







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Denton Owner’s Guide
A gut bathroom renovation in Denton with ES Windows-compatible materials, fixtures, and finish work runs $9,000 – $28,000 installed, depending on the scope. ES Windows is a window and door manufacturer, so the “ES Windows” part of a bath project is almost always about the glass – an obscure, fogged, or leaking ES unit that has to be resolved before tile, trim, or shower surrounds get set. That’s the discovery most Denton owners describe: the bathroom looks fine, then the window above the tub fogs from the inside, the sill softens, or a shower-side door starts sticking after a wet spring. We install bathroom remodels in Denton that account for what ES products actually do in Texas heat and humidity, and we put the price in writing before work starts.

Which ES Windows Models This Applies To

ES Windows made vinyl and aluminum units across a range of series, and the bathroom-specific complication is that many ES windows installed in Denton bathrooms are single-hung or fixed units with integral nailing fins – a flange that gets fastened to the framing and then buried behind siding and drywall. If you’re remodeling around an ES window, the fin type, rough opening dimensions, and whether the unit sits in a wet or dry location dictate the replacement approach. Some ES bath windows are in masonry openings; others are in a wood-framed wall with a tile return. Get the model right before ordering anything.
Identify the part this way:
- Look for the ES Windows label on the jamb or the glass edge – it carries the series and often the order number.
- Measure the rough opening (frame to frame, in the wall), not the glass. They are almost never the same number and misreading this is the most common ordering error we see.
- Note the frame depth and whether it’s a fin or finless unit – ES bath windows commonly sit deeper than standard because of tile and backer board.
For obvious reasons, when we can’t find a matching ES unit because the series has been discontinued or the profile differs, we install a quality equivalent that meets the same opening and energy spec rather than forcing a retrofit that flexes against the tile. We’re an independent service provider; Bradford Remodeling Co Denton is not affiliated with ES Windows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Bathroom Remodeling Is Failing
- Fogging between the panes. The sealed glass unit has lost its gas and the desiccant has failed. It’s cosmetic at first, then it means the glass is insulated no more.
- Soft or discolored sill and bottom plate. This is water intrusion, usually at the fin or at a failed bead of caulk. In Denton, north-facing bath windows hold moisture longer after a wet spring, so rot shows there first.
- Sticking shower-side door or window sash. Aluminum and vinyl expand in Texas heat, and a door that rubs the jamb by August tells you the frame has shifted.
- Condensation on the inside of the glass all winter. That means the unit is no longer sealed, or your bath ventilation is undersized for the square footage.
- Draft at the edges. The perimeter seal or fin has separated from the wall. You’ll feel it most on a cold snap before the heat kicks on.
We’ve repaired ES window failures in bathrooms across Denton where the real culprit was a missing slope on the exterior sill or a shower with no exhaust fan. Replacing the unit without addressing the water path is the mistake that gets repeated.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A bathroom remodel in Denton, including resolving an ES window in the wet zone, runs $9,000 – $28,000 installed. A smaller footprint bathroom remodel lands at $5,000 – $12,000. Standalone window replacement elsewhere in the home is $4,500 – $15,000, which is the reference point people use to think about a single ES unit. Window replacement, shower replacement ($3,000 – $8,500), and a tub-to-shower conversion ($3,500 – $10,000) are the line items that move the number most in Denton.

What drives the range: whether the window sits in a wet zone, the state of the substrate behind the tile, whether we’re re-framing a rough opening, the shower system you pick, and whether the exhaust needs a new run. The price we quote is written and final before a tool comes out. Our technicians have up to 22 years of experience, every project carries the 365-Day Done Right Promise, and if the work fails within that year, we return and correct it at no charge.
DIY or Call Us?
You can safely measure the rough opening, photograph the ES label, check for soft wood at the sill, and test the exterior caulk bead. You can check that the bath exhaust fan actually pulls – hold a tissue to the grille.
Where the DIY path breaks: removing or resealing a window that’s set in a wet-zone tile shower. Waterproofing there is not a caulk job. You have to rebuild the backer, the membrane, and the slope, and if any of those layers is skipped the wall behind the tile rots before you ever see it. We see it every month in Denton. A remodel that reopens a wet wall without the correct membrane is a redone job in two years. That work belongs with a trained crew using documented materials – KraftMaid, Cambria, and Silestone among them. Call (844) 651-3175 for a free, in-person estimate.
FAQs

How long does an ES Windows bathroom remodel take to finish in Denton?
A single-bath project, including the window, runs one to three weeks. A full gut with a shower system and new tile runs three to five weeks. We give you the schedule in writing with the price. Call (844) 651-3175 to schedule your free estimate.
Can you repair the ES window instead of replacing it?
Sometimes yes. A failed sash or weatherstrip can be repaired; a broken sealed glass unit needs the unit replaced. We tell you which one you have before you commit. Call (844) 651-3175 for an honest read on your unit.
How long does a bathroom window last in Texas?
A well-installed vinyl or aluminum unit lasts 20 to 25 years, but in Denton’s heat and summer humidity, the seal on a builder-grade unit often goes in 10 to 15. Exhaust ventilation and exterior sill slope are what add years.
How do you source the ES-compatible part?
We measure the rough opening and match it to the original spec, then source the closest match or an approved equivalent that fits the opening and meets the same energy rating. You see the spec before we order. Call (844) 651-3175 to get the process started.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












