







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Denton Owner’s Guide
If you own an ES Windows product and your kitchen remodel has stalled or failed around it, we install and repair ES Windows-compatible kitchen work in Denton at a typical installed price of $14,000 to $45,000, and we can usually schedule an assessment within the same week. Most Denton owners don’t call us because a window “looks bad.” They call because they’ve noticed water tracking across a sill after a hard rain, a frame that won’t square up with new cabinetry, or a seal that’s fogged from the inside and won’t clear. That’s the point where the window and the kitchen stop cooperating, and it’s exactly the kind of problem we handle. Bradford Remodeling Co Denton is an independent contractor and is not affiliated with ES Windows.

Which ES Windows Models This Applies To

ES Windows built its reputation on vinyl and aluminum-framed units that show up in a lot of North Texas kitchens from the late 1990s through the 2010s. The tricky part isn’t the window itself, it’s the rough opening. A replacement unit from a different manufacturer often won’t land in the same opening without shimming or reframing, which means your new KraftMaid cabinet run can end up out of plumb against a wall that used to be fine. Before we quote anything, we measure the rough opening, the finished opening, and the sill height, then cross-check the frame label inside the jamb. Most ES Windows units carry a model sticker on the head jamb or the sash edge. If that sticker is gone, the frame profile and the glazing spacer tell us which series it came from.
The OEM-versus-aftermarket call matters here. ES Windows-specific replacement sash and hardware are still available through a few supply channels, but lead times in Denton run longer than a standard retrofit and the price reflects it. A quality aftermarket unit that matches the opening spec is often the more sensible route, provided the frame dimensions, the weep system, and the sill pan all line up. We tell you which route we’re recommending and why, in writing, before we touch the kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
- Fogging between the panes. The insulated glass unit has lost its seal and the desiccant is saturated. Once that happens the window will never clear, and the fix is a new IGU, not a cleaning.
- Water staining or soft wood at the sill. The sill pan or the flashing at the rough opening has failed. In Denton’s spring storm pattern, water finds that gap fast and the damage spreads into the cabinet toe kick before you notice it.
- A frame that’s out of square with new cabinet lines. The window was set slightly off, or the wall has moved since. Cabinetry doesn’t forgive that, and the gap shows up at the countertop line.
- Sticking or hard-to-latch sashes. The frame has racked or the hardware has worn past adjustment. On older ES Windows vinyl units the sash rollers and the lock mechanism are the first parts to go.
- Condensation on the interior glass in mild weather. That’s usually a sign the unit’s thermal performance has degraded, not a humidity problem. It’s the earliest warning you’ll get before the seal fails outright.
Two things we check that a homeowner can spot on their own: the glazing spacer profile (aluminum versus a warm-edge design tells us the unit’s era) and whether the sill has any give when you press it. A soft sill is a flashing problem, and it’s a kitchen-wide problem, not a window problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Denton, installed, with the written price you get before any tool comes out:
- Full kitchen remodel tied to ES Windows replacement: $14,000 to $45,000
- Small kitchen remodel: $9,000 to $20,000
- Cabinet installation (KraftMaid or Wellborn): $4,000 to $13,000
- Countertop installation (Cambria, Caesarstone, or Silestone): $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
The range moves based on how much reframing the window opening needs, the cabinet line you choose, and whether the countertop goes stone or solid surface. The price you get is written down before work starts, and it doesn’t move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge, and that guarantee is in your hand, signed, at job close.
DIY or Call Us?
You can safely do a few things yourself. Press along the sill to check for softness. Check the model sticker in the jamb. Note where the water tracks after a rain. Take photos of the glazing spacer and the hardware. That’s diagnostic information, and it’s genuinely useful to us.
What you shouldn’t do is pull the frame yourself, replace an insulated glass unit on your own, or try to reframe an opening around a window that’s already out of square. That’s where a small repair turns into a cabinet realignment and a much bigger number. On a kitchen with new cabinetry in the mix, the sequencing matters, and getting it wrong costs more than the labor you saved. Call (844) 651-3175 and we’ll tell you straight whether it’s a repair or a replacement, with a written price before anything starts.
FAQs

Expect 15 to 25 years for a vinyl unit in this climate. North Texas heat cycling and spring hail load shorten that, and the seal usually goes before the frame does. Call (844) 651-3175 if you’re near that window and want an honest read on remaining life.
Often, yes. A failed seal means a new IGU, not a new window, and worn hardware can be swapped without touching the frame. A soft sill or a racked frame is a replacement conversation. We tell you which one you’re in before quoting. Call (844) 651-3175 for a free estimate.
A single-unit replacement is typically a one-day job; a full kitchen remodel tied to it runs several weeks depending on cabinet lead times. We give you the schedule in writing with the price. Call (844) 651-3175 to get that scheduled.
We cross-reference the frame label and the rough-opening measurements against available ES Windows-compatible units and quality aftermarket equivalents, then recommend the one that fits the spec. We don’t carry parts on a truck; every part is sourced to the job. Call (844) 651-3175 for a free estimate.
No. You get a written price before any work begins, and structural surprises discovered mid-job are quoted and approved before we proceed. That’s The Garrison Standard, and it’s non-negotiable. Call (844) 651-3175 to get the number in writing.
We also handle KraftMaid, Cambria, and Silestone work in Denton alongside ES Windows-compatible installations, and every job is backed by background-checked, uniformed technicians and live-person phone coverage around the clock. Call (844) 651-3175 to schedule your free estimate and get the price squared away in writing before anything starts.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












