta shower job in a Colony home starts with a Monitor valve that’s lost its temperature balance or a tub spout that drips after two decades of hard water; the usual culprit is a worn pressure-balance cartridge or seat-and-spring kit. A qualified local pro pulls the trim, replaces the OEM cartridge, flushes the valve body, and often converts the tub to a walk-in shower with new tile and a Delta trim kit, building in extra permit time on lakefront lots. Here’s what those jobs run in The Colony:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives cost: whether the rough-in is sound, how much substrate and tile work the wall needs, fixture tier (a Trinsic widespread faucet costs more than a Classic), and whether shoreline or floodplain review applies. A free estimate comes with a written, itemized price before any work starts. Call (844) 651-3175 for an exact quote. Estimates are free.
Serving The Colony, TX – Our Local Coverage Area
We serve The Colony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Delta Construction in The Colony
My Delta Monitor shower valve won’t hold temperature in my 1980s Colony home – fix or replace? Fix it, in most cases. A Monitor valve that drifts hot and cold is usually a worn pressure-balance spool cartridge, not a failed valve body, so replacing the OEM cartridge solves the problem at a fraction of a full replacement. If the body itself is cracked, replacement wins. Call (844) 651-3175 for an exact quote. Estimates are free.
Does a lakefront Delta bathroom remodel in The Colony need extra permitting? Sometimes, yes. Lakefront and lake-close lots in the Lewisville Lake floodplain can trigger shoreline and floodplain review in addition to the normal city permit, which adds weeks. We flag it before the job is quoted so the timeline you get is real.
Can you replace just a Delta tub spout or is the whole cartridge set needed? Often just the spout. A dripping spout is frequently a worn seat-and-spring or a failed diverter, and that’s a small repair with a written price. If the drip traces back to the valve, we’ll tell you and quote the cartridge separately.
Will my Delta Brilliance finish hold up on a lakefront home? It holds up reasonably, but expect it to dull and pit faster than on an inland lot. Lake humidity keeps the finish wet longer, and mineral-heavy water leaves deposits that etch if left. Wiping fixtures dry and descaling regularly is the practical hedge, and a Brilliance stainless trim can be swapped later without tearing out the valve.
What does a Delta-based bathroom remodel cost in The Colony? A full bathroom remodel runs $9,000 – $28,000, a walk-in shower installation $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, and a vanity installation $800 – $3,000. Lakefront permitting and out-of-square 1980s framing push toward the top of those ranges. Call (844) 651-3175 for an exact quote. Estimates are free.
Service Areas Near The Colony
We also work Delta service in Frisco, Little Elm, Denton, Corinth and Highland Village, plus the neighborhoods around Providence Village and Paloma Creek South. Lakefront lots throughout this stretch of the Lewisville Lake shoreline deal with the same floodplain review, so the permit planning carries over.
Book Your Delta Service in The Colony Today
Whether it’s a Monitor valve that won’t hold temperature, a pull-down sprayer that won’t stop leaking, or a lakefront tub-to-shower conversion you’ve been putting off, call (844) 651-3175. A live person answers, day or night, and you’ll get a written price before any work starts. Estimates are free.
Written by the team at Bradford Remodeling Co Denton.












